- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Machine Threader M30x2 DIN 374 C HSSE
0000007158
Thread size: M30x275 sizes of this tap
M3x0,35M3,5x0,35M4x0,5M5x0,5M6x0,75M8x0,75M8x1M10x0,5M10x0,75M10x1M10x1,25M11x1M12x1M12x1,25M12x1,5M14x1M14x1,25M14x1,5M15x1M15x1,5M16x0,75M16x1M16x1,5M16x1,75M17x0,75M17x1M18x1M18x1,25M18x1,5M18x2M19x1M20x1M20x1,25M20x1,5M20x2M22x1M22x1,5M22x2M23x1,25M24x1M24x1,5M24x2M25x1M25x1,5M25x2M27x1M27x1,5M27x2M28x1M28x1,5M28x2M30x1M30x1,5M30x2M32x1,5M32x2M33x1,5M33x2M34x1,5M35x1,5M36x1,5M36x2M36x3M38x1,5M39x1M39x1,5M40x1,5M42x2M48x1,5M48x2M48x3M50x1,5M52x1,5M52x3M56x3
€62.79 tax inc.
Net price: €51.05
Description
Material HSSE
Thread size M30x2
ChamferC (2–3) threads
Standard DIN 374
Technical data for the M30x2 HSSE INOX general-purpose machine tap
| Technical Data | |
|---|---|
| Nominal Diameter d1 | M30x2 |
| Thread Pitch P | 2 mm |
| Overall Length l1 | 150 mm |
| Flute Length l2 | 27 mm |
| Shank Diameter d2 | 22 mm |
| Square Drive Size a | 18 mm |
| Tap Drill Diameter | 28 mm |
| Chamfer | C (2÷3) P |
| Thread tolerance | 6H |
Where chips remain in a straight-flute tap
The flute holds the chips until the tap is reversed out
The straight flute runs parallel to the tap axis. There is no helix to carry chips upward. The chamfer cutting edges are not ground at an angle, so they do not push chips downward. Short chips break into fragments and remain in the flute, next to the cutting edges that produced them. They leave the hole only when the tap is backed out. The M30x2 tap has a reduced shank to DIN 374: diameter 22 mm, square size 18 mm.
1
Straight flute – chips remain in the flute, next to the cutting edges that produced them.
2
Chamfer C: 2–3 incomplete threads on the tapered lead.
3
The tap rotates clockwise to cut a right-hand thread.
4
Individual fragments exit at the top, onto the workpiece surface.
5
A few fragments fall below the tip and exit through the bottom of the hole.
6
Feed 2 mm/rev, equal to the pitch of the M30x2 thread.
M30x2 INOX machine tap – for through and blind holes
The M30x2 INOX machine tap is designed for precision tapping of holes with a diameter of 30 mm and a fine pitch of 2 mm in stainless and structural steels. Its HSSE high-speed steel construction with 5% cobalt guarantees a hardness of 66 HRC and long cutting edge life, even when machining difficult-to-machine materials. Form C with straight flutes provides versatile use in through and blind holes. The 6H tolerance to DIN 374 confirms high manufacturing quality. The M30x2 HSSE machine tap is intended for departments engaged in series production of hydraulic components.
Key features of the M30x2 general-purpose HSSE tap
- Manufacturing precision to 6H tolerance ensures dimensional repeatability and full thread interchangeability in series production of mechanical and hydraulic components
- Compliance with DIN 374 for fine threads confirms quality and ensures standardized shank dimensions compatible with European holders
- Durability increased by the addition of 5% cobalt allows operation at temperatures up to 650°C without loss of cutting edge performance
- Material versatility covering austenitic stainless steels 304 and 316, structural steels up to 800 MPa, gray and ductile cast iron, and aluminum alloys
- Compatibility with ER40 holders and tapping heads for CNC machining centers with synchronous tapping and automatic tool changing
- M30x2 machine tap for through and blind holes with form C allows both hole types to be tapped with a single tool without the risk of jamming
The M30x2 general-purpose machine tap is used in steel structures and industrial hydraulics requiring durable threaded connections. It is well suited for manufacturing fitting components. The tap drill diameter for the M30x2 thread is 28 mm.
Cutting data for the M30x2 HSSE INOX general-purpose machine tap
| Material | Cutting speed Vc [m/min] | Spindle speed n [rpm] | Feed f [mm/min] |
|---|---|---|---|
| PSteel | 5-20 | 53-212 | 106-424 |
| MStainless steel / INOX | 5-10 | 53-106 | 106-212 |
| KCast iron | 5-15 | 53-159 | 106-318 |
| NAluminum | 10-25 | 106-265 | 212-530 |
Thread preparation M30x2
1 Spot drilling
NC spotting drill 90°
2 Drilling
Ø 28 mm
3 Tapping
M30x2
✓ Done!
Tolerance 6H
Standard: DIN 374 | Chamfer: C (straight) | Application: general-purpose (through and blind holes)
Tolerance 6H — metric thread tolerance classes
| Class | Accuracy | Application | Status |
|---|---|---|---|
| 4H / 4g | High | Precision connections, hydraulics | — |
| 6H / 6g | Standard | Machine building, general-purpose | SELECTED |
| 7H / 8g | Low | Large clearance, easy assembly | — |
6H = internal thread (nut, hole) | 6g = external thread (screw)
Frequently asked questions
With proper cooling and lubrication, the M30x2 HSSE tap cuts 400-600 threads in structural steel or 250-350 threads in stainless steel. Dry operation reduces tool life by 40-50%.
Yes, the M30x2 HSSE tap with 5% cobalt is designed for austenitic stainless steels 304 and 316. The addition of cobalt increases heat resistance in the cutting zone to 650°C.
An HSSE tap contains 5% cobalt, which increases hardness from 64 to 66 HRC and heat resistance to 650°C. HSSE is suitable for stainless steels, while HSS is suitable only for structural steels up to 800 MPa.
Product accessories
Machine tap M30x2 DIN 374 B HSSE Narex
Reference: 0000007348 In stock < 10 items
€55.26
€67.97 brutto
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.