Polski 
- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Description
Material HSSE
Thread size M6
ChamferB (3.5–5.5) threads
Standard DIN 371
Technical data for the M6 machine tap
| Technical Data | |
|---|---|
| Nominal Diameter d1 | M6 |
| Thread Pitch P | 1 mm |
| Overall Length l1 | 80 mm |
| Flute Length l2 | 18 mm |
| Length l3 | 30 mm |
| Shank Diameter d2 | 6 mm |
| Square Drive Size a | 4.9 mm |
| Tap Drill Diameter | 5 mm |
| Chamfer | B (3.5÷5.5) P |
| Thread tolerance | 6H |
How the type B through-hole chamfer pushes chips down the hole
Chips exit at the bottom instead of returning through the thread
The form B through-hole chamfer has a chip breaker at the front of the tap – an angled cut in the cutting edges. The chip breaker directs chips down the hole, ahead of the tap tip. The chip curls into a coil, breaks into short pieces, and exits the hole on the other side of the workpiece. Threads already cut remain clean because chips do not pass through them on their way up. The M6 x1 tap has a reinforced shank in accordance with DIN 371: diameter 6 mm, square 4.9 mm.
1
Straight flute – chips do not enter it; the flute carries lubricant to the cutting edges.
2
The chip breaker at the tip of the tap directs chips down the hole.
3
The tap rotates clockwise to cut a right-hand thread.
4
B chamfer: 3.5–5.5 incomplete threads on the entry taper.
5
The chips break into segments: individual pieces at the top of the hole, with progressively more farther down. They fall out below the workpiece.
6
Feed 1 mm/rev, equal to the pitch of the M6 x1 thread.
M6 through-hole machine tap – cobalt HSSE DIN 371
The manufacturer offers the M6 through-hole machine tap made of HSSE high-speed steel with 5% cobalt for professional applications in series production and maintenance. M6 is among the very most popular metric thread sizes used across all industries. The short shank according to DIN 371 provides compact dimensions and compatibility with standard tool holders. The 6H tolerance ensures the dimensional repeatability required in series production.
Advantages and applications of the M6 HSSE machine tap
- Most popular M6 size used across all industries — from electronics through automotive to heavy machinery manufacturing
- HSSE steel with 5% cobalt guarantees a hardness of 65-67 HRC and thermal resistance up to 650°C, extending cutting edge life under intensive use
- Short shank in accordance with DIN 371 compatible with ER16 and ER20 collet chucks, collets, and tapping chucks with axial compensation
- The 6H tolerance to DIN 371 ensures thread precision and full interchangeability with standard-class fasteners
- Material versatility covering structural steels up to 800 MPa, alloy steels, austenitic stainless steels, cast iron, and aluminum
- Metric pitch of 1 mm in accordance with DIN 13 for M6 coarse threads, with a recommended tap drill diameter of 5 mm
The M6 through-hole machine tap is used in series production across all industries, on assembly lines, and in maintenance departments for thread repairs and restoration. Form B with straight flutes ensures effective chip evacuation. The tool requires cooling with an oil emulsion at a minimum concentration of 6-8%.
| Material | Cutting speed Vc [m/min] | Spindle speed n [rpm] | Feed f [mm/min] |
|---|---|---|---|
| PSteel | 5-20 | 265-1061 | 265-1061 |
| MStainless steel | 5-10 | 265-531 | 265-531 |
| KCast iron | 5-15 | 265-796 | 265-796 |
| NAluminum | 10-25 | 531-1326 | 531-1326 |
Thread preparation M6 in a through hole
1 Spot drilling
NC spotting drill 90°
2 Drilling
Ø 5 mm
3 Tapping
M6
✓ Done!
Tolerance 6H
Standard: DIN 371 | Chamfer: B (straight) | Application: through holes
Tolerance 6H — metric thread tolerance classes
| Class | Accuracy | Application | Status |
|---|---|---|---|
| 4H / 4g | High | Precision connections, hydraulics | — |
| 6H / 6g | Standard | Machine building, general-purpose | SELECTED |
| 7H / 8g | Low | Large clearance, easy assembly | — |
6H = internal thread (nut, hole) | 6g = external thread (screw)
Frequently asked questions
The M6 HSSE tap performs well in structural steels up to 800 MPa, alloy steels, austenitic stainless steels 304/316, gray and ductile cast iron, aluminum, and brass.
The recommended tap drill diameter for the M6 coarse thread is 5 mm. Accurate hole preparation ensures a full thread profile and minimizes the load on the tap.
With proper cooling, the M6 HSSE tap cuts 400-600 threads in structural steel and 200-300 threads in stainless steel. Dry operation reduces tool life by 30-40%.
Product accessories
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.