Description
dimensions, standard, and shank specifications
| Technical data | |
|---|---|
| Cutting diameter D | Ø29 H7 · hole 29.000–29.021 mm |
| Hole tolerance zone | H7 (+0.021 / 0 mm) |
| Type | Fixed-size shank-type hand reamer |
| Dimensional standard | DIN 206 |
| Material | HSS (high-speed steel) |
| Flute length l | 124 mm |
| Shank length l₁ | 88 mm |
| Overall length L | 247 mm |
| Number of cutting edges Z | 10 (straight flutes) |
| Shank / drive | Straight shank with square drive (for a tap wrench) |

construction, operation, and applications
The reamer is made of high-quality Polish-made high-speed steel (HSS). A set of 10 straight cutting edges distributes cutting forces over multiple edges, maintaining hole roundness and avoiding the vibration typical of a two-lip drill. The tapered lead guides the tool concentrically into the pilot hole, while the straight shank ending in a square drive engages with a tap wrench.
This is a machining operation for finishing operation, not roughing. Drilling alone produces a hole of grade IT10–IT11; the reamer is intended to tighten its tolerance to H7 and smooth the wall. Note: the reamer follows the hole and will not correct a crooked hole, so drill the initial hole perpendicular to the surface and on axis. Unlike a machine reamer, the hand version has a longer lead taper and more cutting edges, making it easier to guide under less rigid working conditions. It is sometimes used for machining reduction sleeves, in which the bore must meet a narrow H7 tolerance zone.
final tolerance zone of the machined hole
| Designation | Hole Ø range [mm] | Deviations [mm] | IT tolerance grade |
|---|---|---|---|
| 29 H6 | 29.000 – 29.013 | +0.013 / 0 | 13 µm |
| 29 H7 | 29.000 – 29.021 | +0.021 / 0 | 21 µm this product |
| 29 H8 | 29.000 – 29.033 | +0.033 / 0 | 33 µm |
| 29 H9 | 29.000 – 29.052 | +0.052 / 0 | 52 µm |
| 29 H11 | 29.000 – 29.130 | +0.130 / 0 | 130 µm |
Your reamer produces tolerance grade H7 — finished hole Ø29.000–29.021 mm; the value is stated directly, without conversion from tables. A narrower tolerance zone means a more accurate hole. The reamed surface is smooth — typically Ra 0.4–1.6 µm, significantly better than after drilling alone (approx. 1.6–3.2 µm).
tap wrench operation, allowance and predrilled hole
The reamer is secured in a tap wrench by the square drive of the shank and operated by hand — with steady rotation in one direction and light, even pressure. For reaming to Ø29 H7, leave a 0.3–0.4 mm allowance on diameter: drill the pilot hole with a drill of Ø28.6 mm, then ream to the finished size. The larger diameter requires a sturdy tap wrench and more torque — guide the tool steadily. Lubricate generously with cutting oil — it reduces resistance and improves the surface finish, allowing you to achieve Ra 0.4–1.6 µm (drilling alone leaves approximately 1.6–3.2 µm).
groups P1.2–P1.3 according to the material classification
Unalloyed and free-machining steel, nonferrous metals (brass, bronze, copper), and light alloys — materials in group P1.2–P1.3. The HSS cutting edges provide durability during hand operation, but the tool is not intended for hardened steel or hardened stainless steel.
It means the hole is produced within 29.000–29.021 mm — upper deviation +0.021 / 0 mm, without falling below the nominal size. Reaming also produces a smooth wall with Ra 0.4–1.6 µm.
Yes — drill Ø28.6 mm, leaving a stock allowance of 0.3–0.4 mm on the diameter. The reamer is a finishing tool and removes only a thin layer; it cannot replace drilling from solid.
Reference: 0396 In stock > 10 items
€40.78 brutto
No customer reviews for the moment.
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Użyj strzałek, aby zmieniać zdjęcia. Powiększaj przyciskami albo gestem szczypania. Zamknij galerię klawiszem Escape.
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.