• 98% satisfied customers
  • 72h delivery
  • 30 dni na zwrot
Hand reamer fi 37 H7 NRTh DIN 206 HSS
search
  • Hand reamer fi 37 H7 NRTh DIN 206 HSS
  • Hand reamer fi 37 H7 NRTh DIN 206 HSS - nr. 1

Hand reamer 37 H7 NRTh DIN 206 HSS

038334
€77.68 tax inc.

Net price: €63.16

Instant Shipping
W magazynie: 10-100 szt.
W magazynie: 10-100 szt.

Instant Shipping

Call and order: (44) 755-04-05

Description

Cutting diameter DØ37 H7hole 37.000–37.025 mm
MaterialHSShigh-speed steel (HSS)
StandardDIN 206hand reamer
Number of cutting edgesZ = 12straight flutes

Technical data for the 37 H7 hand reamer

dimensions, standard, and shank specifications

Technical data
Cutting diameter DØ37 H7 · hole 37.000–37.025 mm
Hole tolerance zoneH7 (+0.025 / 0 mm)
TypeFixed-size shank-type hand reamer
Dimensional standardDIN 206
MaterialHSS (high-speed steel)
Flute length l152 mm
Shank length l₁90 mm
Overall length L305 mm
Number of cutting edges Z12 (straight flutes)
Shank / driveStraight shank with square drive (for a tap wrench)
Hand reamer 37 H7 NRTh DIN 206 in HSS — shank-type finishing reamer for cylindrical holes with a square drive for a tap wrench

Hand reamer 37 H7 NRTh — characteristics

construction, operation, and applications

Shank-type, fixed-size hand reamer 37 H7 NRTh (DIN 206) finishes cylindrical holes of diameter Ø37. It sizes them to the tolerance zone H7 (37.000–37.025 mm), removing only a few hundredths of a millimeter on the diameter; the result is an accurate hole with good roundness and a smooth wall.

The tool is made of high-quality Polish-made high-speed steel (HSS). The cutting section has straight flutes and 12 cutting edges that distribute cutting resistance over more edges — this improves hole roundness and reduces vibration compared with a two-lip drill. The extended, slightly tapered lead facilitates self-centering in the pilot hole, while the straight shank with square drive allows the reamer to be driven with a tap wrench in a smooth, steady motion.

This is a machining operation for finishing operation, not roughing: drilling produces a hole of grade IT10–IT11, whereas the reamer brings it to H7 and smooths the surface. Remember that a reamer follows the existing hole and will not correct a crooked hole — hence the need to drill the initial hole perpendicular to the surface and on axis. The hand version has a longer lead taper and more cutting edges than a machine reamer, making it easier to control during manual feeding. It is used when assembling bearing shells, for which an accurate, smooth hole determines correct seating.

H7 tolerance and Ø37 hole accuracy

final tolerance zone of the machined hole

Ø37 mm hole size by tolerance grade (ISO 286)

DesignationHole Ø range [mm]Deviations [mm]IT tolerance grade
37 H637.000 – 37.016+0.016 / 016 µm
37 H737.000 – 37.025+0.025 / 025 µm this product
37 H837.000 – 37.039+0.039 / 039 µm
37 H937.000 – 37.062+0.062 / 062 µm
37 H1137.000 – 37.160+0.160 / 0160 µm

Your reamer produces tolerance grade H7 — finished hole Ø37.000–37.025 mm; the value is stated directly, without conversion from tables. A narrower tolerance zone means a more accurate hole. The reamed surface is smooth — typically Ra 0.4–1.6 µm, significantly better than after drilling alone (approx. 1.6–3.2 µm).

Manual machining — how to ream Ø37 H7

tap wrench operation, allowance and predrilled hole

Drive is transmitted by a tap wrench fitted over the square drive of the shank; rotate the reamer smoothly in one direction with light, even pressure. For a Ø37 H7 hole, allow a 0.4–0.5 mm allowance on diameter and drill a pilot hole Ø36.5 mm, and hand ream to the finished size. The larger diameter requires a sturdy tap wrench and more torque — guide the tool steadily. Lubricate generously — cutting oil reduces resistance and provides a surface finish of Ra 0.4–1.6 µm, better than the approximately 1.6–3.2 µm obtained by drilling.

▲Important: is a tool for manual machining — it is not intended for powered operation at high speeds. High-speed steel loses hardness above approx. 600 °C, so lubricate generously. Do not stop the reamer in the hole or reverse rotation — always withdraw it while continuing to rotate forward; withdrawing without rotation risks chip jamming, chipped cutting edges and a poorer hole finish.

Applications — workpiece materials

groups P1.2–P1.3 according to the material classification

✓Unalloyed and structural steel
✓Free-machining steel
✓Nonferrous metals — brass, bronze, copper
✓Light alloys and soft metals
▲Alloy steel — possible with generous lubrication and low speeds
✗Hardened steel and hardened stainless steel — beyond the capabilities of HSS

Frequently asked questions

It performs best in unalloyed and free-machining steels, as well as nonferrous metals and light alloys (P1.2–P1.3). Machine alloy steel carefully with generous lubrication. Do not machine hardened steels or hardened stainless steels — these exceed the capabilities of HSS.

The H7 zone for Ø37 mm is +0.025 / 0 mm, so the finished hole falls within 37.000–37.025 mm. The reamed surface is smooth (Ra 0.4–1.6 µm) — considerably finer than after drilling alone (approximately 1.6–3.2 µm).

Drill a Ø36.5 mm pilot hole perpendicular to the surface, leaving a stock allowance of 0.4–0.5 mm on the diameter. Then hand-ream to the final size with steady rotation and generous lubrication.

Product accessories

Reviews

No customer reviews for the moment.

Add a review about the product

Hand reamer 37 H7 NRTh DIN 206 HSS

Hand reamer 37 H7 NRTh DIN 206 HSS

Shipping

All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE

Courier GLS Przelew24 / Prepayment 14,76 zł gross Delivery time 1 working day
Courier GLS Cash on delivery 17,26 zł gross Lead time 1 working day

This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.

More information