Description
| Technical data | |
|---|---|
| Side length l | 9.7 mm |
| Insert thickness s | 3.97 mm |
| Hole diameter d1 | 4.4 mm |
| Corner radius rε | 0.8 mm |
| ANSI code | CCMT 32.52 |

finishing and semi-finishing — ISO groups P and M
| Material | Finishing | Semi-finishing | ||||
|---|---|---|---|---|---|---|
| Vc [m/min] | Feed f [mm/rev] | ap [mm] | Vc [m/min] | Feed f [mm/rev] | ap [mm] | |
| PSteel | 180-300 | 0.05-0.2 | 0.1-1.65 | 180-300 | 0.12-0.21 | 0.5-3 |
| MStainless steel | 90-150 | 0.05-0.2 | 0.1-1.65 | 90-150 | 0.12-0.21 | 0.5-3 |
single-sided 80° diamond with a hole and chip breaker
The CCMT 09T308 turning insert is a single-sided, rhombic indexable insert made of grade H6310 cemented carbide, designed for turning steel and stainless steel. Shape C, a rhombus with a 80° corner angle, combines a strong, rigid corner with good contour access during longitudinal turning and facing. The positive geometry with a 7° clearance angle reduces cutting forces, making the insert suitable for smaller lathes, slender workpieces, and boring. The countersunk hole for the clamping screw ensures stable seating in the holder pocket. Two corners and a single-sided chip breaker provide a total of two cutting edges per insert. The thin PVD coating increases the cutting edge's resistance to wear and elevated temperatures during cutting.
The CCMT 09T308 insert (also written without a space as CCMT09T308) is suitable for turning and boring shafts, bushings, and flanges made of structural steels, as well as stainless steel components. Calculate spindle speed using the formula n = 1000·Vc/(π·D): for a shaft diameter of 40 mm at Vc = 200 m/min, the result is approximately 1592 rpm. As the workpiece diameter decreases during a pass, increase spindle speed to maintain a constant cutting speed at the edge. For structural steels, start at the midpoint of the Vc range and adjust according to workpiece clamping rigidity. Indexable inserts in grade H6310 are supplied by the Korean brand Horn.
For stainless steel, maintain a cutting speed of 90–150 m/min, a constant feed rate, and a continuous supply of emulsion coolant — austenitic steel dissipates heat poorly and work-hardens when cutting is too slow. The positive geometry and single-sided chip breaker control chip flow and breaking during finishing and semi-finishing. For deeper passes in structural steel, select the feed rate and depth of cut from the cutting data table, staying within the range recommended for the specific chip breaker. Secure insert clamping with a screw through the countersunk hole reduces vibration and protects the cutting edge when machining slender workpieces.
Insert CCMT 09T308 is single-sided and positive — it provides only 2 cutting edges and geometry designed for finishing and semi-finishing. For heavy roughing at large depths of cut and interrupted cuts, select a stronger double-sided insert for a negative pocket (e.g. CNMG).
how to read the CCMT 09T308 code — positions 1–7 of the designation
Designation CCMT 09T308 according to the standard ISO 1832: 4 letters describe geometry and construction, 3 numeric codes describe dimensions. Each field has a number, an icon, and a brief description.
ISO 1832 designation decoder — how to read the code
Positions 1–4 · ISO code
1CShape
80° rhombus
2 corners of 80° per side
2CClearance angle
α = 7°
positive, single-sided
3MTolerance
Class M (intermediate)
IC ±0.05 · thickness ±0.13 mm
4TType
Countersunk hole + chip breaker
countersink 40–60°, single-sided chip breaker
Positions 5–7 · dimensions [mm]
509Size
l = 9.7 mm
IC = 9.525 mm · 3/8″
6T3Thickness
s = 3.97 mm
between rake faces
708Corner radius
rε = 0.8 mm
code ÷ 10 → radius in mm
✓ 2 corners × 1 side = 2 cutting edges
holders with a 09 diamond-shaped pocket — external and internal turning
use, turning tool selection, and turning parameters
Two — the 80° diamond has 2 corners, and the positive, single-sided geometry (7° clearance angle) uses only one side of the insert. Once a cutting edge is dull, simply index the insert in its seat without changing the holder.
Holders with a 09 diamond-shaped pocket (IC 9.525 mm): for external turning SCLCR/L, SCMCN and SCACR/L with cross sections of 12×12–25×25 mm; for internal turning, boring bars S12K–S32T with the suffix SCLCR/L or SCFCR/L. The letter R denotes the right-hand version, and L the left-hand version.
Only in corner radius: 0.4 mm is used for finishing at low feed rates, 0.8 mm is the general-purpose version, and 1.2 mm is selected for higher feed rates and deeper passes. The remaining dimensions (IC 9.525 mm, thickness 3.97 mm) are identical.
Yes — grade H6310 covers group ISO M20-M40. Maintain a cutting speed of 90–150 m/min, a constant feed, and continuous emulsion cooling: austenitic steel conducts heat poorly and work-hardens when cutting is too slow.
No customer reviews for the moment.
All orders are delivered by courier company GLS. For orders exceeding 369 PLN gross shipping is FREE
| Courier GLS | Przelew24 / Prepayment | 14,76 zł gross | Delivery time 1 working day |
| Courier GLS | Cash on delivery | 17,26 zł gross | Lead time 1 working day |
Użyj strzałek, aby zmieniać zdjęcia. Powiększaj przyciskami albo gestem szczypania. Zamknij galerię klawiszem Escape.
This website uses its own and third-party cookies to improve our services and show you advertising related to your preferences by analyzing your browsing habits. To give your consent to its use, press the Accept button.