Polski 
- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Description
Material HSSE
Thread size M36
ChamferC (2–3) threads
Standard DIN 376
Technical data for the M36 blind-hole tap
| Technical Data | |
|---|---|
| Nominal Diameter d1 | M36 |
| Thread Pitch P | 4 mm |
| Helix Angle | 35° |
| Overall Length l1 | 200 mm |
| Flute Length l2 | 40 mm |
| Length l3 | 72 mm |
| Shank Diameter d2 | 28 mm |
| Square Drive Size a | 22 mm |
| Tap Drill Diameter | 32 mm |
| Chamfer | C (2÷3) P |
| Thread tolerance | 6H |
How a spiral flute tap evacuates chips from a blind hole
The 35° flute works like a screw conveyor
The flutes of this tap follow a right-hand helix at an angle of 35° to the axis. The tap rotates clockwise and advances into the hole. Chips cut by the chamfer enter the flute, and the helix carries them upward like the screw in a meat grinder. The bottom of the hole stays clean, and the cutting edges do not encounter packed chips. The M36 x4 tap has a reduced shank according to DIN 376: diameter 28 mm, square size 22 mm.
1
The 35° spiral flute carries chips upward from the chamfer.
2
The stepped chip exits the hole and breaks into short pieces.
3
The tap rotates clockwise to cut a right-hand thread.
4
Chamfer C: 2–3 incomplete threads on the tapered lead.
5
Clearance below the tap tip – min. 2 thread pitches above the bottom.
6
Feed 4 mm/rev, equal to the pitch of the M36 x4 thread.
M36 spiral-flute machine tap – for blind holes
The M36 spiral flute machine tap is a professional tool for cutting large internal threads in blind holes up to 2.5D deep. Its 35° spiral flute design ensures effective backward chip evacuation, eliminating the risk of jamming during blind hole tapping. Made from HSSE steel with 5% cobalt, it guarantees a hardness of 65-67 HRC and thermal stability up to 650°C. The long shank in accordance with DIN 376 increases clamping rigidity in machine tool holders. The 6H tolerance ensures the dimensional repeatability required in industrial production.
Key advantages of the M36 spiral flute machine tap
- 35° spiral flute geometry directs chips backward during cutting, which is essential when tapping blind holes without the risk of damaging the hole bottom
- Durability enhanced by the addition of 5% cobalt allows operation at temperatures up to 650°C in the cutting zone without loss of the tool's mechanical properties
- Tolerance class 6H precision in accordance with DIN 376 guarantees full thread interchangeability and dimensional repeatability in series production
- Material versatility covering structural steels with a tensile strength up to 900 MPa, austenitic stainless steels, gray and ductile cast iron, and aluminum alloys
- Chamfer form C allows tapping close to the bottom of a blind hole with a minimal incomplete thread length of just 2-3 pitches
- Compatibility with ER40 holders and tapping chucks with axial compensation for CNC machining centers and automatic lathes
The M36 spiral flute tap is well suited to the production of machine housings and industrial gearboxes requiring large internal threads. The standard pitch of the M36 thread is 4 mm, with a tap drill diameter of 32 mm. The tool works with standard mineral oil-based tapping lubricants and coolant emulsions.
Cutting data for the M36 blind-hole machine tap
| Material | Cutting speed Vc [m/min] | Spindle speed n [rpm] | Feed f [mm/min] |
|---|---|---|---|
| PSteel | 5-20 | 44-177 | 176-708 |
| MStainless steel | 5-10 | 44-88 | 176-352 |
| KCast iron | 5-15 | 44-133 | 176-532 |
| NAluminum | 10-25 | 88-221 | 352-884 |
Thread preparation M36 in a blind hole
1 Spot drilling
NC spotting drill 90°
2 Drilling
Ø 32 mm
3 Tapping
M36
✓ Done!
Tolerance 6H
Standard: DIN 376 | Chamfer: C (spiral flute) | Application: blind holes
Tolerance 6H — metric thread tolerance classes
| Class | Accuracy | Application | Status |
|---|---|---|---|
| 4H / 4g | High | Precision connections, hydraulics | — |
| 6H / 6g | Standard | Machine building, general-purpose | SELECTED |
| 7H / 8g | Low | Large clearance, easy assembly | — |
6H = internal thread (nut, hole) | 6g = external thread (screw)
Frequently asked questions
The M36 HSSE spiral flute machine tap performs well in structural steels with a tensile strength up to 900 MPa, stainless steels, aluminum, brass, and gray cast iron. Size M36 is used in heavy industry and machine building.
For an M36x4 thread of tolerance class 6H, the recommended tap drill diameter is 32 mm. The hole tolerance range should be 32.0 to 32.35 mm. Exceeding the upper limit results in an incomplete thread profile.
Yes, cooling with an oil emulsion at a minimum concentration of 8% or with tapping oil is recommended and extends tool life by a factor of 2-3. Intensive cooling under pressure is required when machining stainless steels.
Product accessories
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.