Polski 
- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Machine Tap M14x1 DIN 374 C SE
0000008847
Thread size: M14x175 sizes of this tap
M3x0,35M3,5x0,35M4x0,5M5x0,5M6x0,75M8x0,75M8x1M10x0,5M10x0,75M10x1M10x1,25M11x1M12x1M12x1,25M12x1,5M14x1M14x1,25M14x1,5M15x1M15x1,5M16x0,75M16x1M16x1,5M16x1,75M17x0,75M17x1M18x1M18x1,25M18x1,5M18x2M19x1M20x1M20x1,25M20x1,5M20x2M22x1M22x1,5M22x2M23x1,25M24x1M24x1,5M24x2M25x1M25x1,5M25x2M27x1M27x1,5M27x2M28x1M28x1,5M28x2M30x1M30x1,5M30x2M32x1,5M32x2M33x1,5M33x2M34x1,5M35x1,5M36x1,5M36x2M36x3M38x1,5M39x1M39x1,5M40x1,5M42x2M48x1,5M48x2M48x3M50x1,5M52x1,5M52x3M56x3
€20.07 tax inc.
Net price: €16.32
Description
Material HSSE
Thread size M14x1
ChamferC (2–3) threads
Standard DIN 374
Technical data for the M14x1 HSSE INOX general-purpose machine tap
| Technical Data | |
|---|---|
| Nominal Diameter d1 | M14x1 |
| Thread Pitch P | 1 mm |
| Overall Length l1 | 100 mm |
| Flute Length l2 | 20 mm |
| Shank Diameter d2 | 11 mm |
| Square Drive Size a | 9 mm |
| Tap Drill Diameter | 13 mm |
| Chamfer | C (2÷3) P |
| Thread tolerance | 6H |
Where chips remain in a straight-flute tap
The flute holds the chips until the tap is reversed out
The straight flute runs parallel to the tap axis. There is no helix to carry chips upward. The chamfer cutting edges are not ground at an angle, so they do not push chips downward. Short chips break into fragments and remain in the flute, next to the cutting edges that produced them. They leave the hole only when the tap is backed out. The M14x1 tap has a reduced shank to DIN 374: diameter 11 mm, square size 9 mm.
1
Straight flute – chips remain in the flute, next to the cutting edges that produced them.
2
Chamfer C: 2–3 incomplete threads on the tapered lead.
3
The tap rotates clockwise to cut a right-hand thread.
4
Individual fragments exit at the top, onto the workpiece surface.
5
A few fragments fall below the tip and exit through the bottom of the hole.
6
Feed 1 mm/rev, equal to the pitch of the M14x1 thread.
M14x1 INOX machine tap – tool for precision tapping
This model from the HSSE series is designed for cutting M14x1 metric fine threads in stainless and structural steels and features a pitch of 1 mm. The M14x1 INOX machine tap features a greater number of threads per unit length, providing higher joint load capacity and better leak tightness. With 5% cobalt, the tool maintains a hardness of 66 HRC even at temperatures up to 650°C in the cutting zone. Form C with straight flutes provides versatile use. The M14x1 HSSE machine tap is intended for manufacturers of hydraulic and pneumatic components.
Key benefits of the M14x1 INOX tap
- Compatibility with ER25 holders collets and synchronized tapping chucks for CNC machining centers with automatic tool change
- Material versatility covering austenitic stainless steels 304 and 316, structural steels up to 800 MPa and nonferrous metals such as aluminum and brass
- Durability increased by the addition of cobalt in HSSE steel allows 400-600 threads to be cut in structural steel with proper emulsion cooling
- Precision to tolerance class 6H for demanding fit tolerances in series production of mechanical, hydraulic and pneumatic components
- Compliance with DIN 374 for fine threads ensures standardized shank dimensions and interchangeability with tools from European manufacturers
- M14x1 general-purpose machine tap with form C allows tapping of through holes and blind holes without changing the tool or parameters
The M14x1 machine tap for through and blind holes is used in automotive series production and on assembly lines requiring high repeatability. It is suitable for components requiring leak-tightness and resistance to self-loosening. The tap drill diameter for the M14x1 thread is 13 mm.
Cutting data for the M14x1 HSSE INOX general-purpose machine tap
| Material | Cutting speed Vc [m/min] | Spindle speed n [rpm] | Feed f [mm/min] |
|---|---|---|---|
| PSteel | 5-20 | 114-455 | 114-455 |
| MStainless steel / INOX | 5-10 | 114-227 | 114-227 |
| KCast iron | 5-15 | 114-341 | 114-341 |
| NAluminum | 10-25 | 227-568 | 227-568 |
Thread preparation M14x1
1 Spot drilling
NC spotting drill 90°
2 Drilling
Ø 13 mm
3 Tapping
M14x1
✓ Done!
Tolerance 6H
Standard: DIN 374 | Chamfer: C (straight) | Application: general-purpose (through and blind holes)
Tolerance 6H — metric thread tolerance classes
| Class | Accuracy | Application | Status |
|---|---|---|---|
| 4H / 4g | High | Precision connections, hydraulics | — |
| 6H / 6g | Standard | Machine building, general-purpose | SELECTED |
| 7H / 8g | Low | Large clearance, easy assembly | — |
6H = internal thread (nut, hole) | 6g = external thread (screw)
Frequently asked questions
With proper cooling and lubrication, the M14x1 HSSE tap cuts 400-600 threads in structural steel or 250-350 threads in stainless steel. Dry operation reduces tool life by 40-50%.
Yes, the M14x1 HSSE tap with 5% cobalt is designed for austenitic stainless steels 304 and 316. The addition of cobalt increases heat resistance in the cutting zone to 650°C.
An HSSE tap contains 5% cobalt, which increases hardness from 64 to 66 HRC and heat resistance to 650°C. HSSE is suitable for stainless steels, while HSS is suitable only for structural steels up to 800 MPa.
Product accessories
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.