Deutsch 
- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Description
Technical data of the M46x2 manual threader
| Technical data | |
|---|---|
| Nominal diameter d1 mm | M46 |
| Thread pitch P mm | 2 mm |
| Overall length l1 | 140 mm |
| Length of working part l2 | 43 mm |
| Diameter of shank part d2 | 36 mm |
| Size of square drive a | 29 mm |
| Threaded bore diameter | 44 mm |
| Thread angle G | 60 degrees |
| Thread standard | ISO DIN 13 |
| Thread tolerance | ISO2 6H |
M46x2 fine thread hand taps
Hand Tap M46X2 DIN 2181/2 6H HSS is designed for making M46 metric internal threads with a pitch of two millimeters in structural steels up to eight hundred mega pascal; the two-member working sequence stabilizes loads and promotes the maintenance of a six H class fit.
Working specifications: nominal diameter forty-six millimeters; stroke two millimeters; sixty-degree outline according to ISO 68-1; bore tolerance field class 6H according to ISO 965; right-hand design; straight chip grooves directing the chip evenly out of the cutting zone. Ground high-speed steel maintains low micro roughness and reduces micro chipping. According to DIN 2181/2, the run is divided into an introductory I and finishing II section; Recommended drill bit for thread: forty-four millimeters; lubrication with emulsion or active oil improves coil bottom finish and edge life.
- 6H field fit - controlled effective diameter promotes a positive pass/fail result.
- Order and standardization - Set Taps Manual M46x2 with clear member markings unifies the sequence of operations and speeds up dimensional control.
- Smooth outline formation - the division intoan introductory and final stage extinguishes torque fluctuations and reduces rubbing on the full profile.
- Longer work readiness - precision grinding of high-speed steel slows abrasion and material sticking.
Compliance with DIN 2181/2, ISO 68-1 and ISO 965 (6H field) ensures interoperability with measuring equipment, and working with the M46x2 Hand Tapping Set maintains a stable thread outline and repeatable dimensions in short runs and unit runs.
M46x2 thread cutting stages in the 2-piece set: ripper and finisher
Frequently asked questions
1. What does the M46x2 set contain ?
The set consists of two thread cutters - a peeler and a finisher, which, when used in succession, guarantee full thread formation.
2. For what materials is the M46x2 tapping tool designed ?
The HSS tool works well in machining low-carbon steel, aluminum, brass and other materials with good machinability.
3. What are the advantages of being made of HSS ?
HSS high-speed steel provides high durability, wear resistance and stable operation even in demanding conditions.
Product accessories
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
