- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Hand Tap M11x1.25 DIN 2181/2 6H HSS
5664
Thread size: M11x1,25172 sizes of this tap
M1x0,2M1,2x0,2M1,4x0,2M1,6x0,2M1,7x0,2M1,8x0,2M2x0,25M2,2x0,25M2,2x0,35M2,3x0,25M2,3x0,35M2,5x0,35M3x0,35M3,5x0,35M4x0,5M4,5x0,5M5x0,5M5,5x0,5M6x0,5M6x0,75M7x0,5M7x0,75M8x0,5M8x0,75M8x1M9x0,5M9x0,75M9x1M10x0,5M10x0,75M10x1M10x1,25M11x0,75M11x1M11x1,25M12x0,5M12x0,75M12x1M12x1,25M12x1,5M13x1M13x1,25M14x0,75M14x1M14x1,25M14x1,5M15x1M15x1,5M16x0,75M16x1M16x1,25M16x1,5M17x1M17x1,5M17x2M18x0,75M18x1M18x1,25M18x1,5M18x2M19x1M19x1,5M20x0,75M20x1M20x1,25M20x1,5M20x2M21x1,5M22x1M22x1,25M22x1,5M22x1,75M22x2M24x1M24x1,5M24x2M25x1M25x1,5M25x2M26x1M26x1,25M26x1,5M26x2M27x1M27x1,5M27x2M28x1M28x1,5M28x2M30x1M30x1,5M30x2M30x2,5M30x3M32x1,5M32x2M32x3M33x1,5M33x2M33x3M34x1,5M34x2M35x1,5M36x1M36x1,5M36x2M36x3M38x1,5M38x2M38x3M39x1M39x1,5M39x2M39x3M40x1,5M40x2M40x3M42x1,5M42x2M42x3M42x4M45x1,5M45x2M45x3M45x4M46x1,5M46x2M48x1,5M48x2M48x3M48x4M50x1,5M50x2M50x3M52x1M52x1,5M52x2M52x3M52x4M55x2M55x3M56x1,5M56x2M56x3M56x4M58x2M58x4M60x1,5M60x2M60x3M62x1,5M62x2M62x3M62x4M64z1,5M64x2M65x2M65x4M68x1,5M68x2M68x3M68x4M70x1,5M70x2M72x1,5M72x4M75x1,5M75x2M76x1,5M80x1,5M85x2M90x2
€32.37 tax inc.
Net price: €26.32
Description
Technical data for the M11x1.25 hand tap
| Technical data | |
|---|---|
| Nominal diameter d1 mm | M11 |
| Thread pitch P mm | 1.25 mm |
| Overall length l1 | 63 mm |
| Flute length l2 | 20 mm |
| Shank diameter d2 | 8 mm |
| Square drive size a | 6.2 mm |
| Tap drill diameter | 9.75 mm |
| Thread angle G | 60° |
| Tap tolerance | ISO2 6H |
Roughing tap and finishing tap – how much material each removes
Division of work in the 1–2 set
The M11x1.25 thread is cut into the wall of a hole with a diameter of 9.75 mm. The thread groove extends 0.625 mm into the wall. A single tap would have to cut the entire groove at once, requiring substantial hand torque and risking breakage. The set divides this work into two passes.
The drawing shows the entire set in operation. Both taps have the same shank and the same length. They differ in their chamfer, the tapered tip: No. 1 has a chamfer spanning 8 threads, while No. 2 spans only 2 threads. The detail windows at the hole wall show how the thread groove deepens after each tap.
| Tap | Chamfer | Chamfer angle | Material removed | How it works in the hole |
|---|---|---|---|---|
| No. 1 – roughing tap | long, 8 threads | 5° | the main portion of the groove | enters smoothly and establishes thread alignment |
| No. 2 – finishing tap | short, 2 threads | 20° | the remainder, to the full profile | follows the cut threads and produces the full 6H profile |
How to distinguish the taps in the set
The chamfer on No. 1 is 4 times as long as the chamfer on No. 2 — the difference is immediately visible when you place them side by side. No. 1 has an incomplete thread profile; only No. 2 has the full profile. The number is also indicated on the shank: No. 1 has one ring, No. 2 has none. Keep the set together and always start with the roughing tap.
How to tap an M11x1.25 hole – sequence 1, 2
Hand tapping step by step
Thread M11x1.25 in four steps
ØDrilling
Drill bit 9.75 mm
1Roughing tap
Chamfer 8 threads
2Finishing tap
Chamfer 2 threads
✓Finished thread
Tolerance 6H
Turning sequence: half a turn clockwise, a quarter turn counterclockwise | Between taps: remove chips from the hole
Start with the hole. The drill diameter is easy to calculate: thread diameter 11 mm minus pitch 1.25 mm gives 9.75 mm. An undersized hole is a common cause of a tap twisting off in the workpiece.
Through hole or blind hole – how deep to drill
The set taps both types of holes. In a through hole, the thread extends through the full material thickness. In a blind hole, cut the thread to 27.5 mm, or 2.5 times the thread diameter (2.5 x 11 mm, shown as 2.5D in the drawing). Drill the hole deeper than the thread. The finishing tap has a chamfer spanning 2 threads, so approx. 2 incomplete threads remain near the bottom. The extra depth below the thread accommodates them along with the chips.
No. 1 – the roughing tap establishes thread alignment
Fit the roughing tap in the tap wrench and position it perpendicular to the surface. Check the angle from two sides, for example with a square. Turn half a turn clockwise, then a quarter turn counterclockwise. Reversing breaks the chip into short pieces – a slight crunch is normal. The first threads determine whether the thread will be straight.
No. 2 – the finishing tap produces the full profile
Back out the roughing tap and remove chips from the hole. Screw the finishing tap into the cut threads by hand – it should engage them on its own. Continue turning at the same rhythm as with the roughing tap. The finishing tap removes the remaining material and cuts the groove to the full profile within tolerance 6H. When it screws in smoothly all the way, the thread is complete – check it with an M11x1.25 screw.
M11x1.25 fine-thread hand taps
Hand Tap M11x1.25 is used to produce internal metric fine threads with a pitch of 1.25 mm and a 60° profile; in assembly applications, the M11x1.25 hand tap supports profile accuracy in joints with increased fit requirements.
The 2-piece set includes a roughing tap (longer chamfer) and a finishing tap (shorter chamfer); straight flutes; square shank for a tap wrench; high-speed steel (HSS) resistant to variable loads; manufacturing tolerance 6H (mating with 6g). Compliance: 60° profile per ISO 68-1, dimensions and pitches per ISO 261/262, internal thread tolerances per ISO 965; construction per DIN 352. Recommended tap drill: 9.75 mm. Recommended materials: low-carbon steels, aluminum, brass, copper.
For stable thread geometry, maintain axial alignment, use a low-viscosity coolant, and regularly break the chips with a reverse-and-advance cycle, reducing the risk of edge tearing in blind holes and improving directional guidance.
- Dimensional accuracy — class 6H provides predictable clearance with 6g and a full thread profile along the entire length.
- Safe sequence — staged cutting reduces torque on the cutting edges; M11x1.25 hand tap set facilitates guidance in delicate workpieces.
- High durability — HSS allows resharpening and maintains consistent surface quality under variable loads.
- Efficient chip evacuation — straight flutes facilitate reverse-and-advance cycles, reducing jamming.
M11x1.25 hand tap set with a tolerance of 6H and a 60° profile, maintains repeatable geometry and surface quality.
Stages of cutting an M11x1.25 thread with a 2-piece set: roughing tap and finishing tap
Frequently asked questions
The set consists of two taps — a roughing tap and a finishing tap, which guarantee a fully formed thread when used in sequence.
Yes, the set can be used in both through holes and blind holes, in accordance with DIN 2181 and class 6H.
The HSS tool works well in low-carbon steel, aluminum, brass, and other materials with good machinability.
Product accessories
Tapered countersink 16.5/90 DIN 335 C HSS
Reference: 11247 In stock > 10 items
€9.74
€11.98 brutto
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.