Description
| Technical data | |
|---|---|
| Side length l | 11 mm |
| Insert thickness s | 3.18 mm |
| Hole diameter d1 | 2.8 mm |
| Corner radius rε | 0.4 mm |
| ANSI code | VCMT 221 |

precision machining, medium machining, and roughing — ISO group K
| Material | Finishing | Semi-finishing | Roughing | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Vc [m/min] | f [mm/rev] | ap [mm] | Vc [m/min] | f [mm/rev] | ap [mm] | Vc [m/min] | f [mm/rev] | ap [mm] | |
| KGray cast iron | 200–350 | 0.05 | 0.10 | 150–250 | 0.10 | 0.30 | 120–200 | 0.20 | 1.50 |
| KDuctile cast iron | 180–280 | 0.05 | 0.10 | 130–220 | 0.10 | 0.30 | 100–180 | 0.20 | 1.50 |
single-sided 35° diamond with CVD coating for cast iron
The VCMT 110304 turning insert is a single-sided, diamond-shaped indexable insert made of grade H5115 cemented carbide, designed for precision turning and boring of iron castings. Shape V, a diamond with an acute 35° corner angle, facilitates profile turning and access to complex workpiece contours. Positive geometry with a 7° clearance angle reduces cutting forces and supports single-sided use — with two cutting edges. The nose radius rε of 0.4 mm and CVD coating provide a smooth surface and wear resistance when turning gray and ductile cast iron.
The VCMT 110304 insert is suitable for finish turning bushings, pulleys, bodies, and housings made of gray and ductile cast iron. The acute 35° corner angle allows the tool to follow tapers and profiles without tool holder interference with the material. The CVD coating dissipates heat from the cutting zone and extends cutting edge life at speeds up to approximately 400 m/min. Due to its single-sided design and countersunk hole, the insert is screw-clamped in tool holders with a V11 diamond pocket.
Calculate spindle speed using n = 1000·Vc/(π·D): for a shaft diameter of 50 mm at Vc = 250 m/min, the result is approximately 1592 rpm. For ductile cast iron, maintain a cutting speed of 100–280 m/min and a feed of 0.05–0.20 mm/rev to limit edge chipping at the casting skin. The insert designation is also written without spaces as vcmt110304. Indexable inserts in grade H5115 are supplied by the Korean brand Horn.
Tolerance class M ensures repeatable corner positioning after indexing the insert, while the single-sided chip breaker controls the short, brittle chips typical of cast iron. Once both corners are worn, the entire insert is replaced — edge reconditioning is not intended.
An acute 35° diamond with a radius of rε 0.4 mm is a finishing geometry — the weak corner is unsuitable for roughing or interrupted cutting. For rough turning cast iron, choose an insert with a stronger corner angle, such as a 90° square (type S) or a 80° diamond (type C).
how to read the VCMT 110304 code — designation positions 1–7
Designation VCMT 110304 according to the standard ISO 1832: 4 letters describe geometry and construction, 3 numeric codes describe dimensions. Each field has a number, an icon, and a brief description.
ISO 1832 designation decoder — how to read the code
Positions 1–4 · ISO code
1VShape
35° rhombus
2 corners of 35° per side
2CClearance angle
α = 7°
positive, single-sided
3MTolerance
Class M (intermediate)
IC ±0.05 · thickness ±0.13 mm
4TType
Countersunk hole + chip breaker
countersink 40–60°, single-sided chip breaker
Positions 5–7 · dimensions [mm]
511Size
l = 11 mm
IC = 6.35 mm · 1/4″
603Thickness
s = 3.18 mm
between rake faces
704Corner radius
rε = 0.4 mm
code ÷ 10 → radius in mm
✓ 2 corners × 1 side = 2 cutting edges
tool holders with a V-shaped diamond pocket (IC 6.35 mm) — external turning and boring
use, turning tool selection, and cutting data for turning cast iron
Two — the 35° diamond has 2 acute corners, while the positive, single-sided geometry (letter C, 7° clearance angle) uses only one side of the insert. Once both corners are worn, the entire insert is replaced, as the other side has no cutting edge.
Tool holders with a V-shaped diamond pocket for size 11 (IC 6.35 mm): for external turning SVJCR/L and SVHCR/L and neutral SVVCN with shank cross sections of 16×16 and 20×20 mm; for boring, boring bars S16P and S20R with an SVUCR/L or SVQCR/L head. The insert is clamped with a screw through the countersunk hole.
Mainly in the nose radius rε. The version 0.4 mm from the VCMT 1103 family is used for finishing at low feeds and provides low surface roughness. An insert with a larger radius, e.g. rε 0.8 mm, has a stronger corner and withstands higher feeds, but leaves slightly coarser machining marks. The other dimensions (IC 6.35 mm, thickness 3.18 mm) are identical.
Grade H5115 with a CVD coating is optimized for cast iron in group ISO K — gray, ductile, and malleable cast iron. For turning steel or stainless steel, choose an insert in a grade suited to group P or M. The acute 35° diamond performs best in finishing operations, not roughing.
No customer reviews for the moment.
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Użyj strzałek, aby zmieniać zdjęcia. Powiększaj przyciskami albo gestem szczypania. Zamknij galerię klawiszem Escape.
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.