- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
navigate_next
navigate_next
navigate_next
Machine Tap M50x1.5 DIN 374 C HSSE
Narex Zdanice spol. s r.o. Narex Zdanice spol. s r.o.
0000007171
Thread size: M50x1,575 sizes of this tap
M3x0,35M3,5x0,35M4x0,5M5x0,5M6x0,75M8x0,75M8x1M10x0,5M10x0,75M10x1M10x1,25M11x1M12x1M12x1,25M12x1,5M14x1M14x1,25M14x1,5M15x1M15x1,5M16x0,75M16x1M16x1,5M16x1,75M17x0,75M17x1M18x1M18x1,25M18x1,5M18x2M19x1M20x1M20x1,25M20x1,5M20x2M22x1M22x1,5M22x2M23x1,25M24x1M24x1,5M24x2M25x1M25x1,5M25x2M27x1M27x1,5M27x2M28x1M28x1,5M28x2M30x1M30x1,5M30x2M32x1,5M32x2M33x1,5M33x2M34x1,5M35x1,5M36x1,5M36x2M36x3M38x1,5M39x1M39x1,5M40x1,5M42x2M48x1,5M48x2M48x3M50x1,5M52x1,5M52x3M56x3
€157.96 tax inc.
Net price: €128.42
Instant Shipping
W magazynie: 2 pcs.
Description
Material HSSE
Thread size M50x1.5
ChamferC (2–3) threads
Standard DIN 374
Technical data for the M50x1.5 HSSE INOX general-purpose machine tap
| Technical Data | |
|---|---|
| Nominal Diameter d1 | M50x1.5 |
| Thread Pitch P | 1.5 mm |
| Overall Length l1 | 190 mm |
| Flute Length l2 | 30 mm |
| Shank Diameter d2 | 36 mm |
| Square Drive Size a | 29 mm |
| Tap Drill Diameter | 48.5 mm |
| Chamfer | C (2÷3) P |
| Thread tolerance | 6H |
Where chips remain in a straight-flute tap
The flute holds the chips until the tap is reversed out
The straight flute runs parallel to the tap axis. There is no helix to carry chips upward. The chamfer cutting edges are not ground at an angle, so they do not push chips downward. Short chips break into fragments and remain in the flute, next to the cutting edges that produced them. They leave the hole only when the tap is backed out. The M50x1.5 tap has a reduced shank to DIN 374: diameter 36 mm, square size 29 mm.
1
Straight flute – chips remain in the flute, next to the cutting edges that produced them.
2
Chamfer C: 2–3 incomplete threads on the tapered lead.
3
The tap rotates clockwise to cut a right-hand thread.
4
Individual fragments exit at the top, onto the workpiece surface.
5
A few fragments fall below the tip and exit through the bottom of the hole.
6
Feed 1.5 mm/rev, equal to the pitch of the M50x1.5 thread.
M50x1.5 INOX machine tap – HSSE tool for CNC machining
The M50x1.5 INOX machine tap is a professional tool for cutting M50 internal threads with a fine pitch of 1.5 mm in stainless and structural steels. Its HSSE high-speed steel construction with 5% cobalt provides a hardness of 66 HRC and high resistance to cutting zone temperatures up to 650°C. Form C with straight flutes allows tapping of both through holes and blind holes without changing tools. The 6H tolerance in accordance with DIN 374 guarantees dimensional repeatability. The M50x1.5 general-purpose machine tap is designed for toolrooms and CNC machining center operators.
Key advantages of the M50x1.5 tap for through holes and blind holes
- Fine pitch of 1.5 mm provides the maximum number of threads per unit length at large diameters, improving joint sealing and load capacity
- Durability and heat resistance thanks to HSSE steel with 5% cobalt, which maintains its cutting properties at temperatures up to 650°C in the contact zone
- Precision to tolerance class 6H guarantees the dimensional accuracy required in the production of hydraulic power components and high-quality industrial valves and fittings
- Compatibility with ER40 holders and tapping chucks with axial compensation for synchronous tapping on CNC and conventional machines
- Designed for stainless steels austenitic grades 304 and 316 and ferritic grades, which require tools with increased heat and abrasion resistance
- M50x1.5 HSSE machine tap with form C evacuates chips properly in through holes and blind holes without the risk of thread damage
The M50x1.5 machine tap for through holes and blind holes is used in the production of industrial valves and fittings and hydraulic power components. Cooling with an EP emulsion at a minimum concentration of 8% extends tool life. The tap drill diameter for the M50x1.5 thread is 48.5 mm.
Cutting data for the M50x1.5 HSSE INOX general-purpose machine tap
| Material | Cutting speed Vc [m/min] | Spindle speed n [rpm] | Feed f [mm/min] |
|---|---|---|---|
| PSteel | 5-20 | 32-127 | 48-190 |
| MStainless steel / INOX | 5-10 | 32-64 | 48-96 |
| KCast iron | 5-15 | 32-95 | 48-142 |
| NAluminum | 10-25 | 64-159 | 96-238 |
Thread preparation M50x1.5
1 Spot drilling
NC spotting drill 90°
2 Drilling
Ø 48.5 mm
3 Tapping
M50x1.5
✓ Done!
Tolerance 6H
Standard: DIN 374 | Chamfer: C (straight) | Application: general-purpose (through and blind holes)
Tolerance 6H — metric thread tolerance classes
| Class | Accuracy | Application | Status |
|---|---|---|---|
| 4H / 4g | High | Precision connections, hydraulics | — |
| 6H / 6g | Standard | Machine building, general-purpose | SELECTED |
| 7H / 8g | Low | Large clearance, easy assembly | — |
6H = internal thread (nut, hole) | 6g = external thread (screw)
Frequently asked questions
The M50x1.5 HSSE tap is suitable for austenitic stainless steels 304 and 316, structural steels up to 800 MPa, ductile cast iron, and aluminum and brass alloys. It is not recommended for hardened steels above 45 HRC.
The nominal tap drill diameter for the M50x1.5 thread is 48.5 mm. The hole tolerance range should be 48.4–48.6 mm. A hole at the lower tolerance limit produces a fuller thread profile, while one at the upper limit reduces tapping torque.
The M50x1.5 tap works with ER40 holders and tapping chucks with axial compensation. Synchronized heads with automatic tool change capability are recommended for CNC machines.
Product accessories
Hand Tap M50X1.5 DIN 2181/2 6H HSS Varel
Reference: 913251 In stock < 10 items
€205.26
€252.47 brutto
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Machine Tap M50x1.5 DIN 374 C HSSE Podgląd zdjęć produktu
01 / 01
Powiększenie 100%
Użyj strzałek, aby zmieniać zdjęcia. Powiększaj przyciskami albo gestem szczypania. Zamknij galerię klawiszem Escape.
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.