Deutsch 
- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Description
Technical data of the M25x2 manual threader
| Technical data | |
|---|---|
| Nominal diameter d1 mm | M25 |
| Thread pitch P mm | 2 mm |
| Overall length l1 | 120 mm |
| Length of working part l2 | 35 mm |
| Diameter of shank part d2 | 18 mm |
| Size of square drive a | 14 mm |
| Threaded bore diameter | 23 mm |
| Thread angle G | 60 degrees |
| Thread standard | ISO DIN 13 |
| Thread tolerance | ISO2 6H |
M25x2 fine thread hand taps
Hand Tap M25X2 DIN 2181/2 6H HSS designed for manual cutting of metric fine-coil threads; maintains 60-degree profile, guiding alignment and repeatable 6H grade hole fit in structural steels and cast iron.
Geometric characteristics: size M25, pitch P=2; right-hand direction; HSS high-speed steel in ground finish; straight grooves for uniform chip formation; stepped nut; cylindrical shank with square driver for knob cooperation; recommended 23.0 mm drill bit for proper profile filling and stable guidance in manual mode.
- Load control - Graduated nut and mild chamfer reduce torsional torque, stabilizing the entry zone.
- Fitting accuracy - Grade 6H is compatible with 6g, which maintains nominal clearance and a clean joint outline.
- Surface quality - Ground micro-geometry and straight grooves reduce burrs and promote low roughness.
- Efficient Profile Reach - In stage work, Set Taps M25x2 hand taps work in conjunction with other runs, maintaining alignment all the way to the full profile.
The M25x2 DIN 2181/2 6H HSShand tapping set guarantees repeatable coil geometry and predictable results in precision assembly and unit machining. Standards basis: DIN 2181/2 (execution), ISO 68-1 (60-degree outline), ISO 261/262 (series and pitch), ISO 965 - 6H hole.
M25x2 thread cutting stages in 2-piece set: ripper and finisher
Frequently asked questions
1. What does the M25x2 set include?
The set consists of two thread cutters - a peeler and a finisher, which, when used consecutively, guarantee full thread formation.
2. What materials is the M25x2 tapping tool designed for?
The HSS tool works well for low-carbon steel, aluminum, brass and other materials with good machinability.
3. What are the advantages of being made of HSS?
HSS high-speed steel provides high durability, wear resistance and stable operation even in demanding conditions.
Product accessories
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
Viewed products
