Deutsch 
- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Description
Technical data of the M26x2 manual threader
| Technical data | |
|---|---|
| Nominal diameter d1 mm | M26 |
| Thread pitch P mm | 2 mm |
| Overall length l1 | 90 mm |
| Length of working part l2 | 22 mm |
| Diameter of shank part d2 | 18 mm |
| Size of square drive a | 14.5 mm |
| Threaded bore diameter | 24 mm |
| Thread angle G | 60 degrees |
| Thread standard | ISO DIN 13 |
| Thread tolerance | ISO2 6H |
M26x2 fine thread hand taps
Hand Tap M26x2 DIN 2181/2 6H HSS is used in workshop machining and assembly for making fine-coil metric threads; maintains alignment of guidance, 60-degree profile and 6H hole class in structural steels and cast iron.
Geometric profile and design: size M26, pitch P=2; right-hand direction; HSS in design, ground finish; straight grooves for controlled chip evacuation; stepped nut; cylindrical shank with square driver; recommended 24.0 mm drill bit for proper profile filling and stable guidance even in blind holes.
- Compatibility of fits - the 6H hole interacts with the 6g, maintaining nominal clearance and a clean joint outline.
- Consistency of operation - a two-step run allows the full profile of the thread to be brought out safely, maintaining axial guidance; this particularly facilitates the M26x2 Hand Tapping Set.
- Load control - the graded nut and entry chamfer reduce torsional torque, stabilizing the starting zone.
- Surface finish - ground micro-geometry and straight grooves reduce burrs and promote low roughness.
References and grades: manufacture specifies DIN 2181/2; metric 60-degree outline according to ISO 68-1; series and pitch according to ISO 261/262; tolerances according to ISO 965 - bore 6H. Set Taps manual M26x2 DIN 2181/2 6H HSS guarantees repeatable coil geometry and stable results in precision assembly and unit machining.
M26x2 thread cutting stages in 2-piece set: ripper and finisher
Frequently asked questions
1. What does the M26x2 set include?
The set consists of two thread cutters - a peeler and a finisher, which, when used consecutively, guarantee full thread formation.
2. What materials is the M26x2 tapping tool designed for?
The HSS tool works well for low-carbon steel, aluminum, brass and other materials with good machinability.
3. What are the advantages of being made of HSS?
HSS high-speed steel provides high durability, wear resistance and stable operation even in demanding conditions.
Product accessories
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
Viewed products
