- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Description
DIAMETER Ø9.5 mm
MORSE TAPER MT1
OVERALL LENGTH 162 mm
FLUTE LENGTH 81 mm
Technical specifications of the Ø9.5 mm drill bit
Twist drill with Morse taper shank
| TECHNICAL DATA | |
|---|---|
| Diameter | Ø9.5 NWKc HSSE |
| Standard | DIN 345 |
| Drill type | NWKc — twist drill with taper shank |
| Material | HSSE (cobalt high-speed steel) |
| Overall length l1 | 162 mm |
| Flute length l2 | 81 mm |
| Morse taper | MT1 |
| Point angle | 118° |
| Diameter tolerance | h8 |
| Cutting direction | Right-hand |
Ø9.5 mm HSSE twist drill – MT1 Morse taper
Product description and key benefits
The Ø9.5 mm NWKc metal drill bit is based on DIN 345, which defines both the MT1 taper geometry and the proportions of the flute length to the overall tool length. This standardization ensures full interchangeability — a drill bit from one manufacturer can replace one from another without spindle adjustment or sleeve replacement. With a flute length of 81 mm, the Ø9.5 Morse taper drill bit can drill through holes in typical steel sections used in workshop production.
Key benefits of the Ø9.5 mm metal drill bit
- 5% cobalt in the HSS matrix — raises the tempering temperature to 650°C — 50°C higher than standard HSS
- Direct mounting in an MT1 spindle — eliminates the chuck as a source of runout — particularly important when drilling stainless steels, where runout reduces surface quality
- Drilling austenitic steels — the HSSE cutting edge handles work hardening in 304/316/321 steels
- h8 diameter tolerance — repeatable hole size even in difficult-to-machine materials
- Conforms to DIN 345 — dimensions identical to HSS — a replacement for use in existing machining cells
- Repeated resharpening — HSSE steel retains its properties after the cutting edge is reground on a tool grinder
The Ø9.5 mm Morse taper drill is selected for repair and assembly work on pillar drilling machines. The tool allows fast drilling of through and blind holes in steels with tensile strengths up to 900 N/mm². H12 tolerance at Ø9.500–Ø9.650 mm provides dimensional accuracy sufficient for most bolted connections.
Morse tapers – dimensions to DIN 228
Dimension table for all Morse tapers MT0–MT6
| Taper | Diameter D [mm] | Length [mm] |
|---|---|---|
| MT0 | 9.045 | 49.8 |
| MT1 | 12.065 | 53.5 |
| MT2 | 17.780 | 64.0 |
| MT3 | 23.825 | 80.5 |
| MT4 | 31.267 | 117.5 |
| MT5 | 44.399 | 149.5 |
| MT6 | 63.348 | 210.0 |
REDUCTION SLEEVES COMPATIBLE WITH THE Ø9.5 MM DRILL BIT:
| ✓ | MT1 → MT2 — for a spindle with an MT2 socket |
| ✓ | MT1 → MT3 — for a spindle with an MT3 socket |
| ✓ | MT1 drill drift — for removing the drill bit from the spindle |
Cutting data for the Ø9.5 mm drill bit according to ISO 513
Recommended machining conditions for a diameter of Ø9.5 mm
| ISO symbol | Workpiece material | Vc [m/min] | f [mm/rev] | n [rpm] | Vf [mm/min] |
|---|---|---|---|---|---|
| P Steel | Structural steel up to 900 N/mm² | 11÷20 | 0.08 | 369÷670 | 30÷54 |
| K Cast iron | Gray cast iron GG20–GG30 | 13÷16 | 0.08 | 436÷536 | 35÷43 |
| N Copper and Al alloys | Cu, CuZn, Al, and alloys | 25÷28 | 0.10÷0.12 | 838÷938 | 84÷113 |
Coolant for drilling steel
The Ø9.5 mm HSS drill requires cooling with a 5–8% emulsion when drilling structural steels. Dry drilling reduces cutting edge life by 50–70% and reduces hole surface quality. Minimum coolant flow: 2 l/min.
Material compatibility of the Ø9.5 mm drill bit
Range of workpiece materials and application limitations
✓ Structural steel (S235, S355) up to 900 N/mm²
✓ Gray and ductile cast iron (GG20, GGG40)
✓ Low-carbon and medium-alloy steel
▲ Stainless steel (Vc reduced by 30%, ample coolant)
▲ Aluminum and Al alloys (emulsion coolant required)
✗ Hardened steels above 45 HRC
Frequently asked questions about the Ø9.5 mm drill bit
In S235/S355 structural steels, spot drilling is not necessary — the 118° angle provides self-centering. Spot drilling with an NC 90° drill is recommended when drilling on milled surfaces, castings with machining allowance, or difficult-to-machine materials.
A cooling and lubricating emulsion at a concentration of 5–8% is recommended. For stainless steels, increase the concentration to 8–10%. Cast iron can be drilled dry with compressed air to remove chips.
The Ø9.5 mm NWKc drill bit with an MT1 taper mounts directly in the drill press spindle — the self-holding taper eliminates slipping under high cutting torque. A straight shank drill bit requires a drill chuck, which may not transmit the full torque during heavy use.
Product accessories
Reduction sleeve MK4 MK1 1751 PTPa DIN 228
Reference: 1179 In stock > 10 items
€15.79
€19.42 brutto
Reduction sleeve MK3 MK1 1751 PTPa DIN 228
Reference: 1184 In stock > 10 items
€11.84
€14.57 brutto
Reduction sleeve MK5 MK1 1751 PTPa DIN 228
Reference: 1185 In stock > 10 items
€22.37
€27.51 brutto
Reduction sleeve MK2 MK1 1751 PTPa DIN 228
Reference: 2586 In stock > 10 items
€9.21
€11.33 brutto
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
Viewed products
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.