Polski 
- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Machine tap M36x3 DIN 374 C HSSE
10747
Thread size: M36x375 sizes of this tap
M3x0,35M3,5x0,35M4x0,5M5x0,5M6x0,75M8x0,75M8x1M10x0,5M10x0,75M10x1M10x1,25M11x1M12x1M12x1,25M12x1,5M14x1M14x1,25M14x1,5M15x1M15x1,5M16x0,75M16x1M16x1,5M16x1,75M17x0,75M17x1M18x1M18x1,25M18x1,5M18x2M19x1M20x1M20x1,25M20x1,5M20x2M22x1M22x1,5M22x2M23x1,25M24x1M24x1,5M24x2M25x1M25x1,5M25x2M27x1M27x1,5M27x2M28x1M28x1,5M28x2M30x1M30x1,5M30x2M32x1,5M32x2M33x1,5M33x2M34x1,5M35x1,5M36x1,5M36x2M36x3M38x1,5M39x1M39x1,5M40x1,5M42x2M48x1,5M48x2M48x3M50x1,5M52x1,5M52x3M56x3
€106.82 tax inc.
Net price: €86.84
Description
Material HSSE
Thread size M36x3
ChamferC (2–3) threads
Standard DIN 374
Technical data for the M36x3 HSSE INOX general-purpose machine tap
| Technical Data | |
|---|---|
| Nominal Diameter d1 | M36x3 |
| Thread Pitch P | 3 mm |
| Overall Length l1 | 200 mm |
| Flute Length l2 | 36 mm |
| Shank Diameter d2 | 28 mm |
| Square Drive Size a | 22 mm |
| Tap Drill Diameter | 33 mm |
| Chamfer | C (2÷3) P |
| Thread tolerance | 6H |
Where chips remain in a straight-flute tap
The flute holds the chips until the tap is reversed out
The straight flute runs parallel to the tap axis. There is no helix to carry chips upward. The chamfer cutting edges are not ground at an angle, so they do not push chips downward. Short chips break into fragments and remain in the flute, next to the cutting edges that produced them. They leave the hole only when the tap is backed out. The M36x3 tap has a reduced shank to DIN 374: diameter 28 mm, square size 22 mm.
1
Straight flute – chips remain in the flute, next to the cutting edges that produced them.
2
Chamfer C: 2–3 incomplete threads on the tapered lead.
3
The tap rotates clockwise to cut a right-hand thread.
4
Individual fragments exit at the top, onto the workpiece surface.
5
A few fragments fall below the tip and exit through the bottom of the hole.
6
Feed 3 mm/rev, equal to the pitch of the M36x3 thread.
M36x3 INOX machine tap – HSSE tool for stainless steel
The M36x3 INOX machine tap is a professional tool for cutting M36 internal threads with a fine pitch of 3 mm in stainless and structural steels. Its HSSE high-speed steel construction with 5% cobalt provides a hardness of 66 HRC and high resistance to cutting zone temperatures up to 650°C. Form C with straight flutes allows tapping of both through holes and blind holes without changing tools. The 6H tolerance in accordance with DIN 374 guarantees dimensional repeatability. The M36x3 general-purpose machine tap is designed for toolrooms and CNC machining center operators.
Key benefits of the M36x3 general-purpose tap
- Pitch 3 mm provides an optimum balance between connection load capacity and assembly speed in industrial applications requiring frequent disassembly
- Durability and heat resistance thanks to HSSE steel with 5% cobalt, which maintains its cutting properties at temperatures up to 650°C in the contact zone
- Precision to tolerance class 6H guarantees the dimensional accuracy required in the production of hydraulic power components and high-quality industrial valves and fittings
- Compatibility with ER40 holders and tapping chucks with axial compensation for synchronous tapping on CNC and conventional machines
- Designed for stainless steels austenitic grades 304 and 316 and ferritic grades, which require tools with increased heat and abrasion resistance
- M36x3 HSSE machine tap with form C evacuates chips properly in through holes and blind holes without the risk of thread damage
The M36x3 machine tap for through holes and blind holes is used in the production of industrial valves and fittings and hydraulic power components. Cooling with an EP emulsion at a minimum concentration of 8% extends tool life. The tap drill diameter for the M36x3 thread is 33 mm.
Cutting data for the M36x3 HSSE INOX general-purpose machine tap
| Material | Cutting speed Vc [m/min] | Spindle speed n [rpm] | Feed f [mm/min] |
|---|---|---|---|
| PSteel | 5-20 | 44-177 | 132-531 |
| MStainless steel / INOX | 5-10 | 44-88 | 132-264 |
| KCast iron | 5-15 | 44-133 | 132-399 |
| NAluminum | 10-25 | 88-221 | 264-663 |
Thread preparation M36x3
1 Spot drilling
NC spotting drill 90°
2 Drilling
Ø 33 mm
3 Tapping
M36x3
✓ Done!
Tolerance 6H
Standard: DIN 374 | Chamfer: C (straight) | Application: general-purpose (through and blind holes)
Tolerance 6H — metric thread tolerance classes
| Class | Accuracy | Application | Status |
|---|---|---|---|
| 4H / 4g | High | Precision connections, hydraulics | — |
| 6H / 6g | Standard | Machine building, general-purpose | SELECTED |
| 7H / 8g | Low | Large clearance, easy assembly | — |
6H = internal thread (nut, hole) | 6g = external thread (screw)
Frequently asked questions
The M36x3 HSSE tap with form C and straight flutes is versatile – it is suitable for both through and blind holes. The design ensures proper chip evacuation in both types of holes.
The M36x3 HSSE tap cuts internal threads to tolerance class 6H. The 6H designation defines the permissible deviations of the thread pitch and minor diameters – the digit 6 indicates the width of the tolerance zone (medium), while the letter H indicates the position of the zone at the zero line. The 6H tolerance ensures a proper fit with screws of tolerance class 6g.
When tapping stainless steels, an EP emulsion at a minimum concentration of 8% or tapping oil is recommended for cooling. Cooling extends tool life by a factor of 2-3 and improves the thread surface finish.
Product accessories
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Viewed products
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.