Description
| Technical data | |
|---|---|
| Side length l | 16.5 mm |
| Insert thickness s | 4.76 mm |
| Hole diameter d1 | 4.4 mm |
| Corner radius rε | 0.4 mm |
| ANSI code | VBMT 331 |

finishing and semi-finishing — ISO P and M groups
| Material | Finishing | Semi-finishing | Roughing | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Vc [m/min] | Feed f [mm/rev] | ap [mm] | Vc [m/min] | Feed f [mm/rev] | ap [mm] | Vc [m/min] | Feed f [mm/rev] | ap [mm] | |
| PSteel | 200-295 | 0.05 | 0.1 | 170-240 | 0.1 | 0.32 | 150-215 | 0.2 | 1.8 |
| MStainless steel | 110-230 | 0.05 | 0.1 | 70-175 | 0.1 | 0.32 | 50-135 | 0.2 | 1.8 |
single-sided 35° diamond with a hole and chip breaker
The VBMT 160404 turning insert is a single-sided, rhombic indexable insert made of grade H6310 cemented carbide, designed for turning steel and stainless steel. The V shape, a rhombus with an acute corner angle of 35°, facilitates profile turning and machining of complex contours without interference between the holder and the workpiece. Positive geometry with a 5° clearance angle reduces cutting forces and performs well when finishing slender shafts. The insert uses one side, providing two cutting edges at the 35° corners. The countersunk hole secures the insert with a central screw, while the single-sided chip breaker controls chip flow and breaking during longitudinal turning. The nose radius rε of 0.4 mm ensures low surface roughness at low feed rates of around 0.05–0.1 mm/rev.
The VBMT 160404 insert (also written without spaces as vbmt160404) performs well when finishing shafts, bushings, and contours made of structural steels, as well as stainless steel components. The acute corner angle allows machining of undercuts and profiles that a rhombic insert with a 55° or 80° corner angle cannot reach. Calculate spindle speed using n = 1000·Vc/(π·D): for a shaft diameter of 40 mm at Vc = 250 m/min, the result is approximately 1989 rpm. For stainless steel, maintain a cutting speed of 110–230 m/min and a constant feed rate to limit work hardening of the layer being cut. Use the shortest possible holder and boring bar overhang, as the slender indexable insert is susceptible to vibration. For carbon and alloy steels, use the Vc range of 200–295 m/min with liquid coolant to reduce built-up edge and extend edge life. Grade H6310 cemented carbide inserts are supplied by the Korean brand Horn.
Grade H6310 is not intended for steels hardened above 45 HRC — for hard turning, choose a version with a cubic boron nitride cutting edge (CBN). The acute corner angle of 35° is sensitive to roughing loads, so reserve the insert for finishing and light semi-finishing.
how to read the VBMT 160404 code — positions 1–7 of the designation
Designation VBMT 160404 according to the standard ISO 1832: 4 letters describe geometry and construction, 3 numeric codes describe dimensions. Each field has a number, an icon, and a brief description.
holders with a 16 rhombic insert pocket (V shape) — external and internal turning
use, turning tool selection, and turning parameters
Two — the rhombus has two acute corners, each measuring 35°, and the positive, single-sided geometry (letter B, 5° clearance angle) allows only the top side of the insert to be used. Once one edge is worn, index the insert in its pocket; the other side cannot be used for cutting.
Holders with a 16 diamond-shaped pocket (IC 9.525 mm): for external turning SVJBR/L and SVHBR/L, neutral SVVBN and SVZBR/L with cross sections of 16×16–32×32 mm; for internal turning, boring bars S25S–S40U with the suffix SVUBR/L, SVQBR/L, or SVXBR/L. The letters R and L indicate right-hand and left-hand versions.
Only in corner radius: 0.4 mm (code 04) is a finishing version for low feed rates and low surface roughness, while 0.8 mm (code 08) provides a stronger corner for semi-finishing. The remaining dimensions — IC 9.525 mm, length 16.5 mm, and thickness 4.76 mm — are identical.
Yes — grade H6310 covers group ISO M20-M40. Maintain a cutting speed of 110–230 m/min, a constant feed, and continuous emulsion cooling: austenitic steel conducts heat poorly and work-hardens when cutting is too slow.
Reference: 0000010093 In stock > 10 items
€8.74 brutto
No customer reviews for the moment.
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.