• 98% satisfied customers
  • 72h delivery
  • 30 dni na zwrot
Pilot 16x9 HSS countersink - Artykuły Techniczne
search
  • Pilot 16x9 HSS countersink - Artykuły Techniczne
  • Pilot 16x9 HSS countersink - Artykuły Techniczne - nr. 1
Poland

Counterbore 16X9 DIN 373 HSS

Poland Poland
13334
€21.36 tax inc.

Net price: €17.37

Brak w magazynie
Brak w magazynie

Call and order: (44) 755-04-05

Description

Cutting diameterØ16 mm
Pilot diameterØ9 mm
Overall length100 mm
Straight shankØ12.5 mm

16×9 mm counterbore with pilot

Type NWCa · DIN 373 · high-speed steel (HSS) · Artykuly Techniczne brand

16×9 mm counterbore with pilot (type NWCa), manufactured to DIN 373, produces flat seats Ø16 mm in holes with a diameter of 9 mm. This pair of dimensions outside the standard metric screw series is suitable for seats for nonstandard screw heads, washers, sleeves, and locating components. The fixed pilot Ø9 mm guides the tool coaxially and prevents the counterbore from drifting sideways in the hole. The tool bears the Polish brand Artykuly Techniczne — manufactured in Poland.

Technical data
Counterbore diameter D 16 mm
Pilot diameter d₁ 9 mm
Shank diameter d 12.5 mm
Flute length l 22 mm
Pilot length l₁ 10 mm
Shank length l₂ 40 mm
Overall length L 100 mm
Number of cutting edges Z 3
Material HSS
Standard DIN 373 NWCa
Brand Artykuly Techniczne
Country of manufacture Poland
16x9 mm DIN 373 HSS counterbore with guide pilot — dimensioned technical drawing

Applications and workpiece materials

Applications and materials for the 16×9 mm counterbore

Typical applications:

✓ Flat Ø16 mm seats in holes with a diameter of 9 mm
✓ Seats for nonstandard screw heads, washers, and sleeves
✓ Spotfacing around the hole
✓ Use on CNC machines, drilling machines, and conventional machine tools

Workpiece materials

✓Structural and carbon steels
✓Copper, brass, bronze
✓Aluminum and light alloys
▲Alloy and stainless steels — with coolant
✗Hardened steels above 45 HRC

Fixed pilot — centering and perpendicularity

Pilot Ø9 mm enters a hole with a diameter of 9 mm and guides the tool coaxially, keeping the counterbore perpendicular to the hole axis and allowing full surface contact under the screw head. Steel HSS retains its cutting hardness up to an operating temperature of approx. 600°C.

Cutting data

Guideline values for HSS · Ø16 mm

Material group (ISO 513)Vc [m/min]fz [mm/tooth]n [rpm] · Ø16f [mm/min] · Z=3
PStructural and alloy steel 5–25 0.03–0.10 100–500 9–150
MStainless steel 6–15 0.03–0.06 120–300 11–55
KCast iron 10–20 0.08–0.12 200–400 50–140
NNonferrous metals (Al, Cu, brass) 15–80 0.06–0.14 300–1 600 55–670
SDifficult-to-machine alloys and titanium 8 0.04 ≈160 ≈19

Vc — cutting speed, fz — feed per tooth. Columns n and f calculated for D = 16 mm and Z = 3 (rounded). For tools made of steel HSS-E the cutting parameters can be increased by 25%.

How n and f were calculated (Ø16, Z = 3)

Spindle speed n = (Vc × 1000) ÷ (π × D), feed rate per minute f = fz × Z × n. Example for steel (Vc = 20, fz = 0.1): n = 20 000 ÷ 50.3 ≈ 400 rpm, f = 0.1 × 3 × 400 ≈ 120 mm/min. Start at the lower end of the range and adjust according to the material and clamping rigidity.

Tips and limitations

How to extend tool life

HSS limitations

The tool is not intended for hardened steels above 45 HRC. For stainless and alloy steels, reduce the speed and use coolant — overheating accelerates cutting edge wear. Make sure the guide hole diameter matches the pilot Ø9 mm.

Frequently asked questions

The Ø9 mm pilot guides the tool in a hole with a diameter of 9 mm (sliding fit — the hole must not be smaller than the pilot). In this hole, the counterbore machines a flat, perpendicular seat with a diameter of Ø16 mm — for example, for a nonstandard screw head, washer, or sleeve.

Yes — the tool has a Ø12.5 mm straight shank and fits drill chucks and collets. However, at a diameter of Ø16 mm, low speeds (approx. 100–500 rpm for steel) and rigid workpiece clamping are recommended — preferably a benchtop or pillar drill rather than a handheld drill.

Yes — for ISO M materials (stainless steel), operate at a reduced cutting speed (Vc approx. 6–15 m/min, or approx. 120–300 rpm for Ø16 mm) and use coolant to limit work hardening and overheating. Do not use the tool on hardened steels above 45 HRC.

Reviews

No customer reviews for the moment.

Add a review about the product

Counterbore 16X9 DIN 373 HSS

Counterbore 16X9 DIN 373 HSS

Shipping

All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE

Courier GLS Przelew24 / Prepayment 14,76 zł gross Delivery time 1 working day
Courier GLS Cash on delivery 17,26 zł gross Lead time 1 working day

This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.

More information