- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Machine tap M35x1.5 DIN 374 C HSSE
0000008364
Thread size: M35x1,575 sizes of this tap
M3x0,35M3,5x0,35M4x0,5M5x0,5M6x0,75M8x0,75M8x1M10x0,5M10x0,75M10x1M10x1,25M11x1M12x1M12x1,25M12x1,5M14x1M14x1,25M14x1,5M15x1M15x1,5M16x0,75M16x1M16x1,5M16x1,75M17x0,75M17x1M18x1M18x1,25M18x1,5M18x2M19x1M20x1M20x1,25M20x1,5M20x2M22x1M22x1,5M22x2M23x1,25M24x1M24x1,5M24x2M25x1M25x1,5M25x2M27x1M27x1,5M27x2M28x1M28x1,5M28x2M30x1M30x1,5M30x2M32x1,5M32x2M33x1,5M33x2M34x1,5M35x1,5M36x1,5M36x2M36x3M38x1,5M39x1M39x1,5M40x1,5M42x2M48x1,5M48x2M48x3M50x1,5M52x1,5M52x3M56x3
€95.49 tax inc.
Net price: €77.63
Description
Material HSSE
Thread size M35x1.5
ChamferC (2–3) threads
Standard DIN 374
Technical data for the M35x1.5 HSSE INOX general-purpose machine tap
| Technical Data | |
|---|---|
| Nominal Diameter d1 | M35x1.5 |
| Thread Pitch P | 1.5 mm |
| Overall Length l1 | 170 mm |
| Flute Length l2 | 30 mm |
| Shank Diameter d2 | 28 mm |
| Square Drive Size a | 22 mm |
| Tap Drill Diameter | 33.5 mm |
| Chamfer | C (2÷3) P |
| Thread tolerance | 6H |
Where chips remain in a straight-flute tap
The flute holds the chips until the tap is reversed out
The straight flute runs parallel to the tap axis. There is no helix to carry chips upward. The chamfer cutting edges are not ground at an angle, so they do not push chips downward. Short chips break into fragments and remain in the flute, next to the cutting edges that produced them. They leave the hole only when the tap is backed out. The M35x1.5 tap has a reduced shank to DIN 374: diameter 28 mm, square size 22 mm.
1
Straight flute – chips remain in the flute, next to the cutting edges that produced them.
2
Chamfer C: 2–3 incomplete threads on the tapered lead.
3
The tap rotates clockwise to cut a right-hand thread.
4
Individual fragments exit at the top, onto the workpiece surface.
5
A few fragments fall below the tip and exit through the bottom of the hole.
6
Feed 1.5 mm/rev, equal to the pitch of the M35x1.5 thread.
M35x1.5 INOX machine tap – general-purpose HSSE tool for CNC machining
The M35x1.5 INOX machine tap is a professional tool for cutting M35 internal threads with a fine pitch of 1.5 mm in stainless and structural steels. Its HSSE high-speed steel construction with 5% cobalt provides a hardness of 66 HRC and high resistance to cutting zone temperatures up to 650°C. Form C with straight flutes allows tapping of both through holes and blind holes without changing tools. The 6H tolerance in accordance with DIN 374 guarantees dimensional repeatability. The M35x1.5 general-purpose machine tap is designed for toolrooms and CNC machining center operators.
Key advantages of the M35x1.5 tap for through holes and blind holes
- Durability and heat resistance thanks to HSSE steel with 5% cobalt, which retains its cutting properties at temperatures up to 650°C in the contact zone with the workpiece material
- Compliance with DIN 374 for metric fine threads confirms standardized dimensions and full compatibility with European toolholding systems
- Precision to tolerance class 6H guarantees the dimensional accuracy required in the production of hydraulic power components and high-quality industrial valves and fittings
- Compatibility with ER40 holders and tapping chucks with axial compensation for synchronous tapping on CNC and conventional machines
- Designed for stainless steels austenitic grades 304 and 316 and ferritic grades, which require tools with increased heat and abrasion resistance
- M35x1.5 HSSE machine tap with form C evacuates chips properly in through holes and blind holes without the risk of thread damage
The M35x1.5 machine tap for through holes and blind holes is used in the production of industrial valves and fittings and hydraulic power components. Cooling with an EP emulsion at a minimum concentration of 8% extends tool life. The tap drill diameter for the M35x1.5 thread is 33.5 mm.
Cutting data for the M35x1.5 HSSE INOX general-purpose machine tap
| Material | Cutting speed Vc [m/min] | Spindle speed n [rpm] | Feed f [mm/min] |
|---|---|---|---|
| PSteel | 5-20 | 45-182 | 68-273 |
| MStainless steel / INOX | 5-10 | 45-91 | 68-136 |
| KCast iron | 5-15 | 45-136 | 68-204 |
| NAluminum | 10-25 | 91-227 | 136-340 |
Thread preparation M35x1.5
1 Spot drilling
NC spotting drill 90°
2 Drilling
Ø 33.5 mm
3 Tapping
M35x1.5
✓ Done!
Tolerance 6H
Standard: DIN 374 | Chamfer: C (straight) | Application: general-purpose (through and blind holes)
Tolerance 6H — metric thread tolerance classes
| Class | Accuracy | Application | Status |
|---|---|---|---|
| 4H / 4g | High | Precision connections, hydraulics | — |
| 6H / 6g | Standard | Machine building, general-purpose | SELECTED |
| 7H / 8g | Low | Large clearance, easy assembly | — |
6H = internal thread (nut, hole) | 6g = external thread (screw)
Frequently asked questions
With proper cooling and lubrication, the M35x1.5 HSSE tap cuts 400-600 threads in structural steel or 250-350 threads in stainless steel. Dry operation reduces tool life by 40-50%.
Yes, the M35x1.5 HSSE tap with 5% cobalt is designed for austenitic stainless steels 304 and 316. The addition of cobalt increases heat resistance in the cutting zone to 650°C.
An HSSE tap contains 5% cobalt, which increases hardness from 64 to 66 HRC and heat resistance to 650°C. HSSE is suitable for stainless steels, while HSS is suitable only for structural steels up to 800 MPa.
Product accessories
Machine tap M35X1.5 DIN 374/35 C SE
Reference: 0000006437 In stock < 10 items
€93.42
€114.91 brutto
Hand tap M35X1.5 DIN 2181/2 6H HSS Varel
Reference: 0000006465 In stock > 10 items
€76.32
€93.87 brutto
Metal drill bit 33.5 NWKc HSS DIN 345 Baildon
Reference: 0411 In stock > 10 items
€44.74
€55.03 brutto
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.