- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Description
Cutting diameter DØ2 H7hole 2.000–2.010 mm
MaterialHSShigh-speed steel (HSS)
StandardDIN 206hand reamer
Number of cutting edgesZ = 6straight flutes
Technical data for the 2 H7 hand reamer
dimensions, standard, and shank specifications
| Technical data | |
|---|---|
| Cutting diameter D | Ø2 H7 · hole 2.000–2.010 mm |
| Hole tolerance zone | H7 (+0.010 / 0 mm) |
| Type | Fixed-size shank-type hand reamer |
| Dimensional standard | DIN 206 |
| Material | HSS (high-speed steel) |
| Flute length l | 32 mm |
| Shank length l₁ | 20 mm |
| Overall length L | 54 mm |
| Number of cutting edges Z | 6 (straight flutes) |
| Shank / drive | Straight shank with square drive (for a tap wrench) |
Hand reamer 2 H7 NRTh — characteristics
construction, operation, and applications
Hand reamer 2 H7 NRTh (DIN 206) is a tool for finishing Ø2 cylindrical holes. Operated by hand, it sizes a drilled hole to 2.000–2.010 mm within tolerance grade H7 — it removes only a thin layer, giving the hole an accurate size, correct roundness and low surface roughness.
The tool is made from high-grade Polish HSS high-speed steel, providing hard, durable cutting edges. The straight flutes accommodate 6 cutting edges; distributing the cut across this many edges improves hole roundness and dampens vibration compared with a two-edge drill. The tapered lead ensures concentricity, while the square drive on the straight shank fits into a tap wrench.
Reaming is classified as finishing, not roughing. A drilled hole falls within IT10–IT11, and the reamer tightens its tolerance to H7, while smoothing the hole wall. Remember that the tool follows the existing hole and will not correct a crooked hole — drill the initial hole perpendicular to the surface. A hand reamer has a longer tapered lead and more cutting edges than a machine reamer, making even cutting easier with manual feed. The tool facilitates fitting holes for plain bearing bushings, where tolerance grade H7 determines the correct fit and operation of the assembly.
H7 tolerance and Ø2 hole accuracy
final tolerance zone of the machined hole
Ø2 mm hole size by tolerance grade (ISO 286)
| Designation | Hole Ø range [mm] | Deviations [mm] | IT tolerance grade |
|---|---|---|---|
| 2 H6 | 2.000 – 2.006 | +0.006 / 0 | 6 µm |
| 2 H7 | 2.000 – 2.010 | +0.010 / 0 | 10 µm this product |
| 2 H8 | 2.000 – 2.014 | +0.014 / 0 | 14 µm |
| 2 H9 | 2.000 – 2.025 | +0.025 / 0 | 25 µm |
| 2 H11 | 2.000 – 2.060 | +0.060 / 0 | 60 µm |
Your reamer produces tolerance grade H7 — finished hole Ø2.000–2.010 mm; the value is stated directly, without conversion from tables. A narrower tolerance zone means a more accurate hole. The reamed surface is smooth — typically Ra 0.4–1.6 µm, significantly better than after drilling alone (approx. 1.6–3.2 µm).
Manual machining — how to ream Ø2 H7
tap wrench operation, allowance and predrilled hole
The reamer is operated by hand, with a tap wrench fitted over the square drive on the shank and turned with an even, steady motion in one direction. For Ø2 H7, leave a 0.1 mm allowance on diameter: in practice, drill Ø1.9 mm, then remove the remainder with the reamer. With small diameters, guide the tool gently without lateral pressure — the slender shank is easily overloaded. Apply plenty of cutting oil — generous lubrication reduces cutting resistance and produces a surface finish of Ra 0.4–1.6 µm, whereas drilling leaves approx. 1.6–3.2 µm.
▲Important: is a tool for manual machining — it is not intended for powered operation at high speeds. High-speed steel loses hardness above approx. 600 °C, so lubricate generously. Do not stop the reamer in the hole or reverse rotation — always withdraw it while continuing to rotate forward; withdrawing without rotation risks chip jamming, chipped cutting edges and a poorer hole finish.
Applications — workpiece materials
groups P1.2–P1.3 according to the material classification
✓Unalloyed and structural steel
✓Free-machining steel
✓Nonferrous metals — brass, bronze, copper
✓Light alloys and soft metals
▲Alloy steel — possible with generous lubrication and low speeds
✗Hardened steel and hardened stainless steel — beyond the capabilities of HSS
Frequently asked questions
It is suitable for unalloyed and free-machining steels, brass, bronze, copper and light alloys (P1.2–P1.3). When machining alloy steel, work slowly and lubricate generously. Hardened steel and hardened stainless steel are beyond the capabilities of an HSS tool.
H7 for Ø2 is 2.000–2.010 mm (+0.010 / 0 mm) — a narrower tolerance zone than H8 and H9, making the hole more accurate. A narrower tolerance means a tighter, more repeatable fit. The surface finish after reaming is Ra 0.4–1.6 µm.
Leave a 0.1 mm allowance on diameter. In practice, predrill with a Ø1.9 mm drill, then finish by hand reaming with generous cutting oil lubrication.
Product accessories
Set of metal drill bits 1-13 HSSE Inox DIN 338
Reference: 0000005480 In stock > 10 items
€50.00
€61.50 brutto
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.