- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Description
Cutting diameterØ14 mm
Pilot diameterØ9 mm
Overall length100 mm
Straight shankØ12.5 mm
14×9 mm counterbore with pilot
Type NWCa · DIN 373 · high-speed steel (HSS) · Artykuly Techniczne brand
14×9 mm counterbore with pilot (type NWCa per standard DIN 373) is used to machine predrilled holes Ø9 mm — producing a flat, perpendicular seat in them with a diameter of Ø14 mm. A size outside the standard screw series is useful for nonstandard heads, spacer washers, and journals. The pilot Ø9 mm keeps the counterbore coaxial with the hole. High-speed steel HSS allows machining of steel, cast iron, aluminum, and nonferrous metals. A tool from the Polish brand Artykuly Techniczne.
| Technical data | |
|---|---|
| Counterbore diameter D | 14 mm |
| Pilot diameter d₁ | 9 mm |
| Shank diameter d | 12.5 mm |
| Flute length l | 22 mm |
| Pilot length l₁ | 8 mm |
| Shank length l₂ | 40 mm |
| Overall length L | 100 mm |
| Number of cutting edges Z | 3 |
| Material | HSS |
| Standard | DIN 373 NWCa |
| Brand | Artykuly Techniczne |
| Country of manufacture | Poland |
Applications and workpiece materials
Applications and materials for the 14×9 mm counterbore
Typical applications:
| ✓ | Flat Ø14 mm seats in holes with a diameter of 9 mm |
| ✓ | Seats for nonstandard screw heads, washers, and sleeves |
| ✓ | Spotfacing around the hole |
| ✓ | Use on CNC machines, drilling machines, and conventional machine tools |
Workpiece materials
✓Structural and carbon steels
✓Copper, brass, bronze
✓Aluminum and light alloys
▲Alloy and stainless steels — with coolant
✗Hardened steels above 45 HRC
Fixed pilot — centering and perpendicularity
Pilot Ø9 mm enters a hole with a diameter of 9 mm and guides the tool coaxially, keeping the counterbore perpendicular to the hole axis and allowing full surface contact under the screw head. Steel HSS retains its cutting hardness up to an operating temperature of approx. 600°C.
Cutting data
Guideline values for HSS · Ø14 mm
| Material group (ISO 513) | Vc [m/min] | fz [mm/tooth] | n [rpm] · Ø14 | f [mm/min] · Z=3 |
|---|---|---|---|---|
| PStructural and alloy steel | 5–25 | 0.03–0.10 | 110–570 | 10–170 |
| MStainless steel | 6–15 | 0.03–0.06 | 140–340 | 12–60 |
| KCast iron | 10–20 | 0.08–0.12 | 230–450 | 55–160 |
| NNonferrous metals (Al, Cu, brass) | 15–80 | 0.06–0.14 | 340–1 800 | 60–760 |
| SDifficult-to-machine alloys and titanium | 8 | 0.04 | ≈180 | ≈22 |
Vc — cutting speed, fz — feed per tooth. Columns n and f calculated for D = 14 mm and Z = 3 (rounded). For tools made of steel HSS-E the cutting parameters can be increased by 25%.
How n and f were calculated (Ø14, Z = 3)
Spindle speed n = (Vc × 1000) ÷ (π × D), feed rate per minute f = fz × Z × n. Example for steel (Vc = 20, fz = 0.1): n = 20 000 ÷ 44.0 ≈ 450 rpm, f = 0.1 × 3 × 450 ≈ 140 mm/min. Start at the lower end of the range and adjust according to the material and clamping rigidity.
Tips and limitations
How to extend tool life
HSS limitations
The tool is not intended for hardened steels above 45 HRC. For stainless and alloy steels, reduce the speed and use coolant — overheating accelerates cutting edge wear. Make sure the guide hole diameter matches the pilot Ø9 mm.
Frequently asked questions
The Ø9 mm pilot guides the tool in a hole with a diameter of 9 mm (sliding fit — the hole must not be smaller than the pilot). In this hole, the counterbore machines a flat, perpendicular seat with a diameter of Ø14 mm — for example, for a nonstandard screw head, washer, or sleeve.
Yes — the tool has a Ø12.5 mm straight shank and fits drill chucks and collets. However, at a diameter of Ø14 mm, low speeds (approx. 110–570 rpm for steel) and rigid workpiece clamping are recommended — preferably a benchtop or pillar drill rather than a handheld drill.
Yes — for ISO M materials (stainless steel), operate at a reduced cutting speed (Vc approx. 6–15 m/min, or approx. 140–340 rpm for Ø14 mm) and use coolant to limit work hardening and overheating. Do not use the tool on hardened steels above 45 HRC.
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.