Polski 
- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Description
Material HSSE
Thread size M39
ChamferB (3.5–5.5) threads
Standard DIN 376
Technical data for the M39 machine tap
| Technical Data | |
|---|---|
| Nominal Diameter d1 | M39 |
| Thread Pitch P | 4 mm |
| Overall Length l1 | 200 mm |
| Flute Length l2 | 60 mm |
| Shank Diameter d2 | 32 mm |
| Square Drive Size a | 24 mm |
| Tap Drill Diameter | 35 mm |
| Chamfer | B (3.5÷5.5) P |
| Thread tolerance | 6H |
How the type B through-hole chamfer pushes chips down the hole
Chips exit at the bottom instead of returning through the thread
The type B through-hole chamfer has a chip breaker at the tip of the tap – an angled notch in the cutting edges. The chip breaker directs chips down the hole, ahead of the tap tip. The chips curl into a spring shape, break into short pieces and exit the hole on the other side of the workpiece. The threads already cut remain clean because the chips do not pass through them on their way up. The M39 x4 tap has a reduced shank to DIN 376: diameter 32 mm, square size 24 mm.
1
Straight flute – chips do not enter it; the flute carries lubricant to the cutting edges.
2
The chip breaker at the tip of the tap directs chips down the hole.
3
The tap rotates clockwise to cut a right-hand thread.
4
B chamfer: 3.5–5.5 incomplete threads on the entry taper.
5
The chips break into segments: individual pieces at the top of the hole, with progressively more farther down. They fall out below the workpiece.
6
Feed 4 mm/rev, equal to the pitch of the M39 x4 thread.
M39 machine tap for through holes – Fra HSSE with DIN 376 long shank
Manufacturer Fra offers an M39 machine tap for through holes made of HSSE high-speed steel with 5% added cobalt for machine building and special designs. The long shank in accordance with DIN 376 provides increased clamping rigidity and improved tool guidance when tapping the nonstandard M39 diameter. The 6H tolerance ensures dimensional repeatability. The M39 diameter is a special size used in applications where standard M36 or M42 sizes do not meet design requirements.
Benefits and applications of the Fra M39 machine tap
- Manufacturer Fra as a specialist in special-purpose taps, guarantees high manufacturing quality and accurate nonstandard thread geometry
- Nonstandard M39 size used in specialized industrial applications requiring an intermediate diameter between M36 and M42
- Long shank to DIN 376 provides greater clamping rigidity and better tool guidance, which is essential when tapping large diameters
- HSSE steel with 5% cobalt ensures a hardness of 65-67 HRC and heat resistance up to 650°C, extending cutting edge life
- The 6H tolerance in accordance with DIN 376 ensures thread accuracy and full interchangeability with fasteners
- Metric pitch of 4 mm in accordance with DIN 13 for M39 coarse threads, with a recommended tap drill diameter of 35 mm
The Fra M39 machine tap is used in specialized machinery designs and heavy industry where a nonstandard diameter is required. Form B with straight flutes directs chips forward when tapping through holes. Cooling with an oil emulsion at a concentration of 8-10% is recommended.
| Material | Cutting speed Vc [m/min] | Spindle speed n [rpm] | Feed f [mm/min] |
|---|---|---|---|
| PSteel | 5-20 | 41-163 | 164-652 |
| MStainless steel | 5-10 | 41-82 | 164-328 |
| KCast iron | 5-15 | 41-122 | 164-488 |
| NAluminum | 10-25 | 82-204 | 328-816 |
Thread preparation M39 in a through hole
1 Spot drilling
NC spotting drill 90°
2 Drilling
Ø 35 mm
3 Tapping
M39
✓ Done!
Tolerance 6H
Standard: DIN 376 | Chamfer: B (straight) | Application: through holes
Tolerance 6H — metric thread tolerance classes
| Class | Accuracy | Application | Status |
|---|---|---|---|
| 4H / 4g | High | Precision connections, hydraulics | — |
| 6H / 6g | Standard | Machine building, general-purpose | SELECTED |
| 7H / 8g | Low | Large clearance, easy assembly | — |
6H = internal thread (nut, hole) | 6g = external thread (screw)
Frequently asked questions
The M39 thread is used in specialized industrial applications where standard M36 or M42 sizes do not meet design requirements for diameter or load capacity.
The recommended tap drill diameter for the M39 coarse thread is 35 mm. Accurate hole machining ensures a full thread profile.
M39 is a nonstandard size, and fasteners may require a special order. Checking availability with industrial suppliers in advance is recommended.
Product accessories
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.