Polski 
- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Machine tap M36x2 DIN 374 B HSSE
0000008174
Thread size: M36x261 sizes of this tap
M5x0,5M10x1M10x1,25M11x0,75M12x1M12x1,25M12x1,5M14x1M14x1,25M14x1,5M15x1M15x1,25M15x1,5M16x1M16x1,5M17x1M18x1M18x1,5M18x2M20x0,75M20x1M20x1,25M20x1,5M20x2M22x1,5M22x2M24x1M24x1,5M24x2M25x1M25x1,5M25x2M26x1,5M27x1,5M28x1,5M30x1,5M30x2M30x3M32x1M32x1,5M32x2M33x1,5M33x2M35x1,5M36x1,5M36x2M36x3M38x1,5M39x1,5M39x2M40x1,5M42x1,5M42x2M42x3M48x1,5M50x2M52x2M56x3M60x3M64x3M64x4
€101.96 tax inc.
Net price: €82.89
Description
Material HSSE
Thread size M36x2
ChamferB (3.5–5.5) threads
Standard DIN 374
Technical data for the M36x2 machine tap
| Technical Data | |
|---|---|
| Nominal Diameter d1 | M36x2 |
| Thread Pitch P | 2 mm |
| Overall Length l1 | 170 mm |
| Flute Length l2 | 30 mm |
| Shank Diameter d2 | 28 mm |
| Square Drive Size a | 22 mm |
| Tap Drill Diameter | 34 mm |
| Chamfer | B (3.5÷5.5) P |
| Thread tolerance | 6H |
How the type B through-hole chamfer pushes chips down the hole
Chips exit at the bottom instead of returning through the thread
The form B chamfer for through holes has a chip breaker at the tip of the tap – an angled cut in the cutting edges. The chip breaker directs the chip down the hole, ahead of the tap tip. The chip curls into a coil, breaks into short pieces and exits the hole on the other side of the workpiece. The threads already cut remain clean because the chip does not pass through them on its way up. The M36x2 tap has a reduced shank according to DIN 374: diameter 28 mm, square size 22 mm.
1
Straight flute – chips do not enter it; the flute carries lubricant to the cutting edges.
2
The chip breaker at the tip of the tap directs chips down the hole.
3
The tap rotates clockwise to cut a right-hand thread.
4
B chamfer: 3.5–5.5 incomplete threads on the entry taper.
5
The chips break into segments: individual pieces at the top of the hole, with progressively more farther down. They fall out below the workpiece.
6
Feed 2 mm/rev, equal to the pitch of the M36x2 thread.
M36x2 fine thread machine tap – HSSE for machine construction
The M36x2 machine tap for metric fine threads from the HSSE series is designed for cutting internal threads with a pitch of 2 mm in machine structures and components subject to dynamic loads. High-speed steel with 5% added cobalt guarantees a hardness of 65-67 HRC and long cutting-edge life even when machining difficult-to-machine materials. The M36x2 metric fine thread offers better sealing and greater strength than the M36x4 coarse thread while maintaining relatively fast assembly.
Key features of the M36x2 metric fine thread machine tap
- Fine thread with a 2 mm pitch offers twice the tensile strength of the M36x4 coarse thread while maintaining fast assembly
- Improved resistance to self-loosening thanks to a finer pitch and a larger helix angle compared with a coarse thread
- HSSE steel with 5% cobalt guarantees a hardness of 65-67 HRC and heat resistance up to 650°C, extending cutting edge life
- Tolerance 6H in accordance with DIN 374 ensures thread accuracy and full interchangeability with standard-grade fasteners
- Material versatility covering structural steels up to 800 MPa, alloy steels, gray cast iron and ductile iron
- The recommended hole diameter of 34 mm for the M36x2 metric fine thread ensures an optimal percentage of thread engagement
The M36x2 machine tap is used in heavy machinery manufacturing, steel structures and the power industry, where greater strength than a coarse thread provides is required. Form B with straight flutes directs chips forward. Cooling with an oil emulsion at a concentration of 8-10% is recommended.
| Material | Cutting speed Vc [m/min] | Spindle speed n [rpm] | Feed f [mm/min] |
|---|---|---|---|
| PSteel | 5-20 | 44-177 | 88-354 |
| MStainless steel | 5-10 | 44-88 | 88-176 |
| KCast iron | 5-15 | 44-133 | 88-266 |
| NAluminum | 10-25 | 88-221 | 176-442 |
Thread preparation M36x2 in a through hole
1 Spot drilling
NC spotting drill 90°
2 Drilling
Ø 34 mm
3 Tapping
M36x2
✓ Done!
Tolerance 6H
Standard: DIN 374 | Chamfer: B (straight) | Application: through holes
Tolerance 6H — metric thread tolerance classes
| Class | Accuracy | Application | Status |
|---|---|---|---|
| 4H / 4g | High | Precision connections, hydraulics | — |
| 6H / 6g | Standard | Machine building, general-purpose | SELECTED |
| 7H / 8g | Low | Large clearance, easy assembly | — |
6H = internal thread (nut, hole) | 6g = external thread (screw)
Frequently asked questions
The M36x2 fine thread provides approximately 100% higher tensile strength, better sealing, and greater resistance to self-loosening with a slightly longer assembly time.
The recommended tap drill diameter for the M36x2 metric fine thread is 34 mm. Precise hole machining ensures full thread engagement.
Yes, the M36x2 HSSE tap with 5% cobalt is suitable for machining 304/316 austenitic stainless steels. Flood cooling with an emulsion containing EP additives at a concentration of 8-10% is recommended.
Product accessories
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Viewed products
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.