Deutsch 
- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Description
Technical specifications of the M26x1 manual threader
| Technical data | |
|---|---|
| Nominal diameter d1 mm | M26 |
| Thread pitch P mm | 1 mm |
| Overall length l1 | 90 mm |
| Length of working part l2 | 22 mm |
| Diameter of shank part d2 | 18 mm |
| Size of square drive a | 14.5 mm |
| Threaded bore diameter | 25 mm |
| Thread angle G | 60 degrees |
| Thread standard | ISO DIN 13 |
| Thread tolerance | ISO2 6H |
M26x1 fine thread hand taps
Hand Tap M26X1 DIN 2181/2 6H HSS designed for making fine-twist metric threads in structural steels and cast iron; for M26x1 size, it maintains 60-degree profile, guiding alignment and repeatable 6H class hole fit in workshop and assembly work.
Geometric and performance data: size M26, pitch P=1; right-hand direction; HSS high-speed steel in Varel, ground finish; straight grooves for controlled chip evacuation; stepped nut; cylindrical shank with square drive; recommended drill 25.0 mm, which promotes proper profile filling and stable alignment even in blind holes. In workshop practice, the precision and orderliness of work is facilitated by the M26x1 Hand Tapping Set.
- Load control. Graduated nut and entry chamfer reduce torsional torque and stabilize the starting zone.
- Precision fit. The 6H hole mates with the 6g, maintaining nominal clearance and a clean joint outline.
- Surface quality. Ground microgeometry and straight grooves reduce burring, supporting low coil roughness.
- Consistency of runs. In staged work, a two- or three-piece set speeds up reaching the full profile without losing alignment.
Range of standards: DIN 2181/2 (execution), ISO 68-1 (60-degree outline), ISO 261/262 (series and pitch), ISO 965 - Class 6H for internal threads. Set Taps manual M26x1 DIN 2181/2 6H HSS provides repeatable coil geometry and stable results in unit machining and precision assembly.
M26x1 thread cutting stages in 2-piece set: ripper and finisher
Frequently asked questions
1. How many parts does the M26x1 set consist of?
The set includes two thread cutters: a ripper and a finisher, which are used in stages.
2. Is the M26x1 DIN 2181 threader suitable for blind holes?
Yes, the set can be used in through-holes and blind holes.
3. What materials can be threaded with the M26x1 tool?
The threader works well in low-carbon steel, aluminum, brass and other materials with good machinability.
Product accessories
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
Viewed products
