• 98% satisfied customers
  • 72h delivery
  • 30 dni na zwrot
Hand reamer fi 47 H7 NRTh DIN 206 HSS
search
  • Hand reamer fi 47 H7 NRTh DIN 206 HSS
  • Hand reamer fi 47 H7 NRTh DIN 206 HSS - nr. 1

Hand reamer 47 H7 NRTh DIN 206 HSS

712380
€123.00 tax inc.

Net price: €100.00

Instant Shipping
W magazynie: 3 pcs.
W magazynie: 3 pcs.

Instant Shipping

Call and order: (44) 755-04-05

Description

Cutting diameter DØ47 H7hole 47.000–47.025 mm
MaterialHSShigh-speed steel (HSS)
StandardDIN 206hand reamer
Number of cutting edgesZ = 12straight flutes

Technical data for the 47 H7 hand reamer

dimensions, standard, and shank specifications

Technical data
Cutting diameter DØ47 H7 · hole 47.000–47.025 mm
Hole tolerance zoneH7 (+0.025 / 0 mm)
TypeFixed-size shank-type hand reamer
Dimensional standardDIN 206
MaterialHSS (high-speed steel)
Flute length l163 mm
Shank length l₁120 mm
Overall length L326 mm
Number of cutting edges Z12 (straight flutes)
Shank / driveStraight shank with square drive (for a tap wrench)
Hand reamer 47 H7 NRTh DIN 206 in HSS — shank-type finishing reamer for cylindrical holes with a square drive for a tap wrench

Hand reamer 47 H7 NRTh — characteristics

construction, operation, and applications

This hand reamer 47 H7 NRTh (DIN 206) is a shank-type finishing tool for cylindrical holes. It is used for precision sizing of a Ø47 hole: it removes a few hundredths of a millimeter on diameter and brings the hole into the tolerance zone H7 (47.000–47.025 mm), while smoothing the hole wall and improving roundness.

The reamer is made of high-quality Polish-made high-speed steel (HSS). Its 12 straight cutting edges distribute cutting resistance over more edges — the key to good hole roundness and operation without the vibration typical of a drill. The slightly tapered lead facilitates self-centering, while the straight shank with square drive allows the tool to be operated with a tap wrench.

Reaming is a finishing operation, not a roughing operation. Drilling alone leaves the hole in a loose tolerance grade (around IT10–IT11), and only the reamer brings it to H7 and smooths the wall. Remember that the tool follows the existing hole and cannot correct its misalignment — drill the pilot hole perpendicularly and concentrically. Unlike the machine version, a hand reamer has a longer tapered lead and more cutting edges, facilitating even cutting under the less rigid conditions of hand operation. A typical application is sizing holes for hinge pins and joints where assembly clearance must be minimal.

H7 tolerance and Ø47 hole accuracy

final tolerance zone of the machined hole

Ø47 mm hole size by tolerance grade (ISO 286)

DesignationHole Ø range [mm]Deviations [mm]IT tolerance grade
47 H647.000 – 47.016+0.016 / 016 µm
47 H747.000 – 47.025+0.025 / 025 µm this product
47 H847.000 – 47.039+0.039 / 039 µm
47 H947.000 – 47.062+0.062 / 062 µm
47 H1147.000 – 47.160+0.160 / 0160 µm

Your reamer produces tolerance grade H7 — finished hole Ø47.000–47.025 mm; the value is stated directly, without conversion from tables. A narrower tolerance zone means a more accurate hole. The reamed surface is smooth — typically Ra 0.4–1.6 µm, significantly better than after drilling alone (approx. 1.6–3.2 µm).

Manual machining — how to ream Ø47 H7

tap wrench operation, allowance and predrilled hole

The tool is driven by a tap wrench fitted over the square drive on the shank; turn the tool evenly in one direction, applying light, continuous pressure. For Ø47 H7, allow a 0.4–0.5 mm allowance on diameter — predrilled hole Ø46.5 mm, and finish with a hand reamer. The larger diameter requires a sturdy tap wrench and more torque — guide the tool steadily. Lubricate generously: cutting oil reduces resistance and allows surface roughness down to Ra 0.4–1.6 µm compared with approx. 1.6–3.2 µm after drilling alone.

▲Important: is a tool for manual machining — it is not intended for powered operation at high speeds. High-speed steel loses hardness above approx. 600 °C, so lubricate generously. Do not stop the reamer in the hole or reverse rotation — always withdraw it while continuing to rotate forward; withdrawing without rotation risks chip jamming, chipped cutting edges and a poorer hole finish.

Applications — workpiece materials

groups P1.2–P1.3 according to the material classification

✓Unalloyed and structural steel
✓Free-machining steel
✓Nonferrous metals — brass, bronze, copper
✓Light alloys and soft metals
▲Alloy steel — possible with generous lubrication and low speeds
✗Hardened steel and hardened stainless steel — beyond the capabilities of HSS

Frequently asked questions

Metals in group P1.2–P1.3: unalloyed and free-machining steel, nonferrous metals (brass, bronze, copper) and light alloys. HSS cutting edges handle these materials well; do not use the tool on hardened steel or hardened stainless steel.

The upper deviation is +0.025 / 0 mm — the hole is no smaller than 47.000 mm and no larger than 47.025 mm. Reaming also provides a smooth surface of Ra 0.4–1.6 µm, better than drilling.

Use a Ø46.5 mm drill bit — this leaves a diametral reaming allowance of 0.4–0.5 mm. Remove the remaining stock with a hand reamer, guiding it steadily and lubricating generously.

Product accessories

Reviews

No customer reviews for the moment.

Add a review about the product

Hand reamer 47 H7 NRTh DIN 206 HSS

Hand reamer 47 H7 NRTh DIN 206 HSS

Shipping

All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE

Courier GLS Przelew24 / Prepayment 14,76 zł gross Delivery time 1 working day
Courier GLS Cash on delivery 17,26 zł gross Lead time 1 working day

This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.

More information