• 98% satisfied customers
  • 72h delivery
  • 30 dni na zwrot
Hand reamer fi 24 H7 NRTh DIN 206 HSS
search
  • Hand reamer fi 24 H7 NRTh DIN 206 HSS
  • Hand reamer fi 24 H7 NRTh DIN 206 HSS - nr. 1

Hand reamer 24 H7 NRTh DIN 206 HSS

1235
€42.08 tax inc.

Net price: €34.21

Instant Shipping
W magazynie: 10-100 szt.
W magazynie: 10-100 szt.

Instant Shipping

Call and order: (44) 755-04-05

Description

Cutting diameter DØ24 H7hole 24.000–24.021 mm
MaterialHSShigh-speed steel (HSS)
StandardDIN 206hand reamer
Number of cutting edgesZ = 10straight flutes

Technical data for the 24 H7 hand reamer

dimensions, standard, and shank specifications

Technical data
Cutting diameter DØ24 H7 · hole 24.000–24.021 mm
Hole tolerance zoneH7 (+0.021 / 0 mm)
TypeFixed-size shank-type hand reamer
Dimensional standardDIN 206
MaterialHSS (high-speed steel)
Flute length l115 mm
Shank length l₁86 mm
Overall length L231 mm
Number of cutting edges Z10 (straight flutes)
Shank / driveStraight shank with square drive (for a tap wrench)
Hand reamer 24 H7 NRTh DIN 206 in HSS — shank-type finishing reamer for cylindrical holes with a square drive for a tap wrench

Hand reamer 24 H7 NRTh — characteristics

construction, operation, and applications

Hand reamer 24 H7 NRTh (DIN 206) is a shank-type finishing reamer for cylindrical holes. It sizes a drilled Ø24 hole to the tolerance zone H7 (24.000–24.021 mm), removing a thin layer of material from the bore surface — a few hundredths of a millimeter on the diameter. In one pass, it improves the hole's dimensional accuracy, roundness, and surface finish.

The reamer is made from high-grade Polish HSS high-speed steel. Its 10 straight cutting edges each carry a lower cutting force — resulting in better hole roundness and reduced vibration compared with a drill with two cutting edges. The extended, slightly tapered lead helps align the tool with the axis of the predrilled hole, while the square drive on the shank transfers torque evenly from the tap wrench.

Reaming is a finishing operation, not a roughing operation. After drilling, the hole remains within a loose IT10–IT11 tolerance range, and the reamer improves its accuracy to H7 and smooths the surface. Bear in mind that the tool follows the existing hole and will not straighten a crooked hole — therefore, drill the initial hole perpendicular to the surface. Unlike a machine reamer, a hand reamer has a longer lead taper and more cutting edges, promoting even stock removal. It is well suited to finishing holes for pins and shafts, when a running fit or a light interference fit is required.

H7 tolerance and Ø24 hole accuracy

final tolerance zone of the machined hole

Ø24 mm hole size by tolerance grade (ISO 286)

DesignationHole Ø range [mm]Deviations [mm]IT tolerance grade
24 H624.000 – 24.013+0.013 / 013 µm
24 H724.000 – 24.021+0.021 / 021 µm this product
24 H824.000 – 24.033+0.033 / 033 µm
24 H924.000 – 24.052+0.052 / 052 µm
24 H1124.000 – 24.130+0.130 / 0130 µm

Your reamer produces tolerance grade H7 — finished hole Ø24.000–24.021 mm; the value is stated directly, without conversion from tables. A narrower tolerance zone means a more accurate hole. The reamed surface is smooth — typically Ra 0.4–1.6 µm, significantly better than after drilling alone (approx. 1.6–3.2 µm).

Manual machining — how to ream Ø24 H7

tap wrench operation, allowance and predrilled hole

The tool is driven by a tap wrench fitted over the square drive on the shank, turning it evenly in one direction with light, steady pressure. For a Ø24 H7 hole, allow a 0.3–0.4 mm allowance on diameter — predrill Ø23.6 mm, then ream by hand. The larger diameter requires a sturdy tap wrench and more torque — guide the tool steadily. Lubricate generously with cutting oil: this reduces resistance and allows a surface finish of Ra 0.4–1.6 µm, much smoother than after drilling (approx. 1.6–3.2 µm).

▲Important: is a tool for manual machining — it is not intended for powered operation at high speeds. High-speed steel loses hardness above approx. 600 °C, so lubricate generously. Do not stop the reamer in the hole or reverse rotation — always withdraw it while continuing to rotate forward; withdrawing without rotation risks chip jamming, chipped cutting edges and a poorer hole finish.

Applications — workpiece materials

groups P1.2–P1.3 according to the material classification

✓Unalloyed and structural steel
✓Free-machining steel
✓Nonferrous metals — brass, bronze, copper
✓Light alloys and soft metals
▲Alloy steel — possible with generous lubrication and low speeds
✗Hardened steel and hardened stainless steel — beyond the capabilities of HSS

Frequently asked questions

Primarily unalloyed and free-machining steels, nonferrous metals and light alloys (group P1.2–P1.3). Alloy steel can be machined with generous lubrication and low speeds. Hardened steels and hardened stainless steels are beyond the capabilities of HSS.

You will achieve an H7 hole, i.e. 24.000–24.021 mm (tolerance zone +0.021 / 0 mm). This is much tighter than drilling alone (IT10–IT11). The surface finish also improves to Ra 0.4–1.6 µm.

For this diameter, leave a 0.3–0.4 mm allowance and predrill a Ø23.6 mm hole. This allowance enables the reamer to remove an even layer, producing an accurate size and a smooth hole wall.

Product accessories

Reviews

No customer reviews for the moment.

Add a review about the product

Hand reamer 24 H7 NRTh DIN 206 HSS

Hand reamer 24 H7 NRTh DIN 206 HSS

Shipping

All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE

Courier GLS Przelew24 / Prepayment 14,76 zł gross Delivery time 1 working day
Courier GLS Cash on delivery 17,26 zł gross Lead time 1 working day

This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.

More information