- 98% satisfied customers
- 72h delivery
- 30 dni na zwrot
Description
Material HSSE-PM
Thread size M5
ChamferB (3.5–5.5) threads
Standard DIN 371
Technical data for the M5 machine tap
| Technical Data | |
|---|---|
| Nominal Diameter d1 | M5 |
| Thread Pitch P | 0.8 mm |
| Overall Length l1 | 70 mm |
| Flute Length l2 | 14 mm |
| Length l3 | 25 mm |
| Shank Diameter d2 | 6 mm |
| Square Drive Size a | 4.9 mm |
| Tap Drill Diameter | 4.2 mm |
| Chamfer | B (3.5÷5.5) P |
| Thread tolerance | 6H |
How the type B through-hole chamfer pushes chips down the hole
Chips exit at the bottom instead of returning through the thread
The form B through-hole chamfer has a chip breaker at the front of the tap – an angled cut in the cutting edges. The chip breaker directs chips down the hole, ahead of the tap tip. The chip curls into a coil, breaks into short pieces, and exits the hole on the other side of the workpiece. Threads already cut remain clean because chips do not pass through them on their way up. The M5 x0.8 tap has a reinforced shank in accordance with DIN 371: diameter 6 mm, square 4.9 mm.
1
Straight flute – chips do not enter it; the flute carries lubricant to the cutting edges.
2
The chip breaker at the tip of the tap directs chips down the hole.
3
The tap rotates clockwise to cut a right-hand thread.
4
B chamfer: 3.5–5.5 incomplete threads on the entry taper.
5
The chips break into segments: individual pieces at the top of the hole, with progressively more farther down. They fall out below the workpiece.
6
Feed 0.8 mm/rev, equal to the pitch of the M5 x0.8 thread.
M5 machine tap for through holes – HSSE-PM FAN with TiCN coating
The FAN M5 machine tap for through holes, made from HSSE-PM powder metallurgy steel with a TiCN coating, is designed for the most demanding high-volume production applications. Powder metallurgy (PM) technology provides a uniform microstructure and a hardness of 67-69 HRC, significantly exceeding the specifications of conventional HSSE taps. The TiCN coating with a hardness of 3000 HV reduces friction and increases abrasive wear resistance. The tool is intended for production lines with the highest requirements.
Technical specifications of the M5 HSSE-PM FAN TC machine tap
- HSSE-PM powder metallurgy steel with a uniform microstructure ensures a hardness of 67-69 HRC and 2-3 times the service life of conventional HSSE taps
- TiCN coating with a hardness of 3000 HV reduces friction, prevents built-up edge, and extends tool life by 50-100% in materials prone to adhesion
- FAN brand as a premium manufacturer, ensures the highest manufacturing quality and consistent performance in high-volume production
- The 6H tolerance in accordance with DIN 371 ensures thread accuracy and full interchangeability with fasteners
- Optimal geometry for difficult-to-machine materials, austenitic stainless steels, and titanium alloys
- Short shank according to DIN 371, compatible with ER11 and ER16 holders and tapping chucks with axial compensation
The M5 HSSE-PM FAN TC machine tap is used in high-volume automotive, aerospace and medical manufacturing, where maximum productivity and repeatability with minimal downtime are required. The TiCN coating is particularly effective when tapping stainless steels. Cooling with an emulsion containing EP additives at a concentration of 8-10% is recommended.
| Material | Cutting speed Vc [m/min] | Spindle speed n [rpm] | Feed f [mm/min] |
|---|---|---|---|
| PSteel | 5-20 | 318-1273 | 254-1018 |
| MStainless steel | 5-10 | 318-637 | 254-510 |
| KCast iron | 5-15 | 318-955 | 254-764 |
| NAluminum | 10-25 | 637-1592 | 510-1274 |
Thread preparation M5 in a through hole
1 Spot drilling
NC spotting drill 90°
2 Drilling
Ø 4.2 mm
3 Tapping
M5
✓ Done!
Tolerance 6H
Standard: DIN 371 | Chamfer: B (straight) | Application: through holes
Tolerance 6H — metric thread tolerance classes
| Class | Accuracy | Application | Status |
|---|---|---|---|
| 4H / 4g | High | Precision connections, hydraulics | — |
| 6H / 6g | Standard | Machine building, general-purpose | SELECTED |
| 7H / 8g | Low | Large clearance, easy assembly | — |
6H = internal thread (nut, hole) | 6g = external thread (screw)
Frequently asked questions
HSSE-PM powder metallurgy steel has a uniform microstructure, a higher hardness of 67-69 HRC and better wear resistance than conventional HSSE. It provides 2-3 times the tool life.
The M5 HSSE-PM tap with a TiCN coating is ideal for austenitic stainless steels, titanium alloys, nickel superalloys and other difficult-to-machine materials and materials prone to adhesion.
The M5 HSSE-PM tap with a TiCN coating achieves 2-3 times the tool life of conventional HSSE taps. It cuts 500-800 threads in stainless steel with proper cooling.
Product accessories
Die M5 HSSE INOX 6g DIN 22 568 Fanar
Reference: 0000007077 In stock < 10 items
€12.89
€15.86 brutto
Reviews
No customer reviews for the moment.
Shipping
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Recommended for you
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.
Cookie preferences
Functional cookiesTechnical
Functional cookies are strictly necessary to provide the services of the shop, as well as for its proper functioning, so it is not possible to refuse their use. They allow the user to browse through our website and use the different options or services that exist on it.
Advertising Cookies
These are cookies that collect information about the advertisements shown to users of the website. They can be anonymous, if they only collect information about the advertising spaces shown without identifying the user, or personalised, if they collect personal information about the user of the shop by a third party, for the personalisation of these advertising spaces.
Analytics cookies
Collect information about the user's browsing experience in the shop, usually anonymously, although sometimes they also allow the user to be uniquely and unequivocally identified in order to obtain reports on the user's interests in the products or services offered by the shop.