Deutsch 
- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Description
Technical data of M26x1.5 hand tapping machine
| Technical data | |
|---|---|
| Nominal diameter d1 mm | M26 |
| Thread pitch P mm | 1,5 mm |
| Overall length l1 | 90 mm |
| Length of working part l2 | 22 mm |
| Diameter of the shank part d2 | 18 mm |
| Size of square drive a | 14.5 mm |
| Threaded bore diameter | 24.5 mm |
| Thread angle G | 60 degrees |
| Thread standard | ISO DIN 13 |
| Thread tolerance | ISO2 6H |
M26x1.5 fine thread hand taps
Hand Tap M26x1.5 DIN 2181/2 6H HSS is designed for cutting M26 metric fine-coil threads with a pitch of one and a half millimeters in structural steels and metal alloys with a strength of up to eight hundred mega pascals. The two-part design - an introduction part (I) and a finishing part (II) - distributes torsional loads, stabilizes the machining process and facilitates the maintenance of a six H class fit.
Performance data: nominal diameter twenty-six millimeters; pitch one and a half millimeters; profile sixty degrees to ISO 68-1; bore tolerance 6H to ISO 965; right-hand thread; straight chip grooves for controlled evacuation. Made of HSS high-speed steel, in a precision grind, reduces micro chipping and stabilizes edge sharpness. The layout complies with DIN 2181/2, and the order of work and clarity of selection supports Set Taps Manual M26x1.5. Recommended drill under thread: twenty-four and a half millimeter; the use of emulsion or active oil improves surface finish and increases blade life.
- Process stability - separation into two stages reduces torque pulsations and improves profile uniformity.
- Edge resilience - HSS ground high-speed steel slows wear and maintains working sharpness.
- Precise fit - Class 6H tolerance allows positive verification with "pass/fail" checks.
- Consistency of work - sequential workflow and repeatability of results supports the M26x1.5 Hand Thread Set.
Reference to DIN 2181/2, ISO 68-1 and ISO 965 standards guarantees full compatibility with inspection instruments. As a result, the threads maintain a stable profile and predictable parameters in unit and short-run production.
Thread cutting stages for M26x1.5 threads in a 2-piece set: ripper and finisher
Frequently asked questions
1. What does the M26x1.5 set include?
The set consists of two thread cutters - a peeler and a finisher, which, when used consecutively, guarantee full thread formation.
2. Is the M26x1.5 DIN 2181 thread cutter suitable for blind holes?
Yes, the set can be used for both through-holes and blind holes, according to DIN 2181 and class 6H.
3. What are the advantages of being made of HSS?
HSS high-speed steel provides high durability, wear resistance and stable operation even under demanding conditions.
Product accessories
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
Viewed products
