- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
navigate_next
navigate_next
navigate_next
Machine Tap M34x1.5 DIN 374 C HSSE
Narex Zdanice spol. s r.o. Narex Zdanice spol. s r.o.
12920
Thread size: M34x1,575 sizes of this tap
M3x0,35M3,5x0,35M4x0,5M5x0,5M6x0,75M8x0,75M8x1M10x0,5M10x0,75M10x1M10x1,25M11x1M12x1M12x1,25M12x1,5M14x1M14x1,25M14x1,5M15x1M15x1,5M16x0,75M16x1M16x1,5M16x1,75M17x0,75M17x1M18x1M18x1,25M18x1,5M18x2M19x1M20x1M20x1,25M20x1,5M20x2M22x1M22x1,5M22x2M23x1,25M24x1M24x1,5M24x2M25x1M25x1,5M25x2M27x1M27x1,5M27x2M28x1M28x1,5M28x2M30x1M30x1,5M30x2M32x1,5M32x2M33x1,5M33x2M34x1,5M35x1,5M36x1,5M36x2M36x3M38x1,5M39x1M39x1,5M40x1,5M42x2M48x1,5M48x2M48x3M50x1,5M52x1,5M52x3M56x3
€79.30 tax inc.
Net price: €64.47
Brak w magazynie
Description
Material HSSE
Thread size M34x1.5
ChamferC (2–3) threads
Standard DIN 374
Technical data for the M34x1.5 HSSE INOX general-purpose machine tap
| Technical Data | |
|---|---|
| Nominal Diameter d1 | M34x1.5 |
| Thread Pitch P | 1.5 mm |
| Overall Length l1 | 170 mm |
| Flute Length l2 | 32 mm |
| Shank Diameter d2 | 28 mm |
| Square Drive Size a | 22 mm |
| Tap Drill Diameter | 32.5 mm |
| Chamfer | C (2÷3) P |
| Thread tolerance | 6H |
Where chips remain in a straight-flute tap
The flute holds the chips until the tap is reversed out
The straight flute runs parallel to the tap axis. There is no helix to carry chips upward. The chamfer cutting edges are not ground at an angle, so they do not push chips downward. Short chips break into fragments and remain in the flute, next to the cutting edges that produced them. They leave the hole only when the tap is backed out. The M34x1.5 tap has a reduced shank to DIN 374: diameter 28 mm, square size 22 mm.
1
Straight flute – chips remain in the flute, next to the cutting edges that produced them.
2
Chamfer C: 2–3 incomplete threads on the tapered lead.
3
The tap rotates clockwise to cut a right-hand thread.
4
Individual fragments exit at the top, onto the workpiece surface.
5
A few fragments fall below the tip and exit through the bottom of the hole.
6
Feed 1.5 mm/rev, equal to the pitch of the M34x1.5 thread.
M34x1.5 INOX machine tap – HSSE tool for stainless steel
In this range, the manufacturer offers the M34x1.5 INOX machine tap with optimized cutting geometry for metric fine threads with a pitch of 1.5 mm. The tool meets DIN 374 requirements and provides the 6H thread tolerance class required for series production of mechanical and precision components. HSSE steel construction with 5% added cobalt ensures a hardness of 66 HRC and resistance to temperatures up to 650°C in the cutting zone. Form C with straight flutes provides versatile use in through and blind holes in stainless steels.
Advantages of the general-purpose M34x1.5 tap
- Compatibility with ER40 holders collets and synchronized tapping chucks for CNC machining centers with automatic tool change
- Durability increased by the addition of cobalt in HSSE steel extends cutting edge life by 40-60% compared with standard HSS taps
- Material versatility covering austenitic stainless steels 304 and 316, structural steels up to 800 MPa and nonferrous metals such as aluminum and brass
- Precision to tolerance class 6H meeting the requirements of series production of mechanical and pneumatic components with tight fit tolerances
- Conforms to DIN 374 for fine threads ensures standardized shank dimensions and interchangeability with tools from European manufacturers
- M34x1.5 HSSE machine tap with form C ensures proper chip evacuation in through holes and blind holes without the risk of jamming
The M34x1.5 general-purpose machine tap is used in steel structures, hydraulic power systems, and the production of industrial automation components. The M34x1.5 machine tap for through holes and blind holes is compatible with automatic tool change systems. The tap drill diameter for the M34x1.5 thread is 32.5 mm.
Cutting data for the M34x1.5 HSSE INOX general-purpose machine tap
| Material | Cutting speed Vc [m/min] | Spindle speed n [rpm] | Feed f [mm/min] |
|---|---|---|---|
| PSteel | 5-20 | 47-187 | 70-280 |
| MStainless steel / INOX | 5-10 | 47-94 | 70-141 |
| KCast iron | 5-15 | 47-140 | 70-210 |
| NAluminum | 10-25 | 94-234 | 141-351 |
Thread preparation M34x1.5
1 Spot drilling
NC spotting drill 90°
2 Drilling
Ø 32.5 mm
3 Tapping
M34x1.5
✓ Done!
Tolerance 6H
Standard: DIN 374 | Chamfer: C (straight) | Application: general-purpose (through and blind holes)
Tolerance 6H — metric thread tolerance classes
| Class | Accuracy | Application | Status |
|---|---|---|---|
| 4H / 4g | High | Precision connections, hydraulics | — |
| 6H / 6g | Standard | Machine building, general-purpose | SELECTED |
| 7H / 8g | Low | Large clearance, easy assembly | — |
6H = internal thread (nut, hole) | 6g = external thread (screw)
Frequently asked questions
The M34x1.5 HSSE tap with form C and straight flutes is versatile – it is suitable for both through and blind holes. The design ensures proper chip evacuation in both types of holes.
The M34x1.5 HSSE tap cuts internal threads to tolerance class 6H. The 6H designation defines the permissible deviations of the thread pitch and minor diameters – the digit 6 indicates the width of the tolerance zone (medium), while the letter H indicates the position of the zone at the zero line. The 6H tolerance ensures a proper fit with screws of tolerance class 6g.
When tapping stainless steels, an EP emulsion at a minimum concentration of 8% or tapping oil is recommended for cooling. Cooling extends tool life by a factor of 2-3 and improves the thread surface finish.
Product accessories
Hand Tap M34X1.5 DIN 2181/2 6H HSS
Reference: 0000006463 In stock < 10 items
€81.58
€100.34 brutto
Metal drill bit 32.5 NWKc HSS DIN 345 Baildon
Reference: 0409 In stock > 10 items
€44.74
€55.03 brutto
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Machine Tap M34x1.5 DIN 374 C HSSE Podgląd zdjęć produktu
01 / 01
Powiększenie 100%
Użyj strzałek, aby zmieniać zdjęcia. Powiększaj przyciskami albo gestem szczypania. Zamknij galerię klawiszem Escape.
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.