• 98% satisfied customers
  • 72h delivery
  • 30 dni na zwrot
Carbide insert TPUN 220412 H6510 Horn - Turning inserts
search
  • Carbide insert TPUN 220412 H6510 Horn - Turning inserts
  • Carbide insert TPUN 220412 H6510 Horn - Turning inserts - nr. 1
Horn

Carbide insert TPUN 220412 H6510 Horn

Horn Horn
596350
Cutting edge length: 222 sizes of this insert
€8.42 tax inc.

Net price: €6.84

Instant Shipping
W magazynie: +100 szt.
W magazynie: +100 szt.

Instant Shipping

Call and order: (44) 755-04-05

Description

TPUN 220412 turning insert – indexable 60° triangle

Technical data
Side length l 22 mm
Inscribed circle diameter IC 12.7 mm
Insert thickness s 4.76 mm
Corner radius rε 1.2 mm
ANSI code TPUN 433
TPUN 220412 indexable turning insert made of H6510 cemented carbide, single-sided positive 60° triangle without a hole or chip breaker

Cutting data for the TPUN insert for steel and stainless steel

finishing, semi-finishing and roughing — ISO P and M groups

MaterialFinishingSemi-finishingRoughing
Vc [m/min]Feed f [mm/rev]ap [mm]Vc [m/min]Feed f [mm/rev]ap [mm]Vc [m/min]Feed f [mm/rev]ap [mm]
PSteel 200-295 0.2 1.5 170-240 0.35 4.5 150-215 0.5 7
MStainless steel 110-230 0.2 1.5 70-175 0.35 4.5 50-135 0.5 7

H6510 carbide indexable insert – applications and construction

single-sided positive 60° triangle without a hole or chip breaker

The TPUN 220412 turning insert is a single-sided, triangular indexable insert made of grade H6510 cemented carbide, designed for turning steel and stainless steel. The T shape denotes an equilateral triangle with a 60° corner angle, which facilitates access to the workpiece contour during longitudinal turning and facing. Positive geometry with a 11° clearance angle (letter P) reduces cutting resistance, making the insert suitable for slender workpieces and less rigid machine tools. The letter N in the designation indicates a design without a hole or chip breaker — the insert is secured by a top clamp, and each of the three corners provides one cutting edge. The nose radius rε of 1.2 mm makes the insert suited to roughing at higher feeds.

Key advantages of the H6510 cemented carbide insert

  • Three cutting edges — 3 corners of 60° each on one side of the single-sided insert; once a corner is worn, simply index the insert in the pocket without changing the tool holder.
  • Positive 11° geometry — the letter P indicates lower cutting forces and reduced power requirements, beneficial for thin shafts and boring.
  • Corner radius rε 1.2 mm — makes the insert suited to roughing at feeds up to 0.5 mm/rev and depths of cut up to 7 mm.
  • Type N design without a hole or chip breaker — a flat rake face, top clamp mounting, and easy replacement in tool holders for clamped inserts.
  • Grade H6510 for ISO groups P and M — PVD-coated carbide for structural steel and stainless steel, and occasionally cast iron.
  • Dimensions according to ISO 1832: edge length 22 mm, IC 12.7 mm (1/2″), thickness 4.76 mm — for tool holders with a triangular insert pocket.

Applications and parameter selection for the triangular insert

The TPUN 220412 insert (also written without a space as tpun220412) is suitable for roughing and semi-finishing shafts, bushings, and forgings made of structural steels and stainless steel. Calculate spindle speed using the formula n = 1000·Vc/(π·D): for a shaft with a diameter of 50 mm at Vc = 200 m/min, the result is approximately 1273 rpm. The large nose radius of 1.2 mm and thickness of 4.76 mm provide a margin of edge strength, allowing the insert to handle depths of cut up to 7 mm and feeds up to 0.5 mm/rev. When machining stainless steel, maintain a cutting speed of 50–230 m/min and a constant feed to reduce work hardening of the layer being cut.

As a positive insert without a hole, TPUN 220412 is mounted in tool holders with top clamps, typical of indexable turning tools for external turning. The absence of a chip breaker means chip formation depends on the cutting parameters and tool holder geometry rather than the insert itself — with ductile steel, increasing the feed and providing flood coolant is advisable. Grade H6510 belongs to the same family as H6310, covers ISO material groups P and M, and handles both structural steel and stainless steel. Indexable inserts in grade H6510 are supplied by the Korean brand Horn.

▲
Limitation: no chip breaker

TPUN inserts have a design of type N — flat, without a chip breaker groove. When turning ductile stainless steel, the insert geometry does not break the chips; control them through feed, tool holder entering angle, and flood coolant, or choose an insert with a chip breaker, such as type TNMG.

Triangular insert designation decoder according to ISO 1832

how to read the TPUN 220412 code — designation positions 1–7

Designation TPUN 220412 according to the standard ISO 1832: 4 letters describe geometry and construction, 3 numeric codes describe dimensions. Each field has a number, an icon, and a brief description.

ISO 1832 designation decoder — how to read the code

1Tshape 2Pangle α 3Utolerance 4Ntype – 522size 604thickness 712radius rε

Positions 1–4 · ISO code

1TShape

60° triangle

3 corners of 60° per side

2PClearance angle

α = 11°

positive, single-sided

3UTolerance

Class U (wide)

IC ±0.08–0.25 · thickness ±0.13 mm

4NType

Without hole or chip breaker

top-clamp mounting

Positions 5–7 · dimensions [mm]

522Size

l = 22 mm

IC = 12.7 mm · 1/2″

604Thickness

s = 4.76 mm

between rake faces

712Corner radius

rε = 1.2 mm

code ÷ 10 → radius in mm

✓ 3 corners × 1 side = 3 cutting edges

Full designation: TPUN 220412 = 60° triangle · 11° positive · class U · without a hole or chip breaker · IC 12.7 mm (l 22 mm) · s 4.76 mm · rε 1.2 mm

Frequently asked questions about the TPUN 220412 insert

number of cutting edges, type N design, and turning parameters

Three — the triangle has 3 corners of 60° each, and the single-sided, positive design allows only one rake face to be used. Once a corner is worn, index the insert in the pocket to bring the next cutting edge into position without changing the tool holder.

The letter N indicates an insert without a mounting hole or chip breaker groove. It is secured by a top clamp, and chip formation is determined by the tool holder geometry and selected cutting parameters — not by the insert itself. With ductile steel, increasing the feed and providing flood coolant is advisable.

Only in corner radius: 0.4 mm is used for finishing at low feed rates, 0.8 mm is the general-purpose version, and 1.2 mm (our version) is selected for roughing at feeds up to 0.5 mm/rev. The remaining dimensions (IC 12.7 mm, thickness 4.76 mm) are identical.

Yes — grade H6510 covers groups ISO P and M, meaning structural steel and stainless steel. Maintain a cutting speed of 50–230 m/min, a constant feed, and continuous emulsion cooling: austenitic steel conducts heat poorly and work-hardens when cutting is too slow.

Product accessories

Reviews

No customer reviews for the moment.

Add a review about the product

Carbide insert TPUN 220412 H6510 Horn

Carbide insert TPUN 220412 H6510 Horn

Shipping

All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE

Courier GLS Przelew24 / Prepayment 14,76 zł gross Delivery time 1 working day
Courier GLS Cash on delivery 17,26 zł gross Lead time 1 working day

This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.

More information