• 98% satisfied customers
  • 72h delivery
  • 30 dni na zwrot
Carbide insert CNMG 120408 HS H6310 Horn - Turning inserts
search
  • Carbide insert CNMG 120408 HS H6310 Horn - Turning inserts
  • Carbide insert CNMG 120408 HS H6310 Horn - Turning inserts - nr. 1
Horn

Carbide insert CNMG 120408 HS H5115 Horn

Horn Horn
15232
€7.77 tax inc.

Net price: €6.32

Instant Shipping
W magazynie: 10-100 szt.
W magazynie: 10-100 szt.

Instant Shipping

Call and order: (44) 755-04-05

Description

CNMG 120408 turning insert – indexable 80° diamond

Technical data
Side length l 12.9 mm
Insert thickness s 4.76 mm
Hole diameter d1 5.16 mm
Corner radius rε 0.8 mm
ANSI code CNMG 432
CNMG 120408 indexable turning insert in H5115 cemented carbide, double-sided 80° rhombus with a hole and chip breaker for cast iron

Cutting data for the CNMG insert for cast iron and hardened materials

finishing, semi-finishing, and roughing — ISO groups K and H

MaterialFinishingSemi-finishingRoughing
Vc [m/min]Feed f [mm/rev]ap [mm]Vc [m/min]Feed f [mm/rev]ap [mm]Vc [m/min]Feed f [mm/rev]ap [mm]
KCast iron 240-400 0.1 0.5 155-280 0.25 2.5 120-200 0.4 5
HHardened materials 80-150 0.08 0.2 40-90 0.15 0.8 30-60 0.25 1.5

Grade H5115 cemented carbide indexable insert – applications and construction

double-sided 80° diamond with a hole and chip breaker

The CNMG 120408 turning insert is a double-sided, rhombic indexable insert made of grade H5115 cemented carbide, designed for turning cast iron. The C shape, a rhombus with a 80° corner angle, combines a rigid, strong corner with the ability to perform longitudinal turning and facing using one tool. The negative geometry with a 0° clearance angle allows both sides of the insert to be used — a total of four cutting edges. The nose radius rε of 0.8 mm provides a balance between surface finish and edge strength at feed rates of 0.25–0.4 mm/rev.

Key advantages of the H5115 cemented carbide insert

  • Four cutting edges — 2 corners on each of the two sides reduce the cost per cutting edge compared with single-sided inserts.
  • Grade H5115 with CVD coating — carbide optimized for cast iron (ISO group K): gray, ductile, and malleable cast iron.
  • Corner radius rε 0.8 mm — a general-purpose version combining surface finish with edge strength between roughing and finishing operations.
  • The 80° corner angle provides a strong, rigid corner that withstands loads when turning iron castings.
  • Dimensions according to ISO 1832: cutting edge length 12.9 mm, IC 12.7 mm (1/2″), thickness 4.76 mm — compatible with holders with a 12 diamond pocket.
  • The wear-resistant CVD coating allows cutting speeds of up to approximately 400 m/min when finishing cast iron.

Applications and cutting data selection for the diamond-shaped insert

The CNMG 120408 insert (also written without a space as cnmg120408) is suitable for precision external turning and boring of iron castings — gray, ductile, and malleable cast iron. The wear-resistant CVD coating allows high cutting speeds, reaching approximately 400 m/min when finishing cast iron. Calculate spindle speed using n = 1000·Vc/(π·D): for a shaft with a diameter of 50 mm at Vc = 300 m/min, the result is approximately 1910 rpm. Grade H5115 indexable inserts are supplied by the Korean brand Horn.

The 80° rhombic shape provides a compromise between corner strength and versatility — stronger than a triangle, while allowing longitudinal turning and facing without changing the turning tool. The hole with a chip breaker on both sides (type G according to ISO 1832) controls chip flow and breaking on both sides of the insert. Short, brittle cast iron chips work well with the type G chip breaker, making it easier to evacuate chips from the cutting zone. Tolerance class M ensures repeatable edge positioning after indexing the insert in the holder pocket. When machining more ductile nodular cast iron, maintain a stable feed rate and rigid clamping to reduce corner chipping. Grade H5115 carbide also handles hardened materials at appropriately reduced cutting speeds.

▲
Application limitation

Grade H5115 with a CVD coating is optimized for cast iron and continuous turning. When machining austenitic stainless steel or making heavily interrupted cuts, select a grade dedicated to ISO group M or P — CVD withstands edge impacts less effectively than coatings PVD.

Rhombic insert designation decoder according to ISO 1832

how to read the CNMG 120408 code — positions 1–7 of the designation

Designation CNMG 120408 according to the standard ISO 1832: 4 letters describe geometry and construction, 3 numeric codes describe dimensions. Each field has a number, an icon, and a brief description.

ISO 1832 designation decoder — how to read the code

1Cshape 2Nangle α 3Mtolerance 4Gtype – 512size 604thickness 708radius rε

Positions 1–4 · ISO code

1CShape

80° rhombus

2 corners of 80° per side

2NClearance angle

α = 0°

negative, double-sided

3MTolerance

Class M (intermediate)

IC ±0.08 · thickness ±0.13 mm

4GType

Hole + chip breaker

chip breaker on both sides

Positions 5–7 · dimensions [mm]

512Size

l = 12.9 mm

IC = 12.7 mm · 1/2″

604Thickness

s = 4.76 mm

between rake faces

708Corner radius

rε = 0.8 mm

code ÷ 10 → radius in mm

✓ 2 corners × 2 sides = 4 cutting edges

Full designation: CNMG 120408 = 80° diamond · negative · class M · hole and chip breaker · IC 12.7 mm (l 12.9 mm) · s 4.76 mm · rε 0.8 mm

Compatible turning tools

holders with a 12 diamond-shaped pocket — external and internal turning

TCLNR/L 2020 K1220×20 × 125 mmR right-hand
←
L left-hand
→
TCLNR/L 2525 M1225×25 × 150 mmR right-hand
←
L left-hand
→
PCLNR/L 2020 K1220×20 × 125 mmR right-hand
←
L left-hand
→
PCBNR/L 2020 K1220×20 × 125 mmR right-hand
←
L left-hand
→
PCMNN 2020 K1220×20 × 125 mmR right-hand
←
L left-hand
→
TCMNN 1616 H1216×16 × 100 mmR right-hand
←
L left-hand
→
TCMNN 2020 K1220×20 × 125 mmR right-hand
←
L left-hand
→
TCZNN 2020 K1220×20 × 125 mmR right-hand
←
L left-hand
→
TCBNR/L 2525 M1225×25 × 150 mmR right-hand
←
L left-hand
→
TCKNR/L 2020 K1220×20 × 125 mmR right-hand
←
L left-hand
→
TCKNR/L 2525 M1225×25 × 150 mmR right-hand
←
L left-hand
→
S20R TCLNR/L-12Ø20 | Ømin 25 mm | L=200R right-hand
←
L left-hand
→
S25S TCLNR/L-12Ø25 | Ømin 32 mm | L=250R right-hand
←
L left-hand
→
S32T TCLNR/L-12Ø32 | Ømin 40 mm | L=300R right-hand
←
L left-hand
→
S40U TCLNR/L-12Ø40 | Ømin 50 mm | L=350R right-hand
←
L left-hand
→
S50V TCLNR/L-12Ø50 | Ømin 63 mm | L=400R right-hand
←
L left-hand
→
S25S PCLNR/L-12Ø25 | Ømin 32 mm | L=250R right-hand
←
L left-hand
→
S32T PCLNR/L-12Ø32 | Ømin 40 mm | L=300R right-hand
←
L left-hand
→
S40U PCLNR/L-12Ø40 | Ømin 50 mm | L=350R right-hand
←
L left-hand
→

Frequently asked questions about the CNMG 120408 insert

use, turning tool selection, and turning parameters

Four — the diamond has 2 corners per side, and the negative geometry (0° clearance angle) allows both sides of the insert to be used. Once an edge becomes dull, simply rotate the insert in its pocket without changing the holder.

Holders with a 12 diamond-shaped pocket (IC 12.7 mm): for external turning TCLNR/L and PCLNR/L (entering angle 95°), PCBNR/L and TCKNR/L (75°) and PCMNN, TCMNN and TCZNN with cross sections of 16×16–32×32 mm; for internal turning, boring bars S20R–S50V with a TCLNR/L or PCLNR/L head.

Only in corner radius: 0.4 mm is used for finishing at low feed rates, 0.8 mm is the general-purpose version, and 1.2 mm is selected for roughing at feed rates up to 0.4–0.5 mm/rev. The other dimensions (IC 12.7 mm, thickness 4.76 mm) are identical.

Yes — grade H5115 covers group ISO K: gray, ductile, and malleable cast iron. The CVD coating allows cutting speeds of up to approximately 400 m/min when finishing; maintain a stable feed rate and rigid clamping to reduce corner chipping.

Product accessories

Pin CTM617 Varel

Reference: 0000011972 In stock > 10 items

€1.05

€1.29 brutto

Reviews

No customer reviews for the moment.

Add a review about the product

Carbide insert CNMG 120408 HS H5115 Horn

Carbide insert CNMG 120408 HS H5115 Horn

Shipping

All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE

Courier GLS Przelew24 / Prepayment 14,76 zł gross Delivery time 1 working day
Courier GLS Cash on delivery 17,26 zł gross Lead time 1 working day

This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.

More information