Polski 
- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Machine Tap M15X1.5 DIN 374 B HSSE
12944
Thread size: M15x1,561 sizes of this tap
M5x0,5M10x1M10x1,25M11x0,75M12x1M12x1,25M12x1,5M14x1M14x1,25M14x1,5M15x1M15x1,25M15x1,5M16x1M16x1,5M17x1M18x1M18x1,5M18x2M20x0,75M20x1M20x1,25M20x1,5M20x2M22x1,5M22x2M24x1M24x1,5M24x2M25x1M25x1,5M25x2M26x1,5M27x1,5M28x1,5M30x1,5M30x2M30x3M32x1M32x1,5M32x2M33x1,5M33x2M35x1,5M36x1,5M36x2M36x3M38x1,5M39x1,5M39x2M40x1,5M42x1,5M42x2M42x3M48x1,5M50x2M52x2M56x3M60x3M64x3M64x4
€31.72 tax inc.
Net price: €25.79
Description
Material HSSE
Thread size M15x1.5
ChamferB (3.5–5.5) threads
Standard DIN 374
Technical data for the M15x1.5 machine tap
| Technical Data | |
|---|---|
| Nominal Diameter d1 | M15x1.5 |
| Thread Pitch P | 1.5 mm |
| Overall Length l1 | 100 mm |
| Flute Length l2 | 10 mm |
| Shank Diameter d2 | 12 mm |
| Square Drive Size a | 9 mm |
| Tap Drill Diameter | 13.5 mm |
| Chamfer | B (3.5÷5.5) P |
| Thread tolerance | 6H |
How the type B through-hole chamfer pushes chips down the hole
Chips exit at the bottom instead of returning through the thread
The form B chamfer for through holes has a chip breaker at the tip of the tap – an angled cut in the cutting edges. The chip breaker directs the chip down the hole, ahead of the tap tip. The chip curls into a coil, breaks into short pieces and exits the hole on the other side of the workpiece. The threads already cut remain clean because the chip does not pass through them on its way up. The M15x1.5 tap has a reduced shank according to DIN 374: diameter 12 mm, square size 9 mm.
1
Straight flute – chips do not enter it; the flute carries lubricant to the cutting edges.
2
The chip breaker at the tip of the tap directs chips down the hole.
3
The tap rotates clockwise to cut a right-hand thread.
4
B chamfer: 3.5–5.5 incomplete threads on the entry taper.
5
The chips break into segments: individual pieces at the top of the hole, with progressively more farther down. They fall out below the workpiece.
6
Feed 1.5 mm/rev, equal to the pitch of the M15x1.5 thread.
M15x1.5 fine-thread machine tap – HSSE for industrial applications
The M15x1.5 metric fine thread machine tap is a specialized tool for cutting internal threads with a nonstandard diameter of 15 mm and a pitch of 1.5 mm for industrial applications. Its HSSE high-speed steel construction with 5% added cobalt ensures a hardness of 65-67 HRC and optimum tool life when machining difficult-to-machine materials requiring high precision. The 1.5 mm pitch is a standard fine pitch for diameters in the M14-M16 range, offering a good balance between strength and assembly speed. The tool is designed for professional toolrooms and prototype shops fulfilling industrial orders.
Key features of the M15x1.5 metric fine thread machine tap
- Nonstandard M15 size fills the gap between the popular M14 and M16 sizes, used in special designs with specific dimensional or strength requirements
- Fine thread with a 1.5 mm pitch is the standard fine pitch for this diameter group, providing good strength and sealing of the threaded connection
- HSSE steel with 5% cobalt guarantees a hardness of 65-67 HRC and thermal resistance up to 650°C required when machining alloy steels and difficult-to-machine materials
- The 6H tolerance in accordance with DIN 374 ensures thread accuracy and full interchangeability with fasteners used in industry and prototype shops
- Material versatility covering structural steels up to 800 MPa, alloy steels, austenitic stainless steels 304/316, and gray and ductile cast iron
- The recommended tap drill diameter of 13.5 mm for the M15x1.5 metric fine thread ensures optimal thread engagement with minimal tool load
The M15x1.5 machine tap is used in industrial hydraulics, prototype shops, and special applications requiring a nonstandard M15 diameter with a fine pitch. Form B with straight flutes directs chips forward when tapping through holes. Cooling with an oil emulsion at a concentration of 6-8% is recommended to maintain optimum tool life.
| Material | Cutting speed Vc [m/min] | Spindle speed n [rpm] | Feed f [mm/min] |
|---|---|---|---|
| PSteel | 5-20 | 106-424 | 159-636 |
| MStainless steel | 5-10 | 106-212 | 159-318 |
| KCast iron | 5-15 | 106-318 | 159-477 |
| NAluminum | 10-25 | 212-531 | 318-796 |
Thread preparation M15x1.5 in a through hole
1 Spot drilling
NC spotting drill 90°
2 Drilling
Ø 14.85 mm
3 Tapping
M15x1.5
✓ Done!
Tolerance 6H
Standard: DIN 374 | Chamfer: B (straight) | Application: through holes
Tolerance 6H — metric thread tolerance classes
| Class | Accuracy | Application | Status |
|---|---|---|---|
| 4H / 4g | High | Precision connections, hydraulics | — |
| 6H / 6g | Standard | Machine building, general-purpose | SELECTED |
| 7H / 8g | Low | Large clearance, easy assembly | — |
6H = internal thread (nut, hole) | 6g = external thread (screw)
Frequently asked questions
The M15x1.5 thread is used in industrial hydraulics, prototype shops, and special applications where standard M14 or M16 sizes do not meet design requirements.
The recommended tap drill diameter for the M15x1.5 metric fine thread is 13.5 mm. Precise hole machining ensures full thread engagement.
M15 is a nonstandard size, and M15x1.5 fasteners may require a special order. Checking availability with industrial suppliers in advance is recommended.
Product accessories
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.