Deutsch 
- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Description
Technical data of the M27x1 manual threader
| Technical data | |
|---|---|
| Nominal diameter d1 mm | M27 |
| Thread pitch P mm | 1 mm |
| Overall length l1 | 127 mm |
| Length of working part l2 | 37 mm |
| Diameter of shank part d2 | 20 mm |
| Size of square drive a | 16 mm |
| Threaded bore diameter | 26 mm |
| Thread angle G | 60 degrees |
| Thread standard | ISO DIN 13 |
| Thread tolerance | ISO2 6H |
M27x1 hand taps for stainless steel
Hand Tap M27X1 ISO 529/2 6H HSS is used for precision production of fine metric threads in structural steels and cast iron; the set ensures the maintenance of alignment of guidance and a clean 60-degree profile in workshop and assembly work.
Profile and design: size M27, pitch P=1; right-hand direction; HSS high-speed steel, ground finish; straight grooves for controlled chip evacuation; stepped nut; cylindrical shank with square driver; recommended 26.0 mm drill bit for proper profile filling and stable alignment, even in blind holes.
- Process organization. In step work, a set of M27x1 hand taps facilitates the transition from chipping to finishing without loss of alignment.
- Repeatable fit. The 6H hole mates with the 6g male thread, maintaining nominal clearance and dimensional conformity of the joint.
- Load control. Graduated nut and entry chamfer reduce torsional torque and stabilize the starting zone.
- Surface quality. Ground microgeometry and straight grooves reduce burring, promoting low coil roughness.
Reference standards: dimensions and design to ISO 529/2; metric 60-degree outline to ISO 68-1; series and pitch specified in ISO 261/262; tolerances for internal threads to ISO 965 - Class 6H. Set Taps m27x1 ISO 529/2 6H HSS hand tools guarantee repeatable coil geometry and stable results in precision assembly and unit machining.
M27x1 thread cutting stages in 2-piece set: ripper and finisher
Frequently asked questions
1. What does the M27x1 set include?
The set consists of two thread cutters - a peeler and a finisher, which, when used in succession, guarantee full thread formation.
2. What are the advantages of being made of HSS?
HSS high-speed steel provides high durability, wear resistance and stable operation even in demanding conditions.
3.How to work with the peeler/finisher split?
Ripper: enter smoothly with reversing every 1-2 revolutions for chip breaking. Finisher: finish machining to full depth.
Product accessories
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
Viewed products
