Tapered Reamer 1:16 1/4 HSS ASME B94.2-1995

Technical data of conical reamer for 1/4 inch threads

- diameter d1 - 10.30 mm

- diameter d2 - 12,00 mm

- convergence - 1:16

- shank diameter d3 - 14,3 mm,

- total length l1 - 62 mm,

- length of the working part l2 - 27 mm,

- square driver a - 10,7 mm,

- for thread - 1/4 inch NPT, NPTF, RC.

- taper angle 1:16 - 3.58 degrees

Tapered reamer for 1/4 inch tapered threads

Tapered reamer1/4 inch under tapered threads, designed for machining holes under Tapered threads with a taper angle of 1:16. Rc and NPT and NPTF threads. Reamer designed for machining holes for 1/4 inch tapered threads with a convergence of 1:16. Rc and NPT, NPTF threads. Modern 1/4 inch tapered reamer for tapered threads, type NRSk recommended for finishing holes for tapered threads with a convergence of 1:16 (Rc and NPT threads. Suitable for manual machining with a special knob, it has a square collector. The reamer is designed to perform fine machining. Its task is to adjust the dimensions of the hole to predetermined parameters, as well as to achieve a predetermined tolerance and roughness. The reamer is recommended for unit machining and small batches. It is suitable for cutting carbon steels, metals, nonferrous metals, metal alloys and thermosetting plastics. It is made entirely of modern high speed steel HSS (High Speed Steel), which guarantees high quality machining, higher tool durability for harsh working conditions, as well as increased resistance to possible mechanical damage to the blades.