• 98% satisfied customers
  • 72h delivery
  • 30 dni na zwrot
Machine reamer fi 17 H7 NRTc DIN 208 HSSE
search
  • Machine reamer fi 17 H7 NRTc DIN 208 HSSE
  • Machine reamer fi 17 H7 NRTc DIN 208 HSSE - nr. 1
Artykuły Techniczne

Machine reamer fi 17 H7 NRTc DIN 208 HSSE

Artykuły Techniczne Artykuły Techniczne
1200
€22.66 tax inc.

Net price: €18.42

Instant Shipping
W magazynie: 10-100 szt.
W magazynie: 10-100 szt.

Instant Shipping

Call and order: (44) 755-04-05

Description

Diameter D Ø17 mm
Tolerance H717.000–17.018 mm
Morse taper MT2
Material HSS

Taper shank machine reamer Ø17 H7 for metal — technical data

NRTc — shank-type finishing reamer, Morse taper shank, HSS DIN 208

Technical Data
Cutting diameter D Ø17 H7 (17.000–17.018 mm)
Morse taper MT2
Flute length l 54 mm
Overall length L 214 mm
Number of teeth Z 8
Type NRTc — shank-type finishing reamer, Morse taper shank
Dimensional standard DIN 208
Material HSS (high-speed steel)
Morse taper shank machine reamer Ø17 H7 for metal NRTc DIN 208 HSS — finishing reamer for holes to H7 tolerance

What H7 tolerance means for a diameter of 17 mm

ClassDeviations [mm]Dimension [mm] 
H6 +0.011 / 0 17.000 – 17.011
H7 +0.018 / 0 17.000 – 17.018 SELECTED
H8 +0.027 / 0 17.000 – 17.027
H9 +0.043 / 0 17.000 – 17.043

The reamed hole falls within the tolerance zone 17.000–17.018 mm (ISO 286-2) — an accuracy level typical of dowel pin holes and sliding fits, among other applications.

Cutting data for the machine reamer Ø17 H7

Indicative values Ø17 mm Z = 8

Material group (ISO 513)Vc [m/min]fz [mm/tooth]n [rpm] Ø17f [mm/min] Z=8
PStructural and carbon steel 8–10 0.16–0.20 150 192
MStainless steel 2–3 0.16–0.20 37 47
KCast iron 3–5 0.16–0.20 56 72
NAluminum and light alloys 12–16 0.20–0.24 225 360

Vc — cutting speed, fz — feed per tooth (catalog values for HSS, selected for a diameter of Ø17 mm). Spindle speeds were calculated for the lower end of the range: n = (Vc × 1000) ÷ (π × D), feed rate per minute f = fz × Z × n for Z = 8. Start with the lower values and adjust according to the material and clamping rigidity. For an HSS reamer, the cutting parameters can be increased by approx. 25% compared with HSS.

You may also need: Cutting parameters calculator

Applications of the machine reamer Ø17 H7 for metal

Hole finishing to H7 tolerance

Machine reamer Ø17 H7 for metal with a taper shank Morse MT2 — NRTc shank-type finishing reamer according to DIN 208 made of high-speed steel (HSS) HSS (approx. 5% Co). The taper shank provides secure, concentric mounting directly in the spindle socket or in a reduction sleeve — from lathes and milling machines to CNC machining centers. The tool has a ~45° lead-in chamfer at the tip for centered entry, while the guiding margins on the cutting edges keep the tool aligned with the hole axis.

The Morse taper shank reamer Ø17 H7 for metal removes the allowance left after drilling and brings the hole to its final size within the tolerance zone H7 (17.000–17.018 mm). Reaming straightens the hole axis, improves roundness and cylindricity, and reduces surface roughness to approx. Ra 0.4–1.6 µm. 8 unequally spaced cutting edges reduce vibration and machining marks. This diameter range is commonly used for sliding fits: pins, shafts, plain bushings, and dowel pin holes in housings. Suitable for reaming steel, cast iron, and nonferrous metals — HSS retains its hot hardness longer than standard HSS and performs more reliably in stainless steel.

Workpiece materials

✓Structural and carbon steel
✓Gray cast iron
✓Aluminum and nonferrous alloys
▲Stainless steels — HSS handles them significantly better than HSS; coolant is still recommended
✗Hardened steels above 45 HRC

Guidelines for correct reaming

  • Pre-drilled hole Ø16.75 mm — stock allowance of 0.25 mm on the diameter.
  • Drill the initial hole perpendicular to the surface and with minimal runout — a finishing reamer follows the existing hole and will not correct its misalignment.
  • Use coolant (emulsion or cutting oil); cast iron can be machined dry.
  • Withdraw the tool without reversing its rotation — reverse rotation damages the cutting edges.

Frequently asked questions — Ø17 H7 reamer

Drill a hole Ø16.75 mm — stock allowance of approx. 0.25 mm on the diameter. Too little allowance causes the material to be compressed rather than cut; too much overloads the cutting edges and reduces hole accuracy.

Use a Morse taper reduction sleeve — it allows the reamer to be mounted in a socket with a larger taper number without losing mounting concentricity.

The hole falls within the tolerance zone 17.000–17.018 mm, and surface roughness is approx. Ra 0.4–1.6 µm — this accuracy is sufficient for sliding fits and dowel pin holes.

Product accessories

Reviews

No customer reviews for the moment.

Add a review about the product

Machine reamer fi 17 H7 NRTc DIN 208 HSSE

Machine reamer fi 17 H7 NRTc DIN 208 HSSE

Shipping

All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE

Courier GLS Przelew24 / Prepayment 14,76 zł gross Delivery time 1 working day
Courier GLS Cash on delivery 17,26 zł gross Lead time 1 working day

This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.

More information