Description
| Technical data | |
|---|---|
| Side length l | 11 mm |
| Insert thickness s | 3.18 mm |
| Hole diameter d1 | 2.8 mm |
| Corner radius rε | 0.4 mm |
| ANSI code | VBMT 221 |
| Inscribed circle diameter IC | 6.35 mm |

finishing, semi-finishing and roughing — ISO P and M groups
| Material | Finishing | Semi-finishing | Roughing | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Vc [m/min] | Feed f [mm/rev] | ap [mm] | Vc [m/min] | Feed f [mm/rev] | ap [mm] | Vc [m/min] | Feed f [mm/rev] | ap [mm] | |
| PSteel | 200-295 | 0.05 | 0.1 | 170-240 | 0.1 | 0.3 | 150-215 | 0.19 | 1.7 |
| MStainless steel | 110-230 | 0.05 | 0.1 | 70-175 | 0.1 | 0.3 | 50-135 | 0.19 | 1.7 |
positive 35° diamond with a hole, countersink, and chip breaker
The VBMT 110304 turning insert is a single-sided, diamond-shaped indexable insert made of grade H6310 cemented carbide, designed for turning steel and stainless steel. The V shape, a diamond with an acute 35° corner angle, facilitates copy turning and profiling complex contours. Positive geometry with a 5° clearance angle (letter B) reduces cutting forces and performs well on slender workpieces prone to deflection. The insert has two working corners on one side, providing two cutting edges. The rε 0.4 mm nose radius provides a smooth surface at the low feeds typical of finishing operations.
The VBMT 110304 insert (also written without a space as vbmt110304) performs well in finishing shafts, journals, and profiled surfaces made of structural steels, as well as stainless steel components. The acute 35° corner allows complex contours to be reproduced without changing tools between passes. The hole and countersink design (type T according to ISO 1832) secures the insert with a screw, while the single-sided chip breaker controls chip flow during turning. PVD-coated grade H6310 covers ISO groups P20-P40 and M20-M40, and also performs well in occasional cast iron applications.
Calculate spindle speed using n = 1000·Vc/(π·D): for a shaft diameter of 40 mm at a cutting speed of Vc = 250 m/min, the result is approximately 1989 rpm. For stainless steels, maintain a speed of 110–230 m/min and a constant feed to reduce work hardening of the layer being cut. For finishing, select a feed close to the nose radius — for rε 0.4 mm, a feed of 0.05–0.1 mm/rev provides a good surface finish. Ensure rigid workpiece and tool clamping, as the slender 35° corner is less resistant to vibration than obtuse corners. Grade H6310 indexable inserts are supplied by the Korean brand Horn.
The acute 35° corner and small radius rε 0.4 mm provide finishing geometry — at a large depth of cut (ap) the corner is prone to chipping. For roughing, select an insert with a larger corner angle (e.g., shape C 80°) and a larger radius.
how to read the VBMT 110304 code — positions 1–7 of the designation
Designation VBMT 110304 according to the standard ISO 1832: 4 letters describe geometry and construction, 3 numeric codes describe dimensions. Each field has a number, an icon, and a brief description.
ISO 1832 designation decoder — how to read the code
Positions 1–4 · ISO code
1VShape
35° rhombus
2 corners of 35° per side
2BClearance angle
α = 5°
positive, single-sided
3MTolerance
Class M (intermediate)
IC ±0.05 · thickness ±0.13 mm
4TType
Countersunk hole + chip breaker
countersink 40–60°, single-sided chip breaker
Positions 5–7 · dimensions [mm]
511Size
l = 11 mm
IC = 6.35 mm · 1/4″
603Thickness
s = 3.18 mm
between rake faces
704Corner radius
rε = 0.4 mm
code ÷ 10 → radius in mm
✓ 2 corners × 1 side = 2 cutting edges
holders with a V pocket (35° diamond) — external and internal turning
use, turning tool selection, and turning parameters
Two — the diamond has 2 acute 35° corners, while the positive, single-sided design (letter B) uses only one side of the insert. Once one corner is worn, simply rotate the insert in its pocket without changing the holder.
Holders with a V-shaped diamond pocket (IC 6.35 mm): for external turning SVJBR/L, SVHBR/L and SVZBR/L (right-hand and left-hand versions) and neutral SVVBN with cross sections of 12×12–25×25 mm; for internal turning, boring bars S16P–S25S with the suffix SVUBR/L, SVQBR/L, or SVXBR/L.
Only in corner radius: 0.2 mm is used for high-precision finishing at fine feeds, while 0.4 mm is a slightly stronger finishing version that provides a better surface finish. The remaining dimensions (IC 6.35 mm, side length 11 mm, thickness 3.18 mm) are identical.
Yes — grade H6310 covers group ISO M20-M40. Maintain a cutting speed of 110–230 m/min, a constant feed, and continuous emulsion cooling: austenitic steel conducts heat poorly and work-hardens when cutting is too slow.
No customer reviews for the moment.
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Użyj strzałek, aby zmieniać zdjęcia. Powiększaj przyciskami albo gestem szczypania. Zamknij galerię klawiszem Escape.
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.