• 98% satisfied customers
  • 72h delivery
  • 30 dni na zwrot
Hand reamer fi 3.5 H7 NRTh DIN 206 HSS
search
  • Hand reamer fi 3.5 H7 NRTh DIN 206 HSS
  • Hand reamer fi 3.5 H7 NRTh DIN 206 HSS - nr. 1

Hand reamer 3.5 H7 NRTh DIN 206 HSS Fra

0000006758
€7.77 tax inc.

Net price: €6.32

Instant Shipping
W magazynie: +100 szt.
W magazynie: +100 szt.

Instant Shipping

Call and order: (44) 755-04-05

Description

Cutting diameter DØ3.5 H7hole 3.500–3.512 mm
MaterialHSShigh-speed steel (HSS)
StandardDIN 206hand reamer
Number of cutting edgesZ = 6straight flutes

Technical data for the 3.5 H7 hand reamer

dimensions, standard, and shank specifications

Technical data
Cutting diameter DØ3.5 H7 · hole 3.500–3.512 mm
Hole tolerance zoneH7 (+0.012 / 0 mm)
TypeFixed-size shank-type hand reamer
Dimensional standardDIN 206
MaterialHSS (high-speed steel, manufactured by FRA)
Flute length l35 mm
Shank length l₁26 mm
Overall length L71 mm
Number of cutting edges Z6 (straight flutes)
Shank / driveStraight shank with square drive (for a tap wrench)
Hand reamer 3.5 H7 NRTh DIN 206 in HSS — shank-type finishing reamer for cylindrical holes with a square drive for a tap wrench

Hand reamer 3.5 H7 NRTh — characteristics

construction, operation, and applications

Hand reamer 3.5 H7 NRTh conforming to DIN 206 is a shank-type finishing tool for cylindrical holes. After drilling, it brings a Ø3.5 hole to the precise tolerance grade H7 (3.500–3.512 mm) — it removes a small allowance around the entire circumference, improving the hole size, roundness and surface finish.

The tool body is made from HSS high-speed steel supplied by the Serbian company FRA. The cutting section has straight flutes and 6 cutting edges: more edges distribute cutting resistance more evenly, improving hole roundness and reducing vibration compared with a two-edge drill. The extended tapered lead centers the reamer in the hole, while the square drive on the shank transfers torque from the tap wrench.

Reaming is a finishing operation, not a roughing operation. After drilling, the hole falls within the broad IT10–IT11 tolerance range; the reamer tightens its tolerance to H7, while improving the hole wall finish. Bear in mind that the tool follows the existing hole and will not straighten a crooked hole — so the initial hole must be drilled perpendicular to the surface. Unlike the machine version, the hand version has an extended tapered lead and more cutting edges, promoting even cutting. It is well suited to finishing holes for pins and shafts, when a running fit or a light interference fit is required.

H7 tolerance and Ø3.5 hole accuracy

final tolerance zone of the machined hole

Ø3.5 mm hole size by tolerance grade (ISO 286)

DesignationHole Ø range [mm]Deviations [mm]IT tolerance grade
3.5 H63.500 – 3.508+0.008 / 08 µm
3.5 H73.500 – 3.512+0.012 / 012 µm this product
3.5 H83.500 – 3.518+0.018 / 018 µm
3.5 H93.500 – 3.530+0.030 / 030 µm
3.5 H113.500 – 3.575+0.075 / 075 µm

Your reamer produces tolerance grade H7 — finished hole Ø3.500–3.512 mm; the value is stated directly, without conversion from tables. A narrower tolerance zone means a more accurate hole. The reamed surface is smooth — typically Ra 0.4–1.6 µm, significantly better than after drilling alone (approx. 1.6–3.2 µm).

Manual machining — how to ream Ø3.5 H7

tap wrench operation, allowance and predrilled hole

The reamer engages with the tap wrench through the square drive on the shank — guide it by hand, steadily and in one direction, with moderate pressure. For Ø3.5 H7, leave a 0.1 mm allowance on diameter; predrill the hole with a drill of Ø3.4 mm, then finish with the reamer. With small diameters, guide the tool gently without lateral pressure — the slender shank is easily overloaded. Generous cutting oil lubrication is essential — it reduces cutting resistance and improves the surface finish to Ra 0.4–1.6 µm (approx. 1.6–3.2 µm after drilling).

▲Important: is a tool for manual machining — it is not intended for powered operation at high speeds. High-speed steel loses hardness above approx. 600 °C, so lubricate generously. Do not stop the reamer in the hole or reverse rotation — always withdraw it while continuing to rotate forward; withdrawing without rotation risks chip jamming, chipped cutting edges and a poorer hole finish.

Applications — workpiece materials

groups P1.2–P1.3 according to the material classification

✓Unalloyed and structural steel
✓Free-machining steel
✓Nonferrous metals — brass, bronze, copper
✓Light alloys and soft metals
▲Alloy steel — possible with generous lubrication and low speeds
✗Hardened steel and hardened stainless steel — beyond the capabilities of HSS

Frequently asked questions

Yes — nonferrous metals and light alloys (brass, bronze, copper, aluminum) are among the recommended materials in group P1.2–P1.3, alongside unalloyed and free-machining steels. The limitations are hardened steels and hardened stainless steels, for which HSS is too soft.

The hole size falls within 3.500–3.512 mm (H7, +0.012 / 0 mm), and roughness drops to Ra 0.4–1.6 µm. By comparison, drilling alone leaves approx. 1.6–3.2 µm and a much looser IT10–IT11 tolerance grade.

The optimum allowance is 0.1 mm on diameter. Predrill with a Ø3.4 mm drill; excessive allowance worsens the surface finish and loads the cutting edges, while too little will not remove drilling marks.

Product accessories

Tap wrench No. 1

Reference: 4926 In stock > 10 items

€3.68

€4.53 brutto

Reviews

No customer reviews for the moment.

Add a review about the product

Hand reamer 3.5 H7 NRTh DIN 206 HSS Fra

Hand reamer 3.5 H7 NRTh DIN 206 HSS Fra

Shipping

All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE

Courier GLS Przelew24 / Prepayment 14,76 zł gross Delivery time 1 working day
Courier GLS Cash on delivery 17,26 zł gross Lead time 1 working day

This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.

More information