• 98% satisfied customers
  • 72h delivery
  • 30 dni na zwrot
Hand reamer fi 3.2 H7 NRTh DIN 206 HSS Fra
search
  • Hand reamer fi 3.2 H7 NRTh DIN 206 HSS Fra
  • Hand reamer fi 3.2 H7 NRTh DIN 206 HSS Fra - nr. 1

Hand reamer 3.2 H7 NRTh DIN 206 HSS Fra

0000006757
€9.06 tax inc.

Net price: €7.37

Brak w magazynie
Brak w magazynie

Call and order: (44) 755-04-05

Description

Cutting diameter DØ3.2 H7hole 3.200–3.212 mm
MaterialHSShigh-speed steel (HSS)
StandardDIN 206hand reamer
Number of cutting edgesZ = 6straight flutes

Technical data for the 3.2 H7 hand reamer

dimensions, standard, and shank specifications

Technical data
Cutting diameter DØ3.2 H7 · hole 3.200–3.212 mm
Hole tolerance zoneH7 (+0.012 / 0 mm)
TypeFixed-size shank-type hand reamer
Dimensional standardDIN 206
MaterialHSS (high-speed steel, manufactured by FRA)
Flute length l33 mm
Shank length l₁24 mm
Overall length L66 mm
Number of cutting edges Z6 (straight flutes)
Shank / driveStraight shank with square drive (for a tap wrench)
Hand reamer 3.2 H7 NRTh DIN 206 in HSS — shank-type finishing reamer for cylindrical holes with a square drive for a tap wrench

Hand reamer 3.2 H7 NRTh — characteristics

construction, operation, and applications

This hand reamer 3.2 H7 NRTh (DIN 206) is a shank-type finishing tool for cylindrical holes. It is used for precision sizing of a Ø3.2 hole: it removes a few hundredths of a millimeter on diameter and brings the hole into the tolerance zone H7 (3.200–3.212 mm), while smoothing the hole wall and improving roundness.

The reamer is made from HSS high-speed steel supplied by the Serbian company FRA. Its 6 straight cutting edges distribute cutting resistance across more edges — the key to good hole roundness and operation without the vibration typical of drilling. The slightly tapered lead facilitates self-centering, while the straight shank with a square drive allows the tool to be operated with a tap wrench.

Reaming is a finishing operation, not a roughing operation. Drilling alone leaves the hole in a loose tolerance grade (around IT10–IT11), and only the reamer brings it to H7 and smooths the hole wall. Remember that the tool follows the existing hole and will not correct a crooked hole — drill the initial hole perpendicular to the surface and concentric with the intended axis. Unlike a machine reamer, a hand reamer has a longer tapered lead and more cutting edges, helping achieve even cutting with the lower rigidity of manual machining. It is used when installing bearing shells, for which an accurate, smooth hole determines correct seating.

H7 tolerance and Ø3.2 hole accuracy

final tolerance zone of the machined hole

Ø3.2 mm hole size by tolerance grade (ISO 286)

DesignationHole Ø range [mm]Deviations [mm]IT tolerance grade
3.2 H63.200 – 3.208+0.008 / 08 µm
3.2 H73.200 – 3.212+0.012 / 012 µm this product
3.2 H83.200 – 3.218+0.018 / 018 µm
3.2 H93.200 – 3.230+0.030 / 030 µm
3.2 H113.200 – 3.275+0.075 / 075 µm

Your reamer produces tolerance grade H7 — finished hole Ø3.200–3.212 mm; the value is stated directly, without conversion from tables. A narrower tolerance zone means a more accurate hole. The reamed surface is smooth — typically Ra 0.4–1.6 µm, significantly better than after drilling alone (approx. 1.6–3.2 µm).

Manual machining — how to ream Ø3.2 H7

tap wrench operation, allowance and predrilled hole

The tool is driven by a tap wrench fitted over the square drive on the shank; turn the tool evenly in one direction, applying light, continuous pressure. For Ø3.2 H7, allow a 0.1 mm allowance on diameter — predrilled hole Ø3.1 mm, followed by finishing with a hand reamer. With small diameters, guide the tool gently without lateral pressure — the slender shank is easily overloaded. Lubricate generously: cutting oil reduces cutting resistance and allows a surface finish down to Ra 0.4–1.6 µm compared with approx. 1.6–3.2 µm after drilling alone.

▲Important: is a tool for manual machining — it is not intended for powered operation at high speeds. High-speed steel loses hardness above approx. 600 °C, so lubricate generously. Do not stop the reamer in the hole or reverse rotation — always withdraw it while continuing to rotate forward; withdrawing without rotation risks chip jamming, chipped cutting edges and a poorer hole finish.

Applications — workpiece materials

groups P1.2–P1.3 according to the material classification

✓Unalloyed and structural steel
✓Free-machining steel
✓Nonferrous metals — brass, bronze, copper
✓Light alloys and soft metals
▲Alloy steel — possible with generous lubrication and low speeds
✗Hardened steel and hardened stainless steel — beyond the capabilities of HSS

Frequently asked questions

Metals in group P1.2–P1.3: unalloyed and free-machining steel, nonferrous metals (brass, bronze, copper) and light alloys. HSS cutting edges handle these materials well; do not use the tool on hardened steel or hardened stainless steel.

The upper deviation is +0.012 / 0 mm — the hole is no smaller than 3.200 mm and no larger than 3.212 mm. Reaming also provides a smooth surface of Ra 0.4–1.6 µm, better than drilling.

Use a Ø3.1 mm drill — this leaves a 0.1 mm allowance on diameter for reaming. Remove the remainder with a hand reamer, guiding it evenly and lubricating generously.

Product accessories

Tap wrench No. 1

Reference: 4926 In stock > 10 items

€3.68

€4.53 brutto

Reviews

No customer reviews for the moment.

Add a review about the product

Hand reamer 3.2 H7 NRTh DIN 206 HSS Fra

Hand reamer 3.2 H7 NRTh DIN 206 HSS Fra

Shipping

All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE

Courier GLS Przelew24 / Prepayment 14,76 zł gross Delivery time 1 working day
Courier GLS Cash on delivery 17,26 zł gross Lead time 1 working day

This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.

More information