Deutsch 
- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Description
Technical data of the M36x2 manual threader
| Technical data | |
|---|---|
| Nominal diameter d1 mm | M36 |
| Thread pitch P mm | 2 mm |
| Overall length l1 | 144 mm |
| Length of working part l2 | 39 mm |
| Diameter of shank part d2 | 25 mm |
| Size of square drive a | 20 mm |
| Threaded bore diameter | 34 mm |
| Thread angle G | 60 degrees |
| Thread standard | ISO DIN 13 |
| Thread tolerance | ISO2 6H |
M36x2 fine thread hand taps
Hand Tap M36X2 DIN 2181/2 6H high-speed steel, is designed for making metric M36 fine-coil threads with a pitch of two millimeters in steels up to eight hundred mega pascals; in workshop practice, a predictable process is ensured here Hand Tap M36x2 run in two passes.
Key data: nominal diameter of thirty-six millimeters and stroke of two millimeters; outline angle of sixty degrees in accordance with ISO 68-1; bore tolerance field of class six H according to ISO 965. Right-handed execution, with straight chip grooves to promote uniform evacuation. Ground high-speed steel maintains edge sharpness and reduces micro chipping. A two-stage solution based on DIN 2181/2 - an inserting part and a finishing part - stabilizes alignment and equalizes torsional loads, while Set Taps handheld M36x2 organizes the sequence of passes and facilitates quality control. Preparatory drilling: thirty-four millimeters; lubrication with emulsion or active oil recommended.
- Uniform profile forming - separation into an introduction and finishing pass reduces torque pulsation and the risk of jamming.
- Order and speed - clear member markings shorten selection; M36x2 Hand Tapping Set facilitates rotation between stages.
- Maintains sharpness - High-speed steel retains low edge micro roughness after grinding, supporting long runs between sharpening.
- Class six H fit - effective diameter maintained within tolerance area facilitates positivepass/fail test.
Meeting the requirements of DIN 2181/2 (execution), ISO 68-1 (sixty-degree outline) and ISO 965 (bore tolerances class six H) ensures interoperability with measuring equipment and predictable results in unit and short-run machining.
M36x2 thread cutting stages in a 2-piece set: peeler and finisher
Frequently asked questions
1. What does the M36x2 set include?
The set consists of two thread cutters - a peeler and a finisher, which, when used in succession, guarantee full thread formation.
2. Is the M36x2 threader suitable for blind holes?
Yes, the set can be used in both through-holes and blind holes, according to DIN 2181 and class 6H.
3. What is the correct order of work and parameters for manual guidance?
First the ripper (guiding and starting the outline), then the intermediate, and finally the finisher; recommended backing off half a turn every 1-2 turns to break the chip, guiding in the knob perpendicular to the surface, and constant lubrication throughout the threading run.
Product accessories
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
