Polski 
- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Machine tap M5X0.5 DIN 374 C HSSE
0000007133
Thread size: M5x0,575 sizes of this tap
M3x0,35M3,5x0,35M4x0,5M5x0,5M6x0,75M8x0,75M8x1M10x0,5M10x0,75M10x1M10x1,25M11x1M12x1M12x1,25M12x1,5M14x1M14x1,25M14x1,5M15x1M15x1,5M16x0,75M16x1M16x1,5M16x1,75M17x0,75M17x1M18x1M18x1,25M18x1,5M18x2M19x1M20x1M20x1,25M20x1,5M20x2M22x1M22x1,5M22x2M23x1,25M24x1M24x1,5M24x2M25x1M25x1,5M25x2M27x1M27x1,5M27x2M28x1M28x1,5M28x2M30x1M30x1,5M30x2M32x1,5M32x2M33x1,5M33x2M34x1,5M35x1,5M36x1,5M36x2M36x3M38x1,5M39x1M39x1,5M40x1,5M42x2M48x1,5M48x2M48x3M50x1,5M52x1,5M52x3M56x3
€10.36 tax inc.
Net price: €8.42
Description
Material HSSE
Thread size M5x0.5
ChamferC (2–3) threads
Standard DIN 374
Technical data for the M5x0.5 HSSE INOX general-purpose machine tap
| Technical Data | |
|---|---|
| Nominal Diameter d1 | M5x0.5 |
| Thread Pitch P | 0.5 mm |
| Overall Length l1 | 70 mm |
| Flute Length l2 | 14 mm |
| Shank Diameter d2 | 3.5 mm |
| Square Drive Size a | 2.7 mm |
| Tap Drill Diameter | 4.5 mm |
| Chamfer | C (2÷3) P |
| Thread tolerance | 6H |
Where chips remain in a straight-flute tap
The flute holds the chips until the tap is reversed out
The straight flute runs parallel to the tap axis. There is no helix to carry chips upward. The chamfer cutting edges are not ground at an angle, so they do not push chips downward. Short chips break into fragments and remain in the flute, next to the cutting edges that produced them. They leave the hole only when the tap is backed out. The M5x0.5 tap has a reduced shank to DIN 374: diameter 3.5 mm, square size 2.7 mm.
1
Straight flute – chips remain in the flute, next to the cutting edges that produced them.
2
Chamfer C: 2–3 incomplete threads on the tapered lead.
3
The tap rotates clockwise to cut a right-hand thread.
4
Individual fragments exit at the top, onto the workpiece surface.
5
A few fragments fall below the tip and exit through the bottom of the hole.
6
Feed 0.5 mm/rev, equal to the pitch of the M5x0.5 thread.
M5x0.5 INOX machine tap – HSSE tool for stainless steel
The M5x0.5 INOX machine tap is designed for precision tapping of holes with a diameter of 5 mm and a fine pitch of 0.5 mm in stainless and structural steels. HSSE high-speed steel construction with 5% added cobalt ensures a hardness of 66 HRC and long cutting edge life even when machining difficult-to-machine materials. Form C with straight flutes provides versatile use in through and blind holes. The 6H tolerance in accordance with DIN 374 confirms high manufacturing quality. The M5x0.5 HSSE machine tap is intended for departments engaged in series production of precision components.
Key features of the M5x0.5 tap for through and blind holes
- Fine pitch of 0.5 mm provides the maximum number of threads per unit length at small diameters, increasing sealing performance and connection load capacity
- Compliance with DIN 374 for fine threads confirms quality and ensures standardized shank dimensions compatible with European holders
- Durability increased by the addition of 5% cobalt allows operation at temperatures up to 650°C without loss of cutting edge performance
- Material versatility covering 304 and 316 austenitic stainless steels, structural steels up to 800 MPa, and nonferrous metals
- Compatibility with ER11 holders and tapping heads for CNC machining centers with synchronous tapping and automatic tool changing
- M5x0.5 general-purpose machine tap with form C allows through and blind holes to be tapped with a single tool without the risk of jamming
The M5x0.5 HSSE machine tap is used in electronics and precision engineering requiring metric fine threads. It performs well in optical component manufacturing. The tap drill diameter for the M5x0.5 thread is 4.5 mm.
Cutting data for the M5x0.5 HSSE INOX general-purpose machine tap
| Material | Cutting speed Vc [m/min] | Spindle speed n [rpm] | Feed f [mm/min] |
|---|---|---|---|
| PSteel | 5-20 | 318-1273 | 159-636 |
| MStainless steel / INOX | 5-10 | 318-637 | 159-318 |
| KCast iron | 5-15 | 318-955 | 159-478 |
| NAluminum | 10-25 | 637-1592 | 318-796 |
Thread preparation M5x0.5
1 Spot drilling
NC spotting drill 90°
2 Drilling
Ø 4.5 mm
3 Tapping
M5x0.5
✓ Done!
Tolerance 6H
Standard: DIN 374 | Chamfer: C (straight) | Application: general-purpose (through and blind holes)
Tolerance 6H — metric thread tolerance classes
| Class | Accuracy | Application | Status |
|---|---|---|---|
| 4H / 4g | High | Precision connections, hydraulics | — |
| 6H / 6g | Standard | Machine building, general-purpose | SELECTED |
| 7H / 8g | Low | Large clearance, easy assembly | — |
6H = internal thread (nut, hole) | 6g = external thread (screw)
Frequently asked questions
With proper cooling and lubrication, the M5x0.5 HSSE tap cuts 400-600 threads in structural steel or 250-350 threads in stainless steel. Dry operation reduces tool life by 40-50%.
Yes, the M5x0.5 HSSE tap with 5% cobalt is designed for austenitic stainless steels 304 and 316. The addition of cobalt increases heat resistance in the cutting zone to 650°C.
An HSSE tap contains 5% cobalt, which increases hardness from 64 to 66 HRC and heat resistance to 650°C. HSSE is suitable for stainless steels, while HSS is suitable only for structural steels up to 800 MPa.
Product accessories
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.