• 98% satisfied customers
  • 72h delivery
  • 30 dni na zwrot
Hand reamer fi 48 H7 NRTh DIN 206 HSS B
search
  • Hand reamer fi 48 H7 NRTh DIN 206 HSS B
  • Hand reamer fi 48 H7 NRTh DIN 206 HSS B - nr. 1

Hand reamer 48 H7 NRTh DIN 206 HSS B

1249
€132.71 tax inc.

Net price: €107.89

Instant Shipping
W magazynie: 8 pcs.
W magazynie: 8 pcs.

Instant Shipping

Call and order: (44) 755-04-05

Description

Cutting diameter DØ48 H7hole 48.000–48.025 mm
MaterialHSShigh-speed steel (HSS)
StandardDIN 206hand reamer
Number of cutting edgesZ = 12straight flutes

Technical data for the 48 H7 hand reamer

dimensions, standard, and shank specifications

Technical data
Cutting diameter DØ48 H7 · hole 48.000–48.025 mm
Hole tolerance zoneH7 (+0.025 / 0 mm)
TypeFixed-size shank-type hand reamer
Dimensional standardDIN 206
MaterialHSS (high-speed steel)
Flute length l163 mm
Shank length l₁120 mm
Overall length L326 mm
Number of cutting edges Z12 (straight flutes)
Shank / driveStraight shank with square drive (for a tap wrench)
Hand reamer 48 H7 NRTh DIN 206 in HSS — shank-type finishing reamer for cylindrical holes with a square drive for a tap wrench

Hand reamer 48 H7 NRTh — characteristics

construction, operation, and applications

Hand reamer 48 H7 NRTh conforming to DIN 206 is a shank-type finishing tool for cylindrical holes. After drilling, it brings a Ø48 hole to the precise tolerance grade H7 (48.000–48.025 mm) — it removes a small allowance around the entire circumference, improving the hole size, roundness and surface finish.

The tool body is made of high-grade high-speed steel (HSS) produced in Poland. The cutting section has straight flutes and 12 cutting edges: more edges distribute cutting forces more evenly, improving hole roundness and reducing vibration compared with a two-edge drill bit. The extended lead taper centers the reamer in the hole, while the square drive on the shank transmits torque from the tap wrench.

Reaming is a finishing operation, not a roughing operation. After drilling, the hole falls within the broad IT10–IT11 tolerance range; the reamer tightens its tolerance to H7, while also improving the wall finish. Note that the tool follows the existing hole and will not straighten a crooked hole — the initial hole must therefore be drilled perpendicular to the surface. Unlike a machine reamer, the hand version has an extended lead taper and more cutting edges, promoting even cutting. It works well in reconditioning worn holes — light reaming restores their correct size and smoothness.

H7 tolerance and Ø48 hole accuracy

final tolerance zone of the machined hole

Ø48 mm hole size by tolerance grade (ISO 286)

DesignationHole Ø range [mm]Deviations [mm]IT tolerance grade
48 H648.000 – 48.016+0.016 / 016 µm
48 H748.000 – 48.025+0.025 / 025 µm this product
48 H848.000 – 48.039+0.039 / 039 µm
48 H948.000 – 48.062+0.062 / 062 µm
48 H1148.000 – 48.160+0.160 / 0160 µm

Your reamer produces tolerance grade H7 — finished hole Ø48.000–48.025 mm; the value is stated directly, without conversion from tables. A narrower tolerance zone means a more accurate hole. The reamed surface is smooth — typically Ra 0.4–1.6 µm, significantly better than after drilling alone (approx. 1.6–3.2 µm).

Manual machining — how to ream Ø48 H7

tap wrench operation, allowance and predrilled hole

The reamer engages with the tap wrench through the square drive on the shank — guide it by hand, steadily and in one direction, with moderate pressure. For Ø48 H7, leave a 0.4–0.5 mm allowance on diameter; predrill the hole with a drill of Ø47.5 mm, and finish with a reamer. The larger diameter requires a sturdy tap wrench and more torque — guide the tool steadily. Generous lubrication with cutting oil is essential — it reduces resistance and improves the surface finish to Ra 0.4–1.6 µm (approx. 1.6–3.2 µm after drilling).

▲Important: is a tool for manual machining — it is not intended for powered operation at high speeds. High-speed steel loses hardness above approx. 600 °C, so lubricate generously. Do not stop the reamer in the hole or reverse rotation — always withdraw it while continuing to rotate forward; withdrawing without rotation risks chip jamming, chipped cutting edges and a poorer hole finish.

Applications — workpiece materials

groups P1.2–P1.3 according to the material classification

✓Unalloyed and structural steel
✓Free-machining steel
✓Nonferrous metals — brass, bronze, copper
✓Light alloys and soft metals
▲Alloy steel — possible with generous lubrication and low speeds
✗Hardened steel and hardened stainless steel — beyond the capabilities of HSS

Frequently asked questions

Yes — nonferrous metals and light alloys (brass, bronze, copper, aluminum) are among the recommended materials in group P1.2–P1.3, alongside unalloyed and free-machining steels. The limitations are hardened steels and hardened stainless steels, for which HSS is too soft.

The hole size falls within 48.000–48.025 mm (H7, +0.025 / 0 mm), and roughness drops to Ra 0.4–1.6 µm. By comparison, drilling alone leaves approx. 1.6–3.2 µm and a much looser IT10–IT11 tolerance grade.

The optimum diametral allowance is 0.4–0.5 mm. Drill the initial hole with a Ø47.5 mm drill bit; excessive allowance impairs the surface finish and loads the cutting edges, while insufficient allowance will not remove drilling marks.

Reviews

No customer reviews for the moment.

Add a review about the product

Hand reamer 48 H7 NRTh DIN 206 HSS B

Hand reamer 48 H7 NRTh DIN 206 HSS B

Shipping

All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE

Courier GLS Przelew24 / Prepayment 14,76 zł gross Delivery time 1 working day
Courier GLS Cash on delivery 17,26 zł gross Lead time 1 working day

This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.

More information