• 98% satisfied customers
  • 72h delivery
  • 30 dni na zwrot
Morse taper reamer MK3 DIN 204 C HSS
search
  • Morse taper reamer MK3 DIN 204 C HSS
  • Morse taper reamer MK3 DIN 204 C HSS - nr. 1

Morse taper reamer MK3 DIN 204 C HSS

0000005452
Diameter (mm): MK329 sizes of this reamer
€51.79 tax inc.

Net price: €42.11

Instant Shipping
W magazynie: 10-100 szt.
W magazynie: 10-100 szt.

Instant Shipping

Call and order: (44) 755-04-05

Description

Mounting taperMT3DIN 228 · taper ratio 1:20
MaterialHSShigh-speed steel (HSS)
Diameters d₁–d₂Ø20–24.8tip → shank
Number of cutting edgesZ = 8straight flutes

Technical data for the MT3 taper reamer

dimensions, standard, and shank specifications

Technical data
Mounting taperMorse taper MT3 (DIN 228)
Taper ratio / taper angle1:20 · 2.86°
Small diameter d₁Ø 20 mm
Large diameter d₂Ø 24.8 mm
Shank diameter d₃Ø 22 mm
Flute length l₂110 mm
Overall length L185 mm
Drive square width a16.6 mm
Number of cutting edges Z8 (straight flutes)
MaterialHSS (high-speed steel)
Type / shankNRSa, hand-operated · straight shank with square drive
Morse taper reamer MT3 DIN 204 C HSS — drawing Hand reamer: square drive, round straight shank and tapered cutting section with 8 straight flutes. Largest diameter 24.8 mm at the shank, smallest diameter 20 mm at the tip. Ø 24.8 mm largest diameter (d₂) Ø 20 mm smallest diameter (d₁) drive straight shank tapered cutting section l₂ = 110 mm · Z = 8 cutting edges

MT3 taper reamer — features

construction, operation, and applications

Morse taper reamer MT3 (DIN 204 C) is a hand-operated finishing tool for precision sizing of Morse taper sockets No. 3. Its 8 straight cutting edges made from high-speed steel (HSS) HSS remove a thin layer, giving the socket an accurate profile, correct concentricity and a smooth taper surface.

The tool is operated by hand — the square drive, 16.6 mm across flats, fits into a tap wrench, and machining is performed with an even, steady motion in one direction. The constant taper ratio of 1:20 (taper angle 2.86°) matches the standardized MT3 profile according to DIN 228. Distributing the cut across 8 edges improves roundness and dampens vibration, while the tapered tip ensures concentric entry.

A hand reamer has a longer tapered lead and more cutting edges than a machine reamer, making even cutting easier with manual feed. It is suitable for sizing and restoring MT3 sockets in machine tool spindles, reduction sleeves and tool holders — wherever taper accuracy determines a tight, self-holding fit of the arbor.

Morse taper No. 3 is used in medium-sized lathes and milling machines, industrial drills, and the spindles and tailstocks of larger machine tools. The NRSa MT3 reamer sizes sockets that transmit higher torque and feed forces than sizes MT0–MT2.

Taper ratio 1:20 — what it means in practice

the shallow Morse taper on this reamer

A taper ratio of 1:20 means that for every 20 mm of length, the diameter increases by 1 mm. This is a very shallow taper — to the naked eye, the tool looks almost cylindrical, and the difference only becomes apparent when comparing both ends. The diameter increases from Ø 20 mm at the tip (d₁) to Ø 24.8 mm at the shank (d₂); the included taper angle is only 2.86° (half-angle 1.43°).

Reamer taper ratio 1:20 — over 20 mm of length, the diameter increases by 1 mm, angle 2.86° Taper triangle for 1:20 with exaggerated vertical proportions. taper ratio 1:20 (enlarged) 2.86° +1 mm diameter 20 mm of length (vertical proportions exaggerated)

Manual machining — how to size an MT3 socket

tap wrench operation, cooling and inspection

Machining Morse taper sockets step by step

1Preparation

Clean and degrease the socket

2Mounting

Square drive 16.6 mm in the tap wrench

3Reaming

Clockwise rotation, with coolant

✓Inspection

Check the fit (bluing)

Practical tips:

  • Use oil or a coolant emulsion — this improves the surface finish and extends cutting edge life.
  • Turn the reamer evenly, without jerking; do not reverse it under load, to avoid chipping the cutting edges.
  • After machining, remove chips from the flutes and socket before checking the fit.
  • Check the taper fit by bluing — an even contact pattern indicates full surface contact.

Hand reamer — intended for manual operation (tap wrench), not for high-speed machine operation. HSS loses hardness above approx. 600 °C, so lubricate generously. Do not use on steels hardened above 45 HRC.

Applications — workpiece materials

classification according to ISO 513

ISO groupMaterialSuitability
P Unalloyed steelgrades P1.2–P1.3 Recommended
N Nonferrous metalsaluminum, brass, bronze Recommended
K Cast irongray, ductile Suitable
M Stainless steelaustenitic With limitations
H Hardened steelabove 45 HRC Not recommended

Frequently asked questions

Morse taper sockets No. 3 (MT3) conforming to DIN 228 — in machine tool spindles, reduction sleeves and tool holders. The 1:20 taper ratio matches the standardized MT3 profile.

MT3 is used in medium-sized lathes and milling machines and higher-powered industrial drills.

By a square drive 16.6 mm across flats, held in a tap wrench. The 8 straight cutting edges guide the tool along the socket axis, ensuring an even machining allowance.

Unalloyed steels in grades P1.2–P1.3, nonferrous metals, cast iron and thermosetting plastics. Not suitable for steels hardened above 45 HRC.

Product accessories

Reviews

No customer reviews for the moment.

Add a review about the product

Morse taper reamer MK3 DIN 204 C HSS

Morse taper reamer MK3 DIN 204 C HSS

Shipping

All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE

Courier GLS Przelew24 / Prepayment 14,76 zł gross Delivery time 1 working day
Courier GLS Cash on delivery 17,26 zł gross Lead time 1 working day

This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.

More information