• 98% satisfied customers
  • 72h delivery
  • 30 dni na zwrot
Hand reamer fi 36 H7 NRTh DIN 206 HSS
search
  • Hand reamer fi 36 H7 NRTh DIN 206 HSS
  • Hand reamer fi 36 H7 NRTh DIN 206 HSS - nr. 1

Hand reamer 36 H7 NRTh DIN 206 HSS

1245
€74.45 tax inc.

Net price: €60.53

Instant Shipping
W magazynie: 10-100 szt.
W magazynie: 10-100 szt.

Instant Shipping

Call and order: (44) 755-04-05

Description

Cutting diameter DØ36 H7hole 36.000–36.025 mm
MaterialHSShigh-speed steel (HSS)
StandardDIN 206hand reamer
Number of cutting edgesZ = 12straight flutes

Technical data for the 36 H7 hand reamer

dimensions, standard, and shank specifications

Technical data
Cutting diameter DØ36 H7 · hole 36.000–36.025 mm
Hole tolerance zoneH7 (+0.025 / 0 mm)
TypeFixed-size shank-type hand reamer
Dimensional standardDIN 206
MaterialHSS (high-speed steel)
Flute length l142 mm
Shank length l₁104 mm
Overall length L284 mm
Number of cutting edges Z12 (straight flutes)
Shank / driveStraight shank with square drive (for a tap wrench)
Hand reamer 36 H7 NRTh DIN 206 in HSS — shank-type finishing reamer for cylindrical holes with a square drive for a tap wrench

Hand reamer 36 H7 NRTh — characteristics

construction, operation, and applications

Shank-type hand reamer 36 H7 NRTh to DIN 206 is used to finish cylindrical Ø36 holes. Its purpose is to bring the hole into the tight tolerance zone H7 (36.000–36.025 mm): it removes a stock allowance of a few hundredths of a millimeter while improving roundness and wall smoothness.

The tool is made of high-quality Polish-made high-speed steel (HSS), giving the cutting edges high hardness and wear resistance — they retain their size for a long time. The cutting section has 12 straight cutting edges that distribute cutting resistance over multiple edges, resulting in a rounder hole and smoother operation than with a drill. The tapered lead centers the reamer, and the straight shank with a square drive connects to a tap wrench.

The operation is intended for finishing operation, not roughing. Drilling leaves a hole of grade IT10–IT11, while the reamer brings it to H7 and improves the wall finish. Bear in mind that a reamer follows the hole and will not correct a crooked hole, so the initial hole should be perpendicular to the surface and on axis. Unlike a machine reamer, the hand model has a longer lead taper and more cutting edges — making even cutting easier. It is used when assembling bearing shells, for which an accurate, smooth hole determines correct seating.

H7 tolerance and Ø36 hole accuracy

final tolerance zone of the machined hole

Ø36 mm hole size by tolerance grade (ISO 286)

DesignationHole Ø range [mm]Deviations [mm]IT tolerance grade
36 H636.000 – 36.016+0.016 / 016 µm
36 H736.000 – 36.025+0.025 / 025 µm this product
36 H836.000 – 36.039+0.039 / 039 µm
36 H936.000 – 36.062+0.062 / 062 µm
36 H1136.000 – 36.160+0.160 / 0160 µm

Your reamer produces tolerance grade H7 — finished hole Ø36.000–36.025 mm; the value is stated directly, without conversion from tables. A narrower tolerance zone means a more accurate hole. The reamed surface is smooth — typically Ra 0.4–1.6 µm, significantly better than after drilling alone (approx. 1.6–3.2 µm).

Manual machining — how to ream Ø36 H7

tap wrench operation, allowance and predrilled hole

The tap wrench fits over the square drive of the straight shank; guide the reamer by hand with a steady motion in one direction, without jerking. Before machining to Ø36 H7, leave a 0.4–0.5 mm allowance on diameter and drill a pilot hole Ø35.5 mm, and finish with a reamer. The larger diameter requires a sturdy tap wrench and more torque — guide the tool steadily. Use generous lubrication — cutting oil reduces resistance and improves the surface finish to Ra 0.4–1.6 µm (drilling produces approximately 1.6–3.2 µm).

▲Important: is a tool for manual machining — it is not intended for powered operation at high speeds. High-speed steel loses hardness above approx. 600 °C, so lubricate generously. Do not stop the reamer in the hole or reverse rotation — always withdraw it while continuing to rotate forward; withdrawing without rotation risks chip jamming, chipped cutting edges and a poorer hole finish.

Applications — workpiece materials

groups P1.2–P1.3 according to the material classification

✓Unalloyed and structural steel
✓Free-machining steel
✓Nonferrous metals — brass, bronze, copper
✓Light alloys and soft metals
▲Alloy steel — possible with generous lubrication and low speeds
✗Hardened steel and hardened stainless steel — beyond the capabilities of HSS

Frequently asked questions

For ordinary unalloyed steels, free-machining steels, nonferrous metals, and light alloys — yes. Avoid hardened steels and hardened stainless steels, as they exceed the capabilities of HSS. The intended materials are in group P1.2–P1.3.

The H7 zone, or +0.025 / 0 mm — the finished hole measures 36.000–36.025 mm. Grade H7 is a typical precision fit; after reaming, roughness is within Ra 0.4–1.6 µm.

Drill it with a Ø35.5 mm drill (stock allowance of 0.4–0.5 mm on the diameter), perpendicular to the surface. Ream slowly in one direction with generous lubrication — this ensures the H7 tolerance zone and low roughness.

Product accessories

Reviews

No customer reviews for the moment.

Add a review about the product

Hand reamer 36 H7 NRTh DIN 206 HSS

Hand reamer 36 H7 NRTh DIN 206 HSS

Shipping

All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE

Courier GLS Przelew24 / Prepayment 14,76 zł gross Delivery time 1 working day
Courier GLS Cash on delivery 17,26 zł gross Lead time 1 working day

This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.

More information