• 98% satisfied customers
  • 72h delivery
  • 30 dni na zwrot
Hand reamer fi 4.5 H7 NRTh DIN 206 HSS
search
  • Hand reamer fi 4.5 H7 NRTh DIN 206 HSS
  • Hand reamer fi 4.5 H7 NRTh DIN 206 HSS - nr. 1

Hand reamer 4.5 H7 NRTh DIN 206 HSS

12856
€8.09 tax inc.

Net price: €6.58

Instant Shipping
W magazynie: 10-100 szt.
W magazynie: 10-100 szt.

Instant Shipping

Call and order: (44) 755-04-05

Description

Cutting diameter DØ4.5 H7hole 4.500–4.512 mm
MaterialHSShigh-speed steel (HSS)
StandardDIN 206hand reamer
Number of cutting edgesZ = 6straight flutes

Technical data for the 4.5 H7 hand reamer

dimensions, standard, and shank specifications

Technical data
Cutting diameter DØ4.5 H7 · hole 4.500–4.512 mm
Hole tolerance zoneH7 (+0.012 / 0 mm)
TypeFixed-size shank-type hand reamer
Dimensional standardDIN 206
MaterialHSS (high-speed steel)
Flute length l41 mm
Shank length l₁30 mm
Overall length L81 mm
Number of cutting edges Z6 (straight flutes)
Shank / driveStraight shank with square drive (for a tap wrench)
Hand reamer 4.5 H7 NRTh DIN 206 in HSS — shank-type finishing reamer for cylindrical holes with a square drive for a tap wrench

Hand reamer 4.5 H7 NRTh — characteristics

construction, operation, and applications

Hand reamer 4.5 H7 NRTh (DIN 206) is a shank-type finishing reamer designed for cylindrical holes. Its purpose is to bring a drilled Ø4.5 hole into the tight tolerance zone H7 (4.500–4.512 mm): it removes a minimal stock allowance while improving roundness and smoothing the hole wall.

The reamer is made of high-quality Polish-made high-speed steel (HSS). The cutting section features 6 straight cutting edges — the greater number of edges distributes cutting resistance, resulting in better hole roundness and less vibration than with a two-lip drill. The gently tapered lead provides self-centering, and the square drive on the straight shank allows operation with a tap wrench and a steady feed.

Reaming serves the purpose of finishing, not roughing. A drilled hole has a loose IT10–IT11 tolerance, and the reamer brings it to grade H7, while also reducing surface roughness. Remember that the tool follows the path of the hole and will not correct a crooked hole — the initial hole must be drilled perpendicular to the surface. A hand reamer differs from a machine reamer in having a longer lead taper and more cutting edges, providing more even cutting. It is useful when installing spring pins and press-fit components for which a precise tolerance zone is essential.

H7 tolerance and Ø4.5 hole accuracy

final tolerance zone of the machined hole

Ø4.5 mm hole size by tolerance grade (ISO 286)

DesignationHole Ø range [mm]Deviations [mm]IT tolerance grade
4.5 H64.500 – 4.508+0.008 / 08 µm
4.5 H74.500 – 4.512+0.012 / 012 µm this product
4.5 H84.500 – 4.518+0.018 / 018 µm
4.5 H94.500 – 4.530+0.030 / 030 µm
4.5 H114.500 – 4.575+0.075 / 075 µm

Your reamer produces tolerance grade H7 — finished hole Ø4.500–4.512 mm; the value is stated directly, without conversion from tables. A narrower tolerance zone means a more accurate hole. The reamed surface is smooth — typically Ra 0.4–1.6 µm, significantly better than after drilling alone (approx. 1.6–3.2 µm).

Manual machining — how to ream Ø4.5 H7

tap wrench operation, allowance and predrilled hole

The reamer is fitted to a tap wrench using the square drive of the shank and operated by hand — with smooth, steady rotation in one direction. For reaming to Ø4.5 H7, leave a 0.1–0.2 mm allowance on diameter, by drilling a pilot hole Ø4.3 mm and finishing it with a reamer. With a small diameter, guide the tool gently without lateral pressure — the slender shank is easily overloaded. Remember to lubricate generously: cutting oil reduces resistance and improves the wall finish to Ra 0.4–1.6 µm (approximately 1.6–3.2 µm after drilling alone).

▲Important: is a tool for manual machining — it is not intended for powered operation at high speeds. High-speed steel loses hardness above approx. 600 °C, so lubricate generously. Do not stop the reamer in the hole or reverse rotation — always withdraw it while continuing to rotate forward; withdrawing without rotation risks chip jamming, chipped cutting edges and a poorer hole finish.

Applications — workpiece materials

groups P1.2–P1.3 according to the material classification

✓Unalloyed and structural steel
✓Free-machining steel
✓Nonferrous metals — brass, bronze, copper
✓Light alloys and soft metals
▲Alloy steel — possible with generous lubrication and low speeds
✗Hardened steel and hardened stainless steel — beyond the capabilities of HSS

Frequently asked questions

It covers unalloyed and free-machining steels, nonferrous metals (brass, bronze, copper), and light alloys — group P1.2–P1.3. Alloy steel can be machined at low rotational speed with lubrication. Hardened steels and hardened stainless steels are excluded.

The hole falls within 4.500–4.512 mm, corresponding to the H7 tolerance zone (+0.012 / 0 mm). The narrower the zone, the more accurate the hole; roughness decreases to Ra 0.4–1.6 µm compared with approximately 1.6–3.2 µm after drilling.

Approximately Ø4.3 mm, corresponding to a stock allowance of 0.1–0.2 mm on the diameter. After drilling, ream the hole by hand — remember to drill perpendicular to the surface, as the reamer cannot correct misalignment.

Product accessories

Tap wrench No. 1,5

Reference: 0000008974 In stock > 10 items

€4.47

€5.50 brutto

Reviews

No customer reviews for the moment.

Add a review about the product

Hand reamer 4.5 H7 NRTh DIN 206 HSS

Hand reamer 4.5 H7 NRTh DIN 206 HSS

Shipping

All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE

Courier GLS Przelew24 / Prepayment 14,76 zł gross Delivery time 1 working day
Courier GLS Cash on delivery 17,26 zł gross Lead time 1 working day

This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.

More information