• 98% satisfied customers
  • 72h delivery
  • 30 dni na zwrot
Hand reamer fi 8 H7 NRTh DIN 206 A HSS
search
  • Hand reamer fi 8 H7 NRTh DIN 206 A HSS
  • Hand reamer fi 8 H7 NRTh DIN 206 A HSS - nr. 1

Hand reamer 8 H7 NRTh DIN 206 A HSS

0618
€10.36 tax inc.

Net price: €8.42

Instant Shipping
W magazynie: 10-100 szt.
W magazynie: 10-100 szt.

Instant Shipping

Call and order: (44) 755-04-05

Description

Cutting diameter DØ8 H7hole 8.000–8.015 mm
MaterialHSShigh-speed steel (HSS)
StandardDIN 206hand reamer
Number of cutting edgesZ = 6straight flutes

Technical data for the 8 H7 hand reamer

dimensions, standard, and shank specifications

Technical data
Cutting diameter DØ8 H7 · hole 8.000–8.015 mm
Hole tolerance zoneH7 (+0.015 / 0 mm)
TypeFixed-size shank-type hand reamer
Dimensional standardDIN 206
MaterialHSS (high-speed steel)
Flute length l58 mm
Shank length l₁37 mm
Overall length L115 mm
Number of cutting edges Z6 (straight flutes)
Shank / driveStraight shank with square drive (for a tap wrench)
Hand reamer 8 H7 NRTh DIN 206 in HSS — shank-type finishing reamer for cylindrical holes with a square drive for a tap wrench

Hand reamer 8 H7 NRTh — characteristics

construction, operation, and applications

Shank-type, fixed-size hand reamer 8 H7 NRTh (DIN 206) finishes cylindrical holes of diameter Ø8. It sizes them to the tolerance zone H7 (8.000–8.015 mm), removing only a few hundredths of a millimeter on the diameter; the result is an accurate hole with good roundness and a smooth wall.

The tool is made of high-quality Polish-made high-speed steel (HSS). The cutting section has straight flutes and 6 cutting edges that distribute cutting resistance over more edges — this improves hole roundness and reduces vibration compared with a two-lip drill. The extended, slightly tapered lead facilitates self-centering in the pilot hole, while the straight shank with square drive allows the reamer to be driven with a tap wrench in a smooth, steady motion.

This is a machining operation for finishing operation, not roughing: drilling produces a hole of grade IT10–IT11, whereas the reamer brings it to H7 and smooths the surface. Remember that the reamer follows the existing hole and cannot correct its misalignment — hence the need for perpendicular, concentric pilot drilling. The hand version has a longer tapered lead and more cutting edges than the machine version, making it easier to control with manual feed. It is sometimes used for machining reduction sleeves, in which the bore must meet a narrow H7 tolerance zone.

H7 tolerance and Ø8 hole accuracy

final tolerance zone of the machined hole

Ø8 mm hole size by tolerance grade (ISO 286)

DesignationHole Ø range [mm]Deviations [mm]IT tolerance grade
8 H68.000 – 8.009+0.009 / 09 µm
8 H78.000 – 8.015+0.015 / 015 µm this product
8 H88.000 – 8.022+0.022 / 022 µm
8 H98.000 – 8.036+0.036 / 036 µm
8 H118.000 – 8.090+0.090 / 090 µm

Your reamer produces tolerance grade H7 — finished hole Ø8.000–8.015 mm; the value is stated directly, without conversion from tables. A narrower tolerance zone means a more accurate hole. The reamed surface is smooth — typically Ra 0.4–1.6 µm, significantly better than after drilling alone (approx. 1.6–3.2 µm).

Manual machining — how to ream Ø8 H7

tap wrench operation, allowance and predrilled hole

Drive is transmitted by a tap wrench fitted over the square drive of the shank; rotate the reamer smoothly in one direction with light, even pressure. For a Ø8 H7 hole, allow a 0.1–0.2 mm allowance on diameter and drill a pilot hole Ø7.8 mm, then hand-ream to the final size. Maintain moderate, even pressure and do not reverse rotation while cutting. Use generous lubrication — cutting oil reduces cutting resistance and produces a finish of Ra 0.4–1.6 µm, better than the approximately 1.6–3.2 µm obtained by drilling.

▲Important: is a tool for manual machining — it is not intended for powered operation at high speeds. High-speed steel loses hardness above approx. 600 °C, so lubricate generously. Do not stop the reamer in the hole or reverse rotation — always withdraw it while continuing to rotate forward; withdrawing without rotation risks chip jamming, chipped cutting edges and a poorer hole finish.

Applications — workpiece materials

groups P1.2–P1.3 according to the material classification

✓Unalloyed and structural steel
✓Free-machining steel
✓Nonferrous metals — brass, bronze, copper
✓Light alloys and soft metals
▲Alloy steel — possible with generous lubrication and low speeds
✗Hardened steel and hardened stainless steel — beyond the capabilities of HSS

Frequently asked questions

It performs best in unalloyed and free-machining steels, as well as nonferrous metals and light alloys (P1.2–P1.3). Machine alloy steel carefully with generous lubrication. Do not machine hardened steels or hardened stainless steels — these exceed the capabilities of HSS.

The H7 zone for Ø8 mm is +0.015 / 0 mm, so the finished hole falls within 8.000–8.015 mm. The reamed surface is smooth (Ra 0.4–1.6 µm) — considerably finer than after drilling alone (approximately 1.6–3.2 µm).

Drill a Ø7.8 mm pilot hole perpendicular to the surface, leaving a stock allowance of 0.1–0.2 mm on the diameter. Then hand-ream to the final size with steady rotation and generous lubrication.

Product accessories

Tap wrench No. 2

Reference: 3101 In stock > 10 items

€7.89

€9.71 brutto

Reviews

No customer reviews for the moment.

Add a review about the product

Hand reamer 8 H7 NRTh DIN 206 A HSS

Hand reamer 8 H7 NRTh DIN 206 A HSS

Shipping

All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE

Courier GLS Przelew24 / Prepayment 14,76 zł gross Delivery time 1 working day
Courier GLS Cash on delivery 17,26 zł gross Lead time 1 working day

This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.

More information