- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Description
Material HSSE-PM
Thread size M10
ChamferB (3.5–5.5) threads
Standard DIN 376
Technical data for the M10 machine tap
| Technical Data | |
|---|---|
| Nominal Diameter d1 | M10 |
| Thread Pitch P | 1.5 mm |
| Overall Length l1 | 100 mm |
| Flute Length l2 | 17 mm |
| Shank Diameter d2 | 7 mm |
| Square Drive Size a | 5.5 mm |
| Tap Drill Diameter | 8.5 mm |
| Chamfer | B (3.5÷5.5) P |
| Thread tolerance | 6H |
How the type B through-hole chamfer pushes chips down the hole
Chips exit at the bottom instead of returning through the thread
The type B through-hole chamfer has a chip breaker at the tip of the tap – an angled notch in the cutting edges. The chip breaker directs chips down the hole, ahead of the tap tip. The chips curl into a spring shape, break into short pieces and exit the hole on the other side of the workpiece. The threads already cut remain clean because the chips do not pass through them on their way up. The M10 x1.5 tap has a reduced shank to DIN 376: diameter 7 mm, square size 5.5 mm.
1
Straight flute – chips do not enter it; the flute carries lubricant to the cutting edges.
2
The chip breaker at the tip of the tap directs chips down the hole.
3
The tap rotates clockwise to cut a right-hand thread.
4
B chamfer: 3.5–5.5 incomplete threads on the entry taper.
5
The chips break into segments: individual pieces at the top of the hole, with progressively more farther down. They fall out below the workpiece.
6
Feed 1.5 mm/rev, equal to the pitch of the M10 x1.5 thread.
M10 machine tap for through holes – HSSE-PM FAN with long shank and TiCN coating
The FAN M10 machine tap for through holes, made from HSSE-PM powder metallurgy steel with a TiCN coating and a long shank according to DIN 376, is designed for the most demanding applications in high-volume production. Powder metallurgy technology provides a uniform microstructure and a hardness of 67-69 HRC, while the long shank ensures minimal tool runout even at high rotational speeds. The TiCN coating with a hardness of 3000 HV reduces friction and increases abrasion resistance in materials prone to adhesion. As a premium manufacturer, FAN ensures the highest manufacturing quality for automated production lines.
Why choose the M10 HSSE-PM FAN TC machine tap
- HSSE-PM powder metallurgy steel with a uniform microstructure, provides a hardness of 67-69 HRC and 2-3 times the tool life of conventional HSSE taps under stable cutting conditions
- TiCN coating with a hardness of 3000 HV, reduces the coefficient of friction, prevents built-up edges and extends tool life by 50-100% in materials prone to adhesion
- Long shank to DIN 376 provides greater clamping rigidity and minimal runout, which is crucial in high-volume production on automated tapping lines
- As a premium manufacturer, FAN ensures the highest manufacturing quality, consistent performance and repeatable geometry in high-volume production on CNC machining centers
- Optimum cutting edge geometry for difficult-to-machine materials, 304/316 austenitic stainless steels, titanium alloys and nickel superalloys requiring special parameters
- The 6H tolerance according to DIN 376 ensures thread accuracy and full interchangeability with fasteners used in the automotive and aerospace industries
The M10 HSSE-PM FAN machine tap with a long shank and TiCN coating is used in high-volume automotive, aerospace and medical manufacturing on automated tapping lines requiring maximum productivity. The combination of powder metallurgy steel, TiCN coating and a long shank ensures the highest tool life and repeatability. Cooling with an emulsion containing EP additives at a concentration of 8-10% is recommended.
| Material | Cutting speed Vc [m/min] | Spindle speed n [rpm] | Feed f [mm/min] |
|---|---|---|---|
| PSteel | 5-20 | 159-637 | 238-956 |
| MStainless steel | 5-10 | 159-318 | 238-477 |
| KCast iron | 5-15 | 159-477 | 238-716 |
| NAluminum | 10-25 | 318-796 | 477-1194 |
Thread preparation M10 in a through hole
1 Spot drilling
NC spotting drill 90°
2 Drilling
Ø 8.5 mm
3 Tapping
M10
✓ Done!
Tolerance 6H
Standard: DIN 376 | Chamfer: B (straight) | Application: through holes
Tolerance 6H — metric thread tolerance classes
| Class | Accuracy | Application | Status |
|---|---|---|---|
| 4H / 4g | High | Precision connections, hydraulics | — |
| 6H / 6g | Standard | Machine building, general-purpose | SELECTED |
| 7H / 8g | Low | Large clearance, easy assembly | — |
6H = internal thread (nut, hole) | 6g = external thread (screw)
Frequently asked questions
Combining HSSE-PM powder metallurgy steel with a TiCN coating provides maximum hardness, a minimal coefficient of friction and the longest tool life — an ideal solution for automated tapping lines.
The M10 HSSE-PM tap with a TiCN coating is ideal for stainless steels, titanium alloys, nickel superalloys and other difficult-to-machine materials requiring deep tapping.
The TiCN coating with a hardness of 3000 HV reduces friction, prevents built-up edge, increases wear resistance, and extends tool life by 50-100% in materials prone to adhesion.
Product accessories
M10 HSSE INOX 6g DIN 22 568 Fanar tooling
Reference: 0000007079 In stock > 10 items
€27.63
€33.99 brutto
Hand tap M10 DIN 352/3 6H HSS Bucovice
Reference: 0000006583 In stock > 10 items
€11.84
€14.57 brutto
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
Viewed products
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.