- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Description
DIAMETER Ø10 mm
MORSE TAPER MT1
OVERALL LENGTH 168 mm
FLUTE LENGTH 87 mm
Technical specifications of the Ø10 mm drill bit
Twist drill with Morse taper shank
| TECHNICAL DATA | |
|---|---|
| Diameter | Ø10 NWKc HSSE |
| Standard | DIN 345 |
| Drill type | NWKc — twist drill with taper shank |
| Material | HSSE (cobalt high-speed steel) |
| Overall length l1 | 168 mm |
| Flute length l2 | 87 mm |
| Morse taper | MT1 |
| Point angle | 118° |
| Diameter tolerance | h8 |
| Cutting direction | Right-hand |
Ø10 mm HSSE twist drill – MT1 Morse taper
Product description and key benefits
The Ø10 mm NWKc twist drill is distinguished by its mounting method — the MT1 Morse taper eliminates the intermediate component between the tool and the spindle. This results in lower radial runout and improved repeatability of hole dimensions. The Ø10 Morse taper drill with a high-speed steel (HSS) cutting edge retains its working hardness up to 600°C, allowing drilling without the risk of tempering the cutting edge.
Key benefits of the Ø10 mm metal drill bit
- 5% cobalt in the HSS matrix — raises the tempering temperature to 650°C — 50°C higher than standard HSS
- Direct mounting in an MT1 spindle — eliminates the chuck as a source of runout — particularly important when drilling stainless steels, where runout reduces surface quality
- Drilling austenitic steels — the HSSE cutting edge handles work hardening in 304/316/321 steels
- h8 diameter tolerance — repeatable hole size even in difficult-to-machine materials
- Conforms to DIN 345 — dimensions identical to HSS — a replacement for use in existing machining cells
- Repeated resharpening — HSSE steel retains its properties after the cutting edge is reground on a tool grinder
The Ø10 Morse taper drill is suitable for series production of steel components, where repeatable hole dimensions determine assembly quality. With H12 tolerance at Ø10.000–Ø10.150 mm, holes require no additional machining for bolted connections. More precise fits are achieved with a finishing reamer.
Morse tapers – dimensions to DIN 228
Dimension table for all Morse tapers MT0–MT6
| Taper | Diameter D [mm] | Length [mm] |
|---|---|---|
| MT0 | 9.045 | 49.8 |
| MT1 | 12.065 | 53.5 |
| MT2 | 17.780 | 64.0 |
| MT3 | 23.825 | 80.5 |
| MT4 | 31.267 | 117.5 |
| MT5 | 44.399 | 149.5 |
| MT6 | 63.348 | 210.0 |
REDUCTION SLEEVES COMPATIBLE WITH THE Ø10 MM DRILL BIT:
| ✓ | MT1 → MT2 — for a spindle with an MT2 socket |
| ✓ | MT1 → MT3 — for a spindle with an MT3 socket |
| ✓ | MT1 drill drift — for removing the drill bit from the spindle |
Cutting data for the Ø10 mm drill bit according to ISO 513
Recommended machining conditions for a diameter of Ø10 mm
| ISO symbol | Workpiece material | Vc [m/min] | f [mm/rev] | n [rpm] | Vf [mm/min] |
|---|---|---|---|---|---|
| P Steel | Structural steel up to 900 N/mm² | 11÷20 | 0.08 | 350÷637 | 28÷51 |
| K Cast iron | Gray cast iron GG20–GG30 | 13÷16 | 0.08 | 414÷509 | 33÷41 |
| N Copper and Al alloys | Cu, CuZn, Al, and alloys | 25÷28 | 0.10÷0.12 | 796÷891 | 80÷107 |
Drill sharpening
Sharpen the Ø10 mm drill bit on a tool grinder, maintaining the 118° point angle and cutting edge symmetry. Asymmetric sharpening enlarges the hole diameter and loads the spindle unevenly. Each sharpening reduces the flute length by approximately 1–2 mm.
Material compatibility of the Ø10 mm drill bit
Range of workpiece materials and application limitations
✓ Structural steel (S235, S355) up to 900 N/mm²
✓ Gray and ductile cast iron (GG20, GGG40)
✓ Low-carbon and medium-alloy steel
▲ Stainless steel (Vc reduced by 30%, ample coolant)
▲ Aluminum and Al alloys (emulsion coolant required)
✗ Hardened steels above 45 HRC
Frequently asked questions about the Ø10 mm drill bit
A cooling and lubricating emulsion at a concentration of 5–8% is recommended. For stainless steels, increase the concentration to 8–10%. Cast iron can be drilled dry with compressed air to remove chips.
The Ø10 mm NWKc drill bit with an MT1 taper mounts directly in the drill press spindle — the self-holding taper eliminates slipping under high cutting torque. A straight shank drill bit requires a drill chuck, which may not transmit the full torque during heavy use.
Yes — using an MT1→MT2 reduction sleeve. The sleeve ensures proper seating of the taper in the larger spindle socket. Use a correctly sized drill drift for removal.
Product accessories
Reduction sleeve MK4 MK1 1751 PTPa DIN 228
Reference: 1179 In stock > 10 items
€15.79
€19.42 brutto
Reduction sleeve MK3 MK1 1751 PTPa DIN 228
Reference: 1184 In stock > 10 items
€11.84
€14.57 brutto
Reduction sleeve MK2 MK1 1751 PTPa DIN 228
Reference: 2586 In stock > 10 items
€9.21
€11.33 brutto
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.