- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Description
DIAMETER Ø28.5 mm
MORSE TAPER MT3
OVERALL LENGTH 296 mm
FLUTE LENGTH 175 mm
Technical specifications of the Ø28.5 mm drill bit
Twist drill with Morse taper shank
| TECHNICAL DATA | |
|---|---|
| Diameter | Ø28.5 NWKc HSSE |
| Standard | DIN 345 |
| Drill type | NWKc — twist drill with taper shank |
| Material | HSSE (cobalt high-speed steel) |
| Overall length l1 | 296 mm |
| Flute length l2 | 175 mm |
| Morse taper | MT3 |
| Point angle | 118° |
| Diameter tolerance | h8 |
| Cutting direction | Right-hand |
Ø28.5 mm HSSE twist drill – MT3 Morse taper
Product description and key benefits
The Ø28.5 mm NWKc twist drill with an MT3 taper is designed for use on shop-grade pillar and box-column drilling machines. At this diameter, the volume of chips generated per centimeter of depth requires an efficient evacuation system — type N helical flutes handle this task with proper emulsion cooling. With a flute length of 175 mm, the Ø28.5 Morse taper drill is sufficient for drilling in flanges, plates, and thick-walled sections.
Key benefits of the Ø28.5 mm metal drill bit
- Cobalt 5% — hardness up to 67 HRC — greater hardness than standard HSS (63–65 HRC) translates into longer service life between sharpenings
- MT3 Morse taper to DIN 345 — secure, self-holding mounting regardless of load level
- Cutting-edge stability in INOX steels — HSSE does not require as drastic a reduction in Vc as HSS when drilling acid-resistant steels
- Flute length 175 mm — allows drilling through standard structural component thicknesses
- Versatility — drilling structural steels, stainless steels, cast iron, and aluminum with one tool
- 118° angle — self-centering in most materials without spot drilling
The Ø28.5 mm Morse taper drill bit is used to manufacture infrastructure components — columns, supports, brackets, and load-bearing frames. In steel construction, hole diameters of 23–31 mm correspond to M22–M30 bolts. An H12 tolerance of Ø28.500–Ø28.710 mm is sufficient for through holes.
Morse tapers – dimensions to DIN 228
Dimension table for all Morse tapers MT0–MT6
| Taper | Diameter D [mm] | Length [mm] |
|---|---|---|
| MT0 | 9.045 | 49.8 |
| MT1 | 12.065 | 53.5 |
| MT2 | 17.780 | 64.0 |
| MT3 | 23.825 | 80.5 |
| MT4 | 31.267 | 117.5 |
| MT5 | 44.399 | 149.5 |
| MT6 | 63.348 | 210.0 |
REDUCTION SLEEVES COMPATIBLE WITH THE Ø28.5 MM DRILL BIT:
| ✓ | MT3 → MT4 — for a spindle with an MT4 socket |
| ✓ | MT3 → MT5 — for a spindle with an MT5 socket |
| ✓ | MT3 drill drift — for removing the drill bit from the spindle |
Cutting data for the Ø28.5 mm drill bit according to ISO 513
Recommended machining conditions for a diameter of Ø28.5 mm
| ISO symbol | Workpiece material | Vc [m/min] | f [mm/rev] | n [rpm] | Vf [mm/min] |
|---|---|---|---|---|---|
| P Steel | Structural steel up to 900 N/mm² | 11÷20 | 0.20 | 123÷223 | 25÷45 |
| K Cast iron | Gray cast iron GG20–GG30 | 13÷16 | 0.20 | 145÷179 | 29÷36 |
| N Copper and Al alloys | Cu, CuZn, Al, and alloys | 25÷28 | 0.25÷0.32 | 279÷313 | 70÷100 |
Machine tool requirements
The Ø28.5 mm drill requires a drilling machine with at least 1.5 kW of power and a rigid pillar or box-column construction. Bench drilling machines do not provide sufficient rigidity — resulting in runout, vibration, and accelerated cutting edge wear.
Material compatibility of the Ø28.5 mm drill bit
Range of workpiece materials and application limitations
✓ Structural steel (S235, S355) up to 900 N/mm²
✓ Gray and ductile cast iron (GG20, GGG40)
✓ Low-carbon and medium-alloy steel
▲ Stainless steel (Vc reduced by 30%, ample coolant)
▲ Aluminum and Al alloys (emulsion coolant required)
✗ Hardened steels above 45 HRC
Frequently asked questions about the Ø28.5 mm drill bit
Use peck drilling: retract the drill every 1–1.5×D, clear chips from the flutes, and cool with a 6–8% emulsion. Reduce the feed by 30–50% from the nominal value.
Spot drilling is not necessary on flat surfaces in structural steels. Spotting with a 90° NC spotting drill is recommended when drilling on inclined surfaces, castings with machining allowance, and flame-cut surfaces.
The HSS drill can handle stainless steel with Vc reduced by 40% and ample coolant. For regular INOX machining, an HSSE (cobalt) drill of the same diameter is recommended.
Product accessories
Reduction sleeve MK4 MK3 1751 PTPa DIN 228
Reference: 1180 In stock > 10 items
€18.42
€22.66 brutto
Reduction sleeve MK6 MK3 1751 PTPa DIN 228
Reference: 11965 In stock < 10 items
€36.84
€45.32 brutto
Reduction sleeve MK5 MK3 1751 PTPa DIN 228
Reference: 5702 In stock > 10 items
€26.32
€32.37 brutto
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.