- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Description
Material HSSE-PM
Thread size M6
ChamferB (3.5–5.5) threads
Standard DIN 376
Technical data for the M6 machine tap
| Technical Data | |
|---|---|
| Nominal Diameter d1 | M6 |
| Thread Pitch P | 1 mm |
| Overall Length l1 | 80 mm |
| Flute Length l2 | 18 mm |
| Shank Diameter d2 | 4.5 mm |
| Square Drive Size a | 3.4 mm |
| Tap Drill Diameter | 5 mm |
| Chamfer | B (3.5÷5.5) P |
| Thread tolerance | 6H |
How the type B through-hole chamfer pushes chips down the hole
Chips exit at the bottom instead of returning through the thread
The type B through-hole chamfer has a chip breaker at the tip of the tap – an angled notch in the cutting edges. The chip breaker directs chips down the hole, ahead of the tap tip. The chips curl into a spring shape, break into short pieces and exit the hole on the other side of the workpiece. The threads already cut remain clean because the chips do not pass through them on their way up. The M6 x1 tap has a reduced shank to DIN 376: diameter 4.5 mm, square size 3.4 mm.
1
Straight flute – chips do not enter it; the flute carries lubricant to the cutting edges.
2
The chip breaker at the tip of the tap directs chips down the hole.
3
The tap rotates clockwise to cut a right-hand thread.
4
B chamfer: 3.5–5.5 incomplete threads on the entry taper.
5
The chips break into segments: individual pieces at the top of the hole, with progressively more farther down. They fall out below the workpiece.
6
Feed 1 mm/rev, equal to the pitch of the M6 x1 thread.
M6 machine tap for through holes – HSSE-PM FAN with long shank and TiCN coating
The FAN M6 machine tap for through holes, made of HSSE-PM powder metallurgy steel with a TiCN coating and a long shank to DIN 376, is designed for the most demanding applications in high-volume production. Powder metallurgy technology ensures a uniform microstructure and a hardness of 67-69 HRC, while the long shank guarantees minimal tool runout. The TiCN coating with a hardness of 3000 HV reduces friction and increases resistance to abrasive wear.
Technical data for the M6 HSSE-PM FAN machine tap with long shank
- HSSE-PM powder metallurgy steel with a uniform microstructure ensures a hardness of 67-69 HRC and 2-3 times the service life of conventional HSSE taps
- TiCN coating with a hardness of 3000 HV reduces friction, prevents built-up edge, and extends tool life by 50-100% in materials prone to adhesion
- Long shank to DIN 376 ensures greater clamping rigidity and minimal runout, which is critical in high-volume production
- As a premium manufacturer, FAN guarantees the highest manufacturing quality and consistent performance in high-volume production
- Optimal geometry for difficult-to-machine materials, austenitic stainless steels, and titanium alloys
- The 6H tolerance in accordance with DIN 376 ensures thread accuracy and full interchangeability with fasteners
The M6 HSSE-PM FAN machine tap with long shank is used on automated tapping lines in high-volume automotive, aerospace, and medical production. The combination of powder metallurgy steel, TiCN coating, and long shank ensures maximum productivity and repeatability. A coolant emulsion with EP additives at a concentration of 8-10% is recommended.
| Material | Cutting speed Vc [m/min] | Spindle speed n [rpm] | Feed f [mm/min] |
|---|---|---|---|
| PSteel | 5-20 | 265-1061 | 265-1061 |
| MStainless steel | 5-10 | 265-531 | 265-531 |
| KCast iron | 5-15 | 265-796 | 265-796 |
| NAluminum | 10-25 | 531-1326 | 531-1326 |
Thread preparation M6 in a through hole
1 Spot drilling
NC spotting drill 90°
2 Drilling
Ø 5 mm
3 Tapping
M6
✓ Done!
Tolerance 6H
Standard: DIN 376 | Chamfer: B (straight) | Application: through holes
Tolerance 6H — metric thread tolerance classes
| Class | Accuracy | Application | Status |
|---|---|---|---|
| 4H / 4g | High | Precision connections, hydraulics | — |
| 6H / 6g | Standard | Machine building, general-purpose | SELECTED |
| 7H / 8g | Low | Large clearance, easy assembly | — |
6H = internal thread (nut, hole) | 6g = external thread (screw)
Frequently asked questions
Combining HSSE-PM powder metallurgy steel with a DIN 376 long shank ensures maximum rigidity, minimal runout, and the longest tool life — an ideal solution for automated tapping lines.
The M6 HSSE-PM DIN 376 tap with TiCN coating is ideal for stainless steels, titanium alloys, nickel superalloys, and other difficult-to-machine materials requiring deep tapping.
The TiCN coating with a hardness of 3000 HV reduces friction, prevents built-up edge, increases wear resistance, and extends tool life by 50-100% in materials prone to adhesion.
Product accessories
Fanar's M6 HSSE INOX 6g DIN 22 568 tooling
Reference: 0000007078 In stock < 10 items
€11.84
€14.57 brutto
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.