Polski 
- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Machine Tap M10x0.5 DIN 374 C HSSE
13506
Thread size: M10x0,575 sizes of this tap
M3x0,35M3,5x0,35M4x0,5M5x0,5M6x0,75M8x0,75M8x1M10x0,5M10x0,75M10x1M10x1,25M11x1M12x1M12x1,25M12x1,5M14x1M14x1,25M14x1,5M15x1M15x1,5M16x0,75M16x1M16x1,5M16x1,75M17x0,75M17x1M18x1M18x1,25M18x1,5M18x2M19x1M20x1M20x1,25M20x1,5M20x2M22x1M22x1,5M22x2M23x1,25M24x1M24x1,5M24x2M25x1M25x1,5M25x2M27x1M27x1,5M27x2M28x1M28x1,5M28x2M30x1M30x1,5M30x2M32x1,5M32x2M33x1,5M33x2M34x1,5M35x1,5M36x1,5M36x2M36x3M38x1,5M39x1M39x1,5M40x1,5M42x2M48x1,5M48x2M48x3M50x1,5M52x1,5M52x3M56x3
€27.51 tax inc.
Net price: €22.37
Description
Material HSSE
Thread size M10x0.5
ChamferC (2–3) threads
Standard DIN 374
Technical data for the M10x0.5 HSSE INOX general-purpose machine tap
| Technical Data | |
|---|---|
| Nominal Diameter d1 | M10x0.5 |
| Thread Pitch P | 0.5 mm |
| Overall Length l1 | 90 mm |
| Flute Length l2 | 18 mm |
| Shank Diameter d2 | 7 mm |
| Square Drive Size a | 5.5 mm |
| Tap Drill Diameter | 9.5 mm |
| Chamfer | C (2÷3) P |
| Thread tolerance | 6H |
Where chips remain in a straight-flute tap
The flute holds the chips until the tap is reversed out
The straight flute runs parallel to the tap axis. There is no helix to carry chips upward. The chamfer cutting edges are not ground at an angle, so they do not push chips downward. Short chips break into fragments and remain in the flute, next to the cutting edges that produced them. They leave the hole only when the tap is backed out. The M10x0.5 tap has a reduced shank to DIN 374: diameter 7 mm, square size 5.5 mm.
1
Straight flute – chips remain in the flute, next to the cutting edges that produced them.
2
Chamfer C: 2–3 incomplete threads on the tapered lead.
3
The tap rotates clockwise to cut a right-hand thread.
4
Individual fragments exit at the top, onto the workpiece surface.
5
A few fragments fall below the tip and exit through the bottom of the hole.
6
Feed 0.5 mm/rev, equal to the pitch of the M10x0.5 thread.
M10x0.5 INOX machine tap – with a metric fine thread
The HSSE series designed for manufacturing engineers and CNC operators working with precision connections includes the M10x0.5 INOX machine tap for metric fine threads. The 6H tolerance in accordance with DIN 374 guarantees the dimensional repeatability required in the manufacture of hydraulic and pneumatic components with stringent leak-tightness requirements. The thread pitch of 0.5 mm provides more threads per unit length, increasing the load capacity of the connection and resistance to self-loosening. Its HSSE steel construction with 5% cobalt guarantees a hardness of 66 HRC and long cutting edge life in stainless steels.
Key features of the M10x0.5 INOX tap
- Compliance with DIN 374 for metric fine threads ensures standardized dimensions and full interchangeability with tools from European manufacturers
- Designed for hydraulic connections and pneumatic components requiring high leak-tightness thanks to the increased number of threads per unit length
- Precision of the 6H tolerance required in the production of hydraulic housings, valve blocks, and components for high-pressure industrial valves and fittings
- Durability thanks to HSSE steel with 5% cobalt allows 350-500 threads to be produced in structural steel with proper lubrication using tapping oil
- Compatibility with ER16 holders and tapping heads for CNC machining centers with synchronous tapping and axial compensation
- M10x0.5 general-purpose machine tap with form C directs chips correctly in both through holes and blind holes
The M10x0.5 HSSE machine tap is designed for machining structural steels up to 800 MPa, 304 and 316 austenitic stainless steels, and aluminum alloys. The M10x0.5 machine tap for through and blind holes is not recommended for hardened steels above 45 HRC. The tap drill diameter is 9.5 mm.
Cutting data for the M10x0.5 HSSE INOX general-purpose machine tap
| Material | Cutting speed Vc [m/min] | Spindle speed n [rpm] | Feed f [mm/min] |
|---|---|---|---|
| PSteel | 5-20 | 159-637 | 80-318 |
| MStainless steel / INOX | 5-10 | 159-318 | 80-159 |
| KCast iron | 5-15 | 159-477 | 80-238 |
| NAluminum | 10-25 | 318-796 | 159-398 |
Thread preparation M10x0.5
1 Spot drilling
NC spotting drill 90°
2 Drilling
Ø 9.5 mm
3 Tapping
M10x0.5
✓ Done!
Tolerance 6H
Standard: DIN 374 | Chamfer: C (straight) | Application: general-purpose (through and blind holes)
Tolerance 6H — metric thread tolerance classes
| Class | Accuracy | Application | Status |
|---|---|---|---|
| 4H / 4g | High | Precision connections, hydraulics | — |
| 6H / 6g | Standard | Machine building, general-purpose | SELECTED |
| 7H / 8g | Low | Large clearance, easy assembly | — |
6H = internal thread (nut, hole) | 6g = external thread (screw)
Frequently asked questions
The M10x0.5 HSSE tap is suitable for austenitic stainless steels 304 and 316, structural steels up to 800 MPa, ductile cast iron, and aluminum and brass alloys. It is not recommended for hardened steels above 45 HRC.
The nominal tap drill diameter for the M10x0.5 thread is 9.5 mm. The hole tolerance range should be 9.4–9.6 mm. A hole at the lower tolerance limit produces a fuller thread profile, while one at the upper limit reduces tapping torque.
The M10x0.5 tap works with ER20 holders and tapping chucks with axial compensation. Synchronized heads with automatic tool change capability are recommended for CNC machines.
Product accessories
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.