- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
navigate_next
navigate_next
navigate_next
Machine tap M48X1.5 DIN 374 C HSSE
Narex Zdanice spol. s r.o. Narex Zdanice spol. s r.o.
10859
Thread size: M48x1,575 sizes of this tap
M3x0,35M3,5x0,35M4x0,5M5x0,5M6x0,75M8x0,75M8x1M10x0,5M10x0,75M10x1M10x1,25M11x1M12x1M12x1,25M12x1,5M14x1M14x1,25M14x1,5M15x1M15x1,5M16x0,75M16x1M16x1,5M16x1,75M17x0,75M17x1M18x1M18x1,25M18x1,5M18x2M19x1M20x1M20x1,25M20x1,5M20x2M22x1M22x1,5M22x2M23x1,25M24x1M24x1,5M24x2M25x1M25x1,5M25x2M27x1M27x1,5M27x2M28x1M28x1,5M28x2M30x1M30x1,5M30x2M32x1,5M32x2M33x1,5M33x2M34x1,5M35x1,5M36x1,5M36x2M36x3M38x1,5M39x1M39x1,5M40x1,5M42x2M48x1,5M48x2M48x3M50x1,5M52x1,5M52x3M56x3
€142.42 tax inc.
Net price: €115.79
Instant Shipping
W magazynie: 2 pcs.
Description
Material HSSE
Thread size M48x1.5
ChamferC (2–3) threads
Standard DIN 374
Technical data for the M48x1.5 HSSE INOX general-purpose machine tap
| Technical Data | |
|---|---|
| Nominal Diameter d1 | M48x1.5 |
| Thread Pitch P | 1.5 mm |
| Overall Length l1 | 190 mm |
| Flute Length l2 | 30 mm |
| Shank Diameter d2 | 36 mm |
| Square Drive Size a | 29 mm |
| Tap Drill Diameter | 46.5 mm |
| Chamfer | C (2÷3) P |
| Thread tolerance | 6H |
Where chips remain in a straight-flute tap
The flute holds the chips until the tap is reversed out
The straight flute runs parallel to the tap axis. There is no helix to carry chips upward. The chamfer cutting edges are not ground at an angle, so they do not push chips downward. Short chips break into fragments and remain in the flute, next to the cutting edges that produced them. They leave the hole only when the tap is backed out. The M48x1.5 tap has a reduced shank to DIN 374: diameter 36 mm, square size 29 mm.
1
Straight flute – chips remain in the flute, next to the cutting edges that produced them.
2
Chamfer C: 2–3 incomplete threads on the tapered lead.
3
The tap rotates clockwise to cut a right-hand thread.
4
Individual fragments exit at the top, onto the workpiece surface.
5
A few fragments fall below the tip and exit through the bottom of the hole.
6
Feed 1.5 mm/rev, equal to the pitch of the M48x1.5 thread.
M48x1.5 INOX machine tap – HSSE tool for stainless steel
In this range, the manufacturer offers the M48x1.5 INOX machine tap with optimized cutting geometry for metric fine threads with a pitch of 1.5 mm. The tool meets DIN 374 requirements and provides the 6H thread tolerance class required for series production of mechanical and precision components. HSSE steel construction with 5% added cobalt ensures a hardness of 66 HRC and resistance to temperatures up to 650°C in the cutting zone. Form C with straight flutes provides versatile use in through and blind holes in stainless steels.
Advantages of the general-purpose M48x1.5 tap
- Fine pitch of 1.5 mm provides the maximum number of threads per unit length, increasing the sealing performance and load capacity of the joint in hydraulic components
- Durability increased by the addition of cobalt in HSSE steel extends cutting edge life by 40-60% compared with standard HSS taps
- Material versatility covering austenitic stainless steels 304 and 316, structural steels up to 800 MPa and nonferrous metals such as aluminum and brass
- Precision to tolerance class 6H meeting the requirements of series production of mechanical and pneumatic components with tight fit tolerances
- Conforms to DIN 374 for fine threads ensures standardized shank dimensions and interchangeability with tools from European manufacturers
- M48x1.5 HSSE machine tap with form C ensures proper chip evacuation in through holes and blind holes without the risk of jamming
The general-purpose M48x1.5 machine tap is used in steel structures, hydraulic power systems, and the manufacture of industrial automation components. The M48x1.5 machine tap for through and blind holes is compatible with ER40 collet chucks. The tap drill diameter for the M48x1.5 thread is 46.5 mm.
Cutting data for the M48x1.5 HSSE INOX general-purpose machine tap
| Material | Cutting speed Vc [m/min] | Spindle speed n [rpm] | Feed f [mm/min] |
|---|---|---|---|
| PSteel | 5-20 | 33-133 | 50-200 |
| MStainless steel / INOX | 5-10 | 33-66 | 50-99 |
| KCast iron | 5-15 | 33-99 | 50-148 |
| NAluminum | 10-25 | 66-166 | 99-249 |
Thread preparation M48x1.5
1 Spot drilling
NC spotting drill 90°
2 Drilling
Ø 46.5 mm
3 Tapping
M48x1.5
✓ Done!
Tolerance 6H
Standard: DIN 374 | Chamfer: C (straight) | Application: general-purpose (through and blind holes)
Tolerance 6H — metric thread tolerance classes
| Class | Accuracy | Application | Status |
|---|---|---|---|
| 4H / 4g | High | Precision connections, hydraulics | — |
| 6H / 6g | Standard | Machine building, general-purpose | SELECTED |
| 7H / 8g | Low | Large clearance, easy assembly | — |
6H = internal thread (nut, hole) | 6g = external thread (screw)
Frequently asked questions
The M48x1.5 HSSE tap is suitable for austenitic stainless steels 304 and 316, structural steels up to 800 MPa, ductile cast iron, and aluminum and brass alloys. It is not recommended for hardened steels above 45 HRC.
The nominal tap drill diameter for the M48x1.5 thread is 46.5 mm. The hole tolerance range should be 46.4–46.6 mm. A hole at the lower tolerance limit produces a fuller thread profile, while one at the upper limit reduces tapping torque.
The M48x1.5 tap works with ER40 holders and tapping chucks with axial compensation. Synchronized heads with automatic tool change capability are recommended for CNC machines.
Product accessories
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Machine tap M48X1.5 DIN 374 C HSSE Podgląd zdjęć produktu
01 / 01
Powiększenie 100%
Użyj strzałek, aby zmieniać zdjęcia. Powiększaj przyciskami albo gestem szczypania. Zamknij galerię klawiszem Escape.
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.